The resurgence of the popularity of the square body is undeniable at this point. The beautiful part about it is that the crowd that loves these trucks aren’t afraid to make them drivable and enjoyable again. It’s a real hot rod mindset that resembles those of the 50’s no pretentious numbers matching crowd this go around.
Got a few of these piece of shits all full of rust with thousands invested (mainly underneath)... both me and the woman daily them obviously hers is nicer and mine just gets beat on
That's a great point! I daily mine. Have a few more. Most of these squares are about 5 trucks in one these days😂 We just like good looking old rigs that are easy to work on, and we don't get all wrapped up in them fancy new technologies. Plus you can't fix them yourself, not on the side of the road anyways. Which a square will never leave you stranded if it's sorted out.
Your " Mortskie Minute " is always well put together. You really put some effort and research into them. Some of your previous teachers must watch the videos and be awfully proud of you. 🍻😁✌️
Kind of a shame that Chevy doesn't go back to the old square body design. Unfortunately, they'd much rather crank out those 4-Door Country Cadillac's, that they can sell for $100k instead of building a affordable, reliable, working man's truck.
Congratulations!! It was nice to see things go, relatively, easy for you. I know the public loves drama, me, I'm happy when a man doesn't have to replace another starter, or break a valve etc.etc.
It’s funny how I watch guys like you just to relax. When I’m at work and stressed out, I put on my ear buds and just have guys like you playing in my background. DD speed shop, Vice grip garage, Puddin fab shop, iron trap garage and YOU. Keeping a blue collar guy moving is what you guys do. God bless. Aloha from Hawaii🤙🏽
1973 to 1976 had a distinct smell inside, especially if it got wet at sometime in its life , 1977 had the best new truck smell i can remember, i was 12 when 73s came out , no drip rails above the doors until way late 73 or early 74 , they were an afterthought at best. Rubbery plastic junk that was held on with double sticky back tape with a screw at each end 75 came out with the metal ones that screwed on every 3 inches or so , major improvement.
So, I really appreciate the carb history. My dad had a ‘67 Buick Electra (yup, a duce and a quarter living room on wheels) with a 430ci Buick V8. It had a Rochester Quadrajet with the largest secondaries I’ve ever seen. I actually rebuilt that Quad when Inherited that beauty. Always appreciate your history lessons, Mortske.
I put a Holly eco master on my best friend's 1976 Nova with 305, bolted down, started car and adjusted idle speed. The next day he drove to California from Pennsylvania gave him 5 more mpg on his trip. He drove it for another 100,000 until body fell off frame and never did any other adjustments to carb.
I noticed your old school craftsmen wrenches... My dad worked with his starting in the late 50's & retired in 97'... He gave them to me about 10 yrs ago .. He told me a few times that Craftsman tools have a life time warranty .. I asked him who would warranty them & he said , "any Sears & Roebuck ". I didnt have the heart to tell him...
Yep!!! That battery terminal truck saved my 72 f100. My starter solenoid got stuck ON with my key off and thank goodness I had the negative terminal loose, otherwise it would have been a very bad day!
I’ve never messed with square body sticky bits but rubbing alcohol has worked really well for me in the past on sticky buttons & switches in late model Jaguars and Rovers.
Omg brother I ripped mine a while back it was thee worst pain I've ever had.. I was moving a fridge and I was a lil twisted and I pushed the top to scoot it over the threshold. Omg brother it ripped and I was done it felt like a tiger scratched my hip... I've felt some pain but the sciatica pain ohhh shyt I hope I never ever hurt that again. You can't do nothin but lay down and heal. I hope you bounce back. Get it bounce back😂
@@chicagovasko yeah my story isn’t quite as cool as yours… I was sitting down and sneezed 🤣. Almost fell off and to the ground. Never felt like that before, it’s awful
Agreed. It's still a mystery to this day, even among Chevy fans, as to what all the different series badges meant during these years when they all seemed very similar. ....Cheyenne, Scottsdale, Custom Deluxe, Custom, Bonanza.......
You're really giving me that swift kick in the butt that i need to settle my wiring issues on my 85, im picking up a 78 with a 350 that has a lot less miles on it to motor swap into so that i can take it on a couple hundred mile roadtrip to go on a moose hunt by october.
Ive always been a square body guy i always liked gmc and chevy trucks and vans. I learned to drive on a square body chevy and gmc van. My family had alot of 70s and 80s chevy and gmcs
Gotta love the economaster spread bore carburetors. A running driving square body for 400 delivered..what a deal! You, Mojo Duff, and carpenter Chin(what a guy) keep up the good work!
All of us either started driving in them or that's all we wanted as a teenager. I kick myself for selling my 76 short bed and always will. But being older it's time to snag one and put it together! Love the content
Had the flu last week, finally over that and got to enjoy your video today ! My father had a similar painted truck when I was a kid , brought back some memories ! 👍
Good afternoon from Cape Cod ⛵ Unbelievable! No starter problems, it's got breaks, and an out of the box Chinesium carburetor, the damn thing shifts and drives and does a cool burnout. All for 400 bucks. You can't beat that 👍 thanks for all your hard work and awesome content Mortske ✌️🇺🇲
Your next "Will It Run" should be a teleporter Mr. M.--you don't need a title for anything in my neck of the woods prior to 2000. She's worth fixing up around here! 7 yr old GM trucks here are in worse shape than that Squarebody! Beam me up Duff!🐶
Mortske and puddin should do a build off against junkyard digs and pole barn. And see who can flip it for more money and that money goes towards a build you guys all build together for a veteran! That's my dream series right there
Jeez Mortske your up early. Caught me on my 1st cup of coffee. Well now I got something to watch. The kid had my 55 Dodge "Rambo" all weekend. We had a bad carrier bearing. He did a nice rebuild. Were able to get a new bearing. Guess they still use that size. Smooth again. Cheers Buddy ☕🤛😎👍
Wouldn’t it be great if Chevy would go back to the square bodies??? Eeeeek!!! I would love it and so would a million others!! Thank you Mortske for saving the squares!
The worst quality trucks that Chevy has ever made are now the most popular and enjoying crazy prices down here in the South. They were like the “Vega” of Chevy trucks. Other than the square styling of them they sure didn’t have much going for them. Don’t hate the player, hate the game 😂.
Id take a Square body over any truck in that era I've seen Square bodies with the body rusted off and the frame in a few pieces. Pull a 35' trailer with 4 old heavy ass vehicles for 1,900 miles withe no problems other than. $150 in oil because it had 273,000 miles and had to change one u joint the factory one. Other than that made the whole trip with A/C working #LIKE A ROCK
@@MortskeRepair 2 lt pinto ohc, ford escorts. run a 450 holley.. when built hot.. better option is 900 /1000/1200 cc bike carbies.. never fail..better than SU,s.. 2 sets for a v8, 1.5 sets for a 6 cyl.. cheap & work.
Pull the drive train for the Nova and wait for a good body that needs a frame swap. Keep up the great content. 👍 That blue 3100 is an awsome looking truck.
I put the economaster cam , intake and carb on a 74 f350 tow truck 390 4bbl. The motor had more power , definite fuel mileage and it changed the sound of the motor.
Thanks Mortske, I hope you gave that scrap man some merch, you gotta keep them sweet! Nice truck, well nice parts truck! good seeing it going again, thanks for the video!
Square Body " TRIVIA ", IN 1973, I built the compression mold for the under dash round fuse block. General Motors , tools up two years in advance for the new trucks, and cars. I owned a 1975 C 10 , 12 years ago. It had the fuse block that I built the mold to manufacture them ! In the 80 's I made the door keystone die that pressed millions of stainless parts for the Square Body 's . The company that made them for G M , was Dominion Auto. A Canadian company, located in Sevierville. TN. I REPAIRED THE MIRROR STAINLESS STEEL HOUSING, ABOUT FOUR TIMES IN THE SAME PERIOD OF YEARS. THE RUN OF TRUCKS HAD HAD TO BE IN THE MILLIONS. I AM 84 YEARS OLD NOW, AND STILL BUILDING TOOLS ! I LATELY BUILT SOME STAINLESS SIDE TRIM FOR THE 1953 Buick Skylark convertible. I built a set of rolling dies, to crown the trim. Too much to say now. Enjoy so much your program, and Duff dog. How much for the 60 caddy ? Thanks
I love the stripes and I love the color. I love the tow mirrors. I love the white wheels. I don't care if she's rusting back into the Earth. She's a great-looking truck.
@@MortskeRepair It's hard to get a bad-looking squarebody though, honestly. I've got an 88 Blazer that was a GSA truck. USMC tan without being a CUCV. As plain as can be and I think it's gorgeous. Haha.
Although it's a scruffy old truck, it's got a certain charm about it and would look wonderful fixed up; here in the UK that would probably fetch over £10000 as it sits ! Great video content as always
This is always my favorite day of the week when it's a Mork ski video you should buy one of those you can work on pickup trucks and you walk up there and you kind of lay on the platform I saw one at the mechanic shop the other day and and he was using it on a car was awesome he was doing a manifold gasket I don't think they cost that much
Sadly when that cash for cars happened in NY State all those beautiful trucks were scrapped. Its hard to find anything like these beauties and those I love.
Back in '77 I purchased a Holley Economaster carb to replace a Quadrajet that I managed to warp the throttle plates. The fuel mileage went from 10mpg to 12mpg. Ran great for what I needed . I thought the new carb was fantastic and was half the price of a Quadrajet replacement. Was still on the truck when I sold it several years later. The truck was a '73 squarebody with a 350cid.
Here in the rust belt, that truck would be prime as a builder as long as the frame is good. New bed and some off shore body panels you got a driver for years.
once again you have saved another square body from the crusher.doner or not she runs! and realy thats all that matters!thanks mortske!!!and duff!! love the burn out.that small block is game for whatever.
Excellent video Mortske :) , MOJO :), Chin :) , Duff Dog 🐕,, , yes I Ecnomaster 450 CFM carb 4 barrel never did anything with ever yet also grill in those Square bodies people I like is has motor badges of 350 , 400 , 454 ones plus GMC or Chevrolet bow tie plus Orgnail chrome dog dish hubcaps , chrome diamond mirrors and so much more too ! I learn drive 1978 GMC High Series Serria Scottdale 25 3/4 ton , navy blue plus baby blue body , interior with 3 fork bars mirrors , 350 V8 motor 4 barrel carb , Turbo 400 3 speed Automatic transmission with 411 12 bolt rear end gears, single exhaust plus fuel tank , Am radio with pop rod antenna on left fender , Canada style gauges and 1 ton suspension 12 leaf springs on back ! It had Power Steering also Brakes too ! Also my late Dad , his brother my uncle bought in 3 month of 1983 had till 1994 !
@Mortske...there is another Holley variant that combines the spreadbore with a double pumper dual bowls when you quadrabog fails. Oh and Vice Grip Garage found a product called Bullsnot! that destroys the odor in vehicles.
You are right about the power train, seems decent enough to add to a better frame. This one would take an awful lot of patch and fit to ever be a keeper, or just s driver. The fate of a lot of old Chev's..... the rust is winning. Chev did have some great color combos, Red & White, tan and chocolate, sky blue navy blue, Red & Dark grey... Black & Silver....Cheers
Your cheapness is getting old Wasting 20 minutes of my time over spark plugs is BS👎
Based on your comment your time isn’t even worth as much as an old used up spark plug.
@@MortskeRepair Just take a wire wheel to him, he'll be fine.
Mr. Hand , it's Our Time !😊
@@MortskeRepair When I get bored, I just scootch ahead about 20 minutes on the video.
@@jdfmfb03 T.O.T.W.! 🎉🥇🎈
The resurgence of the popularity of the square body is undeniable at this point. The beautiful part about it is that the crowd that loves these trucks aren’t afraid to make them drivable and enjoyable again. It’s a real hot rod mindset that resembles those of the 50’s no pretentious numbers matching crowd this go around.
100% agree.
I love my 1980 GMC square body. I'll never sell it !!
Got a few of these piece of shits all full of rust with thousands invested (mainly underneath)... both me and the woman daily them obviously hers is nicer and mine just gets beat on
That's a great point! I daily mine. Have a few more. Most of these squares are about 5 trucks in one these days😂
We just like good looking old rigs that are easy to work on, and we don't get all wrapped up in them fancy new technologies. Plus you can't fix them yourself, not on the side of the road anyways. Which a square will never leave you stranded if it's sorted out.
Agreed! I’m 19 and I’ve had four or five since I was 15. And I’ve never owned anything else! I love and still daily mine
If puddin has squarebody content tonight it will be the best day ever!
I bet it will be on Ol' Roy!
He does!
@@bluerazor7049 it is up now
Yee YEE
Been watching some of these channels,car rescue. Love what you all are doing keeping these old gems out of the shredder.
Thanks
It's raining here today so it's a perfect day for a Mortske Monday video! 😁👍
Perfect!
Mortske's squarebody content is my favorite content.
Your " Mortskie Minute " is always well put together. You really put some effort and research into them. Some of your previous teachers must watch the videos and be awfully proud of you. 🍻😁✌️
Thank you very much!
Kind of a shame that Chevy doesn't go back to the old square body design. Unfortunately, they'd much rather crank out those 4-Door Country Cadillac's, that they can sell for $100k instead of building a affordable, reliable, working man's truck.
Congratulations!! It was nice to see things go, relatively, easy for you. I know the public loves drama, me, I'm happy when a man doesn't have to replace another starter, or break a valve etc.etc.
So true!
I bet that truck was absolutely beautiful with that paint and decals scheme when new, and would be again and worth it if restored.
It's not worth nothing that rust is way to far
Agreed
It’s funny how I watch guys like you just to relax. When I’m at work and stressed out, I put on my ear buds and just have guys like you playing in my background. DD speed shop, Vice grip garage, Puddin fab shop, iron trap garage and YOU. Keeping a blue collar guy moving is what you guys do. God bless. Aloha from Hawaii🤙🏽
Our pleasure!
1973 to 1976 had a distinct smell inside, especially if it got wet at sometime in its life , 1977 had the best new truck smell i can remember, i was 12 when 73s came out , no drip rails above the doors until way late 73 or early 74 , they were an afterthought at best. Rubbery plastic junk that was held on with double sticky back tape with a screw at each end 75 came out with the metal ones that screwed on every 3 inches or so , major improvement.
Interesting
So, I really appreciate the carb history. My dad had a ‘67 Buick Electra (yup, a duce and a quarter living room on wheels) with a 430ci Buick V8. It had a Rochester Quadrajet with the largest secondaries I’ve ever seen. I actually rebuilt that Quad when Inherited that beauty. Always appreciate your history lessons, Mortske.
Awesome
DANG! That is a lot of fun for 400 big ones! ❤
I put a Holly eco master on my best friend's 1976 Nova with 305, bolted down, started car and adjusted idle speed. The next day he drove to California from Pennsylvania gave him
5 more mpg on his trip. He drove it for another 100,000 until body fell off frame and never did any other adjustments to carb.
Awesome
I noticed your old school craftsmen wrenches...
My dad worked with his starting in the late 50's & retired in 97'...
He gave them to me about 10 yrs ago ..
He told me a few times that Craftsman tools have a life time warranty ..
I asked him who would warranty them & he said , "any Sears & Roebuck ".
I didnt have the heart to tell him...
Yep!!! That battery terminal truck saved my 72 f100. My starter solenoid got stuck ON with my key off and thank goodness I had the negative terminal loose, otherwise it would have been a very bad day!
Right on
Thanks mr mortske for another great video. I appreciate the time and effort put into the content .👍
My pleasure!
I’ve never messed with square body sticky bits but rubbing alcohol has worked really well for me in the past on sticky buttons & switches in late model Jaguars and Rovers.
Laying here with terrible sciatica pain past couple days, not able to work on my junk so it’s nice to have a new mortske Monday morning to enjoy
Omg brother I ripped mine a while back it was thee worst pain I've ever had.. I was moving a fridge and I was a lil twisted and I pushed the top to scoot it over the threshold. Omg brother it ripped and I was done it felt like a tiger scratched my hip... I've felt some pain but the sciatica pain ohhh shyt I hope I never ever hurt that again. You can't do nothin but lay down and heal. I hope you bounce back. Get it bounce back😂
@@chicagovasko yeah my story isn’t quite as cool as yours… I was sitting down and sneezed 🤣. Almost fell off and to the ground. Never felt like that before, it’s awful
Get well soon
@@MortskeRepair thank you sir mortske
I remember these trucks (like a rock) they were everywhere, can't believe how time has turned these road rocks into precious classics. Jesse
It's sammich time! Thanks Mortske World Wide for another mint Mortske Monday 🐾🍺
Enjoy!
Was honestly sad to see only 44 minute's! Thanks for the good content on Monday morning.
Sorry!
The various square body models and trim levels would be a good Mortske minute.
Noted
Agreed. It's still a mystery to this day, even among Chevy fans, as to what all the different series badges meant during these years when they all seemed very similar. ....Cheyenne, Scottsdale, Custom Deluxe, Custom, Bonanza.......
You're really giving me that swift kick in the butt that i need to settle my wiring issues on my 85, im picking up a 78 with a 350 that has a lot less miles on it to motor swap into so that i can take it on a couple hundred mile roadtrip to go on a moose hunt by october.
Good luck
At 23:03 you said, ‘Never mind Mojo pressure washing.’ All I pictured was Majo pressure washing in PFS cut off overall bib shorts! Hahaha
Ive always been a square body guy i always liked gmc and chevy trucks and vans. I learned to drive on a square body chevy and gmc van. My family had alot of 70s and 80s chevy and gmcs
Awesome
Thank you for sharing and your APPRECIATION to your subscribers Sir Mortske
I appreciate that!
Gotta love the economaster spread bore carburetors. A running driving square body for 400 delivered..what a deal! You, Mojo Duff, and carpenter Chin(what a guy) keep up the good work!
You got that right!
All of us either started driving in them or that's all we wanted as a teenager. I kick myself for selling my 76 short bed and always will. But being older it's time to snag one and put it together! Love the content
Had the flu last week, finally over that and got to enjoy your video today ! My father had a similar painted truck when I was a kid , brought back some memories ! 👍
Sorry to hear that
Passenger side tank is main tank on 73 to 80 , driver side is main tank on 81 and up
The paint scheme on that thing is sweet. Used to be a nice old rig. Impressed with the chinajet. Did pretty dang good
Agreed
Ole Puddin would be proud of you. You finally got a working starter!
Lol
Another great Mortske Monday. Thank you another great video with Duff. I like the old square bodies. Have great week.
Same tonyou
Yet another will it run adventure with Mr. Mortske! Just the greatest! 🐱♥️
I just opened the video and I'm here to say $400 sounds like a steal at first glance. Not too shabby Mortske!
Another good one thanks 🍻
Glad you enjoyed it
Had a 80 model Scottsdale years ago. One of the best trucks ive ever owned.
Love square body content!
Two tone. Absolutely! My first pickup was a 1978 3/4 ton 4x4 . Maroon and silver. Beautiful truck. Sure wish I had it today 😢
As long as there's Duff and cold sandwiches, I'll be here.
Good afternoon from Cape Cod ⛵ Unbelievable! No starter problems, it's got breaks, and an out of the box Chinesium carburetor, the damn thing shifts and drives and does a cool burnout. All for 400 bucks. You can't beat that 👍 thanks for all your hard work and awesome content Mortske ✌️🇺🇲
Dang right
Thanks Mortske . For getting this square body running. Yes I agree a donor for sure. It’s a rust bucket. And driving. 💯👊👍
Our pleasure
She's got another 100k of daily driving in her.
Your next "Will It Run" should be a teleporter Mr. M.--you don't need a title for anything in my neck of the woods prior to 2000. She's worth fixing up around here! 7 yr old GM trucks here are in worse shape than that Squarebody! Beam me up Duff!🐶
Nice job with the carb. I love the square bodies. I had one years ago and this brought back several memories.
Thanks
Ohh 400!?!?!???!!????!!!!!! Beauty
Yeah another one for the back row! Plenty of parts!
Oldtimers used to use nylons for emergency fan belts back in the day. Ask Mojo. 😉✌
Interesting!
@@MortskeRepair some Pott County engineering. 😁✌
Chrome won't get ya home but your old lady's skibbs will. 🤣
Another one saved from the crusher. Thanks Mortske!!
Our pleasure
A little hot sauce and a new carb, she fired right up.... What a deal!!!!
Love me a squarebody, i have a 1988 R30 i body swapped onto a 2003 2500hd 4x4 frame with a Duramax Diesel. Thanks for another great episode
Right on!
Mortske and puddin should do a build off against junkyard digs and pole barn. And see who can flip it for more money and that money goes towards a build you guys all build together for a veteran! That's my dream series right there
Jeez Mortske your up early. Caught me on my 1st cup of coffee. Well now I got something to watch. The kid had my 55 Dodge "Rambo" all weekend. We had a bad carrier bearing. He did a nice rebuild. Were able to get a new bearing. Guess they still use that size. Smooth again. Cheers Buddy ☕🤛😎👍
Yes Sir!!!
Also thanks for always answering me your the only one I watch that does pudding never does
nylons and abandoned socks? i’d have had gloves on up to my elbows.
That’s a good weekend for the Mortske. 😂
Lol live a little
Wouldn’t it be great if Chevy would go back to the square bodies??? Eeeeek!!! I would love it and so would a million others!!
Thank you Mortske for saving the squares!
Our pleasure
The worst quality trucks that Chevy has ever made are now the most popular and enjoying crazy prices down here in the South. They were like the “Vega” of Chevy trucks. Other than the square styling of them they sure didn’t have much going for them. Don’t hate the player, hate the game 😂.
I beg to differ. 07-13 are worse by far.
@@MortskeRepair im with mortske they were better than the obs an later
@@peterselten500 Funny that the 88-98 GMT-400s are called the "Old Body Style", when they're newer than any of the classics.
Id take a Square body over any truck in that era I've seen Square bodies with the body rusted off and the frame in a few pieces. Pull a 35' trailer with 4 old heavy ass vehicles for 1,900 miles withe no problems other than. $150 in oil because it had 273,000 miles and had to change one u joint the factory one. Other than that made the whole trip with A/C working
#LIKE A ROCK
@@MortskeRepair 2 lt pinto ohc, ford escorts. run a 450 holley.. when built hot.. better option is 900 /1000/1200 cc bike carbies.. never fail..better than SU,s.. 2 sets for a v8, 1.5 sets for a 6 cyl.. cheap & work.
Pull the drive train for the Nova and wait for a good body that needs a frame swap. Keep up the great content. 👍
That blue 3100 is an awsome looking truck.
Thanks 👍
We appreciate You Equally Mortske
Awesome
I put the economaster cam , intake and carb on a 74 f350 tow truck 390 4bbl. The motor had more power , definite fuel mileage and it changed the sound of the motor.
Nice colour way! absolutely love a square body. nice one morts!
Thank you! Cheers!
Thanks Mortske, I hope you gave that scrap man some merch, you gotta keep them sweet! Nice truck, well nice parts truck! good seeing it going again, thanks for the video!
You bet
good ol beater with a heater motor would work out good in that car and a few spare parts. cool the carb worked so good. cheers guys.
Thanks 👍
Square Body " TRIVIA ",
IN 1973, I built the compression mold for the under dash round fuse block.
General Motors , tools up two years in advance for the new trucks, and cars.
I owned a 1975 C 10 , 12 years ago. It had the fuse block that I built the mold to manufacture them !
In the 80 's I made the door keystone die that pressed millions of stainless parts for the Square Body 's .
The company that made them for G M , was Dominion Auto. A Canadian company, located in Sevierville. TN.
I REPAIRED THE MIRROR STAINLESS STEEL HOUSING, ABOUT FOUR TIMES IN THE SAME PERIOD OF YEARS.
THE RUN OF TRUCKS HAD HAD TO BE IN THE MILLIONS.
I AM 84 YEARS OLD NOW, AND STILL BUILDING TOOLS !
I LATELY BUILT SOME STAINLESS SIDE TRIM FOR THE 1953 Buick Skylark convertible.
I built a set of rolling dies, to crown the trim.
Too much to say now.
Enjoy so much your program, and Duff dog.
How much for the 60 caddy ?
Thanks
Awesome
I found a fuse block (old GM) and it included a spot labeled CB Radio. I love that, since I own a shop and work on them.
I was glad to see you got the old square body going good video Mortske
Much appreciated
I love the stripes and I love the color. I love the tow mirrors. I love the white wheels.
I don't care if she's rusting back into the Earth. She's a great-looking truck.
It’s not bad
@@MortskeRepair It's hard to get a bad-looking squarebody though, honestly. I've got an 88 Blazer that was a GSA truck. USMC tan without being a CUCV. As plain as can be and I think it's gorgeous. Haha.
It probably feels good getting a square body running, Duff got a ride, that sounds good for the nova biuld !!!!!!!😊
Although it's a scruffy old truck, it's got a certain charm about it and would look wonderful fixed up; here in the UK that would probably fetch over £10000 as it sits ! Great video content as always
Right on
I was almost jealous of the relatively rust free trucks you guys have out there for cheap. Until I saw it.
Great advice on those hood hinge! Almost to T what my papa taught me when he gave me the 79 K5 when I was 13 haha. RIP🙏🏼
Right on
❤ my super scrapper! Worked great on gasket surfaces.
That's great!
Dude!!! Nova, Nova,Nova,Nova!!! Weld the spiders and make the neighbors jealous!!!✌️
Right on
This is always my favorite day of the week when it's a Mork ski video you should buy one of those you can work on pickup trucks and you walk up there and you kind of lay on the platform I saw one at the mechanic shop the other day and and he was using it on a car was awesome he was doing a manifold gasket I don't think they cost that much
We got one
Pressure washing, 2 videos in a row !!! Outstanding 👍😂
More to come!
Sadly when that cash for cars happened in NY State all those beautiful trucks were scrapped. Its hard to find anything like these beauties and those I love.
“Cash For Cars”, commie environmentalism gone wrong.
Hey Mortske and Duff 👋, thanks for the video. It was a great day. A runner with a Amazon carb. Have a great week ahead.👍
Thanks! You too!
Always good to see you and Duff.
Great vid , top tip oiling hood hinges, somebody. Needed to address this problematic issue, thanks for sharing 👍💨💨
Glad to help
Back in '77 I purchased a Holley Economaster carb to replace a Quadrajet that I managed to warp the throttle plates. The fuel mileage went from 10mpg to 12mpg. Ran great for what I needed . I thought the new carb was fantastic and was half the price of a Quadrajet replacement. Was still on the truck when I sold it several years later. The truck was a '73 squarebody with a 350cid.
Very cool!
I bought a Maxspeedingrod
inverter generator 120/240 volt !Electric start. Works very well and 240 v is rare on inverters.
Mondays square body content for a win...good stuff...thanks..🔧🔧👍
You bet
mornings with the boss make the day o k . thanks for the show.
I love these square body trucks. There are a few knocking about in the UK but they're not easy to get.
I bet
I appreciate you thanks for the Entertainment
Our pleasure
Great scrapyard score. I agree, pluck the motor/trans and drop it in the 72 Nova. You see way more pickups than you do Novas.
That sweet guitar was perfect for the Square Body video showcase at the end !!
Glad you liked it!
Love when you bring home a square body. I like the name China Jet the best 😂
Lol
Here in the rust belt, that truck would be prime as a builder as long as the frame is good. New bed and some off shore body panels you got a driver for years.
Come get it!
Like the paint scheme on it!
Me too
The guitar at the end was sooooooo good, I had to hang until the verrrrry end😊
Much appreciated
once again you have saved another square body from the crusher.doner or not she runs! and realy thats all that matters!thanks mortske!!!and duff!! love the burn out.that small block is game for whatever.
Nice job sir Nice chevrolet 1975 C10 congratulations to you sir show 😃👏👏👏👏👍👍👍👍
Thank you! 👍
Excellent video Mortske :) , MOJO :), Chin :) , Duff Dog 🐕,, , yes I Ecnomaster 450 CFM carb 4 barrel never did anything with ever yet also grill in those Square bodies people I like is has motor badges of 350 , 400 , 454 ones plus GMC or Chevrolet bow tie plus Orgnail chrome dog dish hubcaps , chrome diamond mirrors and so much more too ! I learn drive 1978 GMC High Series Serria Scottdale 25 3/4 ton , navy blue plus baby blue body , interior with 3 fork bars mirrors , 350 V8 motor 4 barrel carb , Turbo 400 3 speed Automatic transmission with 411 12 bolt rear end gears, single exhaust plus fuel tank , Am radio with pop rod antenna on left fender , Canada style gauges and 1 ton suspension 12 leaf springs on back ! It had Power Steering also Brakes too ! Also my late Dad , his brother my uncle bought in 3 month of 1983 had till 1994 !
@Mortske...there is another Holley variant that combines the spreadbore with a double pumper dual bowls when you quadrabog fails. Oh and Vice Grip Garage found a product called Bullsnot! that destroys the odor in vehicles.
Duffers loves his R I D E S! Another great video brother
Right on!
30:08 good to see the Hawk Tuah’24 sticker. I’d vote for that no question.
Exactly
That's a cool looking paint scheme! Must have been a beauty when new. Great video again!
Yes it was!
You are right about the power train, seems decent enough to add to a better frame. This one would take an awful lot of patch and fit to ever be a keeper, or just s driver. The fate of a lot of old Chev's..... the rust is winning. Chev did have some great color combos, Red & White, tan and chocolate, sky blue navy blue, Red & Dark grey... Black & Silver....Cheers