thank you vance and hines for wanting us to become DIY people instead of take it to the shop people. i feel more comfortable knowing that im doing the work and making sure i do a good job. thank you.
I bought a Vance and Hines Drak VO2 Air Intake, a V&H Fuel Pak and a V&H 2 into 1 Pro Pipe exhaust. I installed these and some other items the last weekend in Feb. 2015. When I cranked my 2009 Dyna Super Glide up, I was amazed at the instant start, smooth operation and tremendous power boost. I figure I gained a 12-15% increase in horsepower from the V&H products alone and the programming and installation for the Fuel Pak itself was straightforward. I would recommend these V&H products the best way I know how - I bought them, installed them and they REALLY work.
Put one on my 09 when I bought it new. Put on new pipes and a SE air cleaner. I only have 10k miles on it now. I just installed new 551 S&S cams. While researching what I wanted/needed to do the job, I found out that the Fuelpak does not work with my application. Wanting to stay with V&H, I asked them which turner I should use with my application. They recommend the FP3. However, they discontinued it. How does a company recommend a product they no long make? I was told the FP4 will not work. So, I ordered a Power Commander. Should be getting it today.
I have a question please.. I just picked up a 2007 FXDB Street Bob It has the FUELPAK classic on it. The one that you need to program the values in with the buttons on the Fuelpak itself. The guy I bought it from said the bike had been sitting for 2 years with a dead battery.. I am wondering if I need to re program the FUELPAK? Has there been any updates to the map settings over the years? It does run pretty goo but the idle seems a bit high. My current setup is* Vance and Hines Straightshots slip ons Standard baffle Stage 1 screaming Eagle air cleaner assembly with a k&N filter (which says Kuyurukan on it? Maybe its a Kuyurukan stage 1 filter housing. I am not sure. And I have the stock air filter cover on it. Engine internals are stock. Thank you in advance.
I’ve been running the short shots no baffles map and I’m switching to baffles back in. There’s modes that have a value that now say N/a with the new map. Would I use 0 for N/A in that case?
18 Value Settings after you get by installing the Fulepak, I don't know if my back can stand over it that long. If I can it will be worth it, I HOPE ! ! !
My Vance & Hines Fuelpak Throttlepak works great, I've got the Drak VO2 air filter and Power Duals oval full header system, W/Std Baffles. I'm get 52 MPG and my 2009 HD Ultra Custom just runs so Sweet, and sounds great. You need in my oppion shut you mouth Justyn!
Ok so here is my Q!!. I currently have this Fuelpak in the video... however I just bought and have the FP3 which i want to swap out to. If I remove this current pak, and just plug the ECM back in, will it restore to the factory MAP??
i have a 2014 raptor 700r with a K&N pro flow air filter and monster dual exhausts since my raptor is fuel injected do i still need to buy a fuel module ? or will the fuel injection add fuel when needed ? thank you
Adam, no i did not. Still pops on decel. An after every time i start it it will stutter on acceleration once. Hard to explain but the first time u get on it after starting it whether its five minutes in or just after u take off. It cuts out for a brief second. You may have better luck but do your research first.
do not buy fuelpack. I know its a bit cheaper and looks like and easy plug and play feature, but by far the worst product on the market. of everyone I have talked to that owned one id say 7 out of ten have moved on to other products. I have had problems with mine from day one with a stutter in the fuel delivery and a ton of decal popping the first five minutes after startup. fuelpack customer service was no help at all and simply just gave me another map and said "well this should work". this went on for weeks. not to mention their codes are a huge secret as to what they are. not sure why anyone would try and replicate their product anyways. STAY CLEAR OR ATLEAST DO YOUR RESEARCH ON THIS PRODUCT. this product is so terrible people have posted videos of themselves running it over in their cars, wish I thought of that.
Sounds like you need to fix your bike unless you have a shop do it for you but it's not the fuelpak if it happens when you have it unplugged also soo dont blame them for your problems just because you dont know what's wrong
I still have this item on my bike with 0 problems ever. It helped the 1450 tremendously. I am sure there has been intermittent issues Some from FP And with end user.
I did this on my stock 2015 sportster.Just loaded the stock map from V&H. Great Boost and easy install...Highly reccomended
I was happy to see this video, my motorcycle has a FUELPAK similar to the one you show, I will follow your instructions.
thank you vance and hines for wanting us to become DIY people instead of take it to the shop people. i feel more comfortable knowing that im doing the work and making sure i do a good job. thank you.
Hitting buttons isnt doing any work boss. Sorry but its not. Now adjusting valves thats doing work.
I bought a Vance and Hines Drak VO2 Air Intake, a V&H Fuel Pak and a V&H 2 into 1 Pro Pipe exhaust. I installed these and some other items the last weekend in Feb. 2015. When I cranked my 2009 Dyna Super Glide up, I was amazed at the instant start, smooth operation and tremendous power boost. I figure I gained a 12-15% increase in horsepower from the V&H products alone and the programming and installation for the Fuel Pak itself was straightforward. I would recommend these V&H products the best way I know how - I bought them, installed them and they REALLY work.
Put one on my 09 when I bought it new. Put on new pipes and a SE air cleaner. I only have 10k miles on it now. I just installed new 551 S&S cams. While researching what I wanted/needed to do the job, I found out that the Fuelpak does not work with my application. Wanting to stay with V&H, I asked them which turner I should use with my application. They recommend the FP3. However, they discontinued it. How does a company recommend a product they no long make? I was told the FP4 will not work. So, I ordered a Power Commander. Should be getting it today.
I have a question please.. I just picked up a 2007 FXDB Street Bob
It has the FUELPAK classic on it. The one that you need to program the values in with the buttons on the Fuelpak itself. The guy I bought it from said the bike had been sitting for 2 years with a dead battery.. I am wondering if I need to re program the FUELPAK? Has there been any updates to the map settings over the years? It does run pretty goo but the idle seems a bit high.
My current setup is*
Vance and Hines Straightshots slip ons
Standard baffle
Stage 1 screaming Eagle air cleaner assembly with a k&N filter (which says Kuyurukan on it? Maybe its a Kuyurukan stage 1 filter housing. I am not sure. And I have the stock air filter cover on it.
Engine internals are stock.
Thank you in advance.
Did you get an answer
I’ve been running the short shots no baffles map and I’m switching to baffles back in. There’s modes that have a value that now say N/a with the new map. Would I use 0 for N/A in that case?
18 Value Settings after you get by installing the Fulepak, I don't know if my back can stand over it that long. If I can it will be worth it, I HOPE ! ! !
My Vance & Hines Fuelpak Throttlepak works great, I've got the Drak VO2 air filter and Power Duals oval full header system, W/Std Baffles. I'm get 52 MPG and my 2009 HD Ultra Custom just runs so Sweet, and sounds great. You need in my oppion shut you mouth Justyn!
Ok so here is my Q!!. I currently have this Fuelpak in the video... however I just bought and have the FP3 which i want to swap out to. If I remove this current pak, and just plug the ECM back in, will it restore to the factory MAP??
Yes it will
My settings wont go down to recomended settings? It just blinks and only adjusts so far down
Can anyone tell me if i can use a used fuelpak 2 or are you only able to connect them to one bike?
i have a 2014 raptor 700r with a K&N pro flow air filter and monster dual exhausts since my raptor is fuel injected do i still need to buy a fuel module ? or will the fuel injection add fuel when needed ? thank you
Yes. You need fuel management system.
The fuelpak led display comes on as soon as I start it but goes away after a second and won't respond to any buttons being pushed.
RobOn2Wheels did you resolve this problema?
Mine does this, and I still haven't fathomed how to get around it
Adam, no i did not. Still pops on decel. An after every time i start it it will stutter on acceleration once. Hard to explain but the first time u get on it after starting it whether its five minutes in or just after u take off. It cuts out for a brief second. You may have better luck but do your research first.
Sounds like you have a crapy motorcycle not the fuelpak
does anyone know the codes for 2013 1200 Sportster to install my fuel pack did not come with diagram
I took this tuner off of my 05 wideglide
Now. It won't start. Just cranks.
Fuel pak settings chart
V & H fuel pack FI
Can't shut off autotune, what's up with that??
Oh no . I can't even program a cheap watch and as for my Radio Control gear , I've given up . This does not fill me with joy .
do not buy fuelpack. I know its a bit cheaper and looks like and easy plug and play feature, but by far the worst product on the market. of everyone I have talked to that owned one id say 7 out of ten have moved on to other products. I have had problems with mine from day one with a stutter in the fuel delivery and a ton of decal popping the first five minutes after startup. fuelpack customer service was no help at all and simply just gave me another map and said "well this should work". this went on for weeks. not to mention their codes are a huge secret as to what they are. not sure why anyone would try and replicate their product anyways. STAY CLEAR OR ATLEAST DO YOUR RESEARCH ON THIS PRODUCT. this product is so terrible people have posted videos of themselves running it over in their cars, wish I thought of that.
Did you ever get the studdering resolved and if so what was the problem? Adam.
Sounds like you need to fix your bike unless you have a shop do it for you but it's not the fuelpak if it happens when you have it unplugged also soo dont blame them for your problems just because you dont know what's wrong
Mine is so bad it's shutting my Harley down this product is trash
I still have this item on my bike with 0 problems ever. It helped the 1450 tremendously. I am sure there has been intermittent issues Some from FP And with end user.
Put a carb on it,lol,just kidding,kinda.