I bought another cheap Ducati! Can I make profit on a 749 project?

Поділитися
Вставка
  • Опубліковано 3 гру 2022
  • Dave got an itchy trigger finger and pulled the pin on another cheap Ducati, but will it lead to profit or will it be a nightmare in a pretty red dress?
    In episode one Dave strips the 749 and uncovers what he's really bought
    obsessionengineering.co.uk/
  • Авто та транспорт

КОМЕНТАРІ • 66

  • @flamintasty
    @flamintasty Рік тому +6

    Dave, I can store some bikes for you. I’ll even ride them to keep them tickety boo for you 😂

  • @paulreed6089
    @paulreed6089 Рік тому +1

    Polar white base with ford cardinal red from duplicolor matches the factory paint very well. My 749 has mega upgrades and mega hours of cleaning and is now monoposto with fullsix carbon fiber seat cowl. Nice bikes!

  • @hazabaijan
    @hazabaijan Рік тому +4

    Yes Dave! Your 748 series kept me from losing my mind during lockdown, and is part of the reason why I now own a 996. Hope to see you again at Rapid track days next year 🙏

    • @TheOriginalCoda
      @TheOriginalCoda Рік тому +3

      It's the same reason I now own a 748 😂 Damn you Dave.

  • @stephenbeamis1151
    @stephenbeamis1151 Рік тому +2

    Nice tip with the scotchbrite pad gives it just the right amount of shine 👍 thanks will give it a go

  • @howardrathbone2120
    @howardrathbone2120 Рік тому +2

    A Ducati 749 has just come up for sale in Perth WA for $5k cheap! Oh did I mention it doesn’t run 😢

  • @spencerabaker
    @spencerabaker Рік тому +1

    Haaaaang about.... rewind to last round of BSB, and we were chatting at Paddock Hill about a 749R I was about to buy.... then a 749 magically appears on the channel!!! Can i claim an influencer fee on any YT revenues?! 😂😂
    Just kidding, was great meeting you and Franco after his double in the junior s/stocks. As it happens, my 749R didn't happen (the dealer i mentioned went back on the deal where BSD were going to service it). Soooo.... very much like you, I bought a 999 Bip last weekend, a mk2 from a forum member; 14k miles with a very large servicing receipt just completed. A few cosmetic bits to do, and a fairing-off detail, but nothing major. Can't wait to ride it, bloody weather.....grrr.
    Thanks for the content Dave, very much enjoying it and maybe bump into you at Brands next season (good luck Franco!)

    • @obsession_engineering
      @obsession_engineering  Рік тому +1

      I remember that chat... Which is unusual for me 😁
      I feel your pain regarding the weather

  • @stephenbooty3773
    @stephenbooty3773 Рік тому +1

    Look forward to seeing the vids through winter boredom. 👍🏻

  • @troywee4774
    @troywee4774 Рік тому +1

    splendid upload mate as always thanks for the share! cheers.

  • @RoryMacdonald-pfff
    @RoryMacdonald-pfff Рік тому +1

    It’s certainly the weather for getting stuck into a project bike - no shortage of rain in the background 🎉 Going to enjoy watching this one

  • @hilbilchillbil
    @hilbilchillbil Рік тому +1

    Great Ducati project looking forward to the next episodes

  • @bertzx9r894
    @bertzx9r894 Рік тому +3

    Buzzing to see this series. I too, like everyone else here, just love watching you work. I dont think any of us would mind feature-legth edits of the whole process. Watching you carry out your work is just as Zen as doing it myself, and that isn't the same when it comes to anyone else, even though others still make for enjoyable viewing.
    Hopimg for regular uploads on this ☺️

    • @obsession_engineering
      @obsession_engineering  Рік тому

      Not sure my laptop can cope with feature length 😂
      But really do appreciate the positive feedback

  • @ryanpierce9793
    @ryanpierce9793 Рік тому +1

    OOOOh can't wait! I've picked up a lot of small techniques from Dave's process that I've adapted into my mechanical process. Dave's a rare one, top rider and wrench man!!

  • @jhstony
    @jhstony Рік тому +1

    I love these fixing videos the best Dave 👍🏻 brilliant thanks

  • @petrolated
    @petrolated Рік тому +1

    Terblanche brilliance. Had an 749s and now a 1098s and the amount of screws to remove the fairing on the 1098s compared to the 749 is just ridiculous. A bit more punch though! 😆

  • @Vtwin_Superbikes
    @Vtwin_Superbikes Рік тому +1

    Inspiring as always, Davros 👌🏼

  • @garrybroughton1375
    @garrybroughton1375 Рік тому +1

    Just came across it on ebay, and had to search for the video’s. Great work as always Dave 👌 thanks for the gearing tip at Scarborough aswel

  • @stuwhite1969
    @stuwhite1969 Рік тому +4

    I love your videos!
    Other bike technicians take note! Dave's work ethic is the reason he can afford the watch he as on!!

    • @obsession_engineering
      @obsession_engineering  Рік тому +1

      Ah yes, my christopher ward C11... It's my daily beater but still very cool

  • @cecilwilson5442
    @cecilwilson5442 Рік тому

    Good because they are a nice appreciating classic bike,,very much over looked ,,👍 looking forward to seeing the next part

  • @danielstafford7255
    @danielstafford7255 Рік тому +2

    Could of carried on watching this all day, can we have atleast a 3hr episode next time please 🤣

  • @deborahchesser7375
    @deborahchesser7375 Рік тому +2

    That dry clutch always bugged me the way they rattle, although at 70 on the back wheel of an 1100 Hyper, it’s not noticeable lol. If you have one, I have two words for you, STEERING DAMPER

  • @Skid2933
    @Skid2933 Рік тому +1

    Nice one Wavey...... btw, those wooden footrest stands at the end of the vid look familiar !

  • @anthonyoriordan5967
    @anthonyoriordan5967 Рік тому +1

    Dave another epic bike re- jeuvenation build series 👌

  • @johngarrity6942
    @johngarrity6942 Рік тому +1

    Very interesting stuff, great tips on bike maintenance, looking forward to the next video as I have two Ducatis, just subscribed ! 🏍🏍🏍

    • @mikeducat8729
      @mikeducat8729 9 місяців тому

      ua-cam.com/video/OS5q7riOk8Y/v-deo.html&pp=gAQBiAQB

  • @speedyakakevin
    @speedyakakevin Рік тому +1

    Love these videos 👍👍

  • @andysandrex7244
    @andysandrex7244 Рік тому +1

    Great. Looking forward to this. The rear wheel disc bolts look odd (7:17ish).

    • @obsession_engineering
      @obsession_engineering  Рік тому

      They're triggers for the speed sensor, so probably different to give a complete magnetic signature

  • @Underbreath
    @Underbreath 8 днів тому

    Made me laugh when you said there some paint left on the engine cases lol

  • @lukesavage1801
    @lukesavage1801 Рік тому +1

    Great video 👍

  • @nickrider5220
    @nickrider5220 Рік тому +1

    Thanks Dave, a great watch 👍 as in an enthralling video, not a fantastic timepiece ! You might have a fantastic timepiece, but you know what I mean..........

  • @ianhoyle8459
    @ianhoyle8459 Рік тому

    Nice machine Dave, I like the front upper fairing design of these, which has matured well.
    I like your ZX636 the most though.
    A bit of wear and tear on the bike I also like, like a well used Jet Fighter.

  • @chrisenright7003
    @chrisenright7003 Рік тому +1

    Hopefully the fresh paint will match the bits you didn't send away. Red can be finicky.

  • @kevinfletcher7471
    @kevinfletcher7471 Рік тому +1

    Actually a great bike to ride on the road

  • @stevesanelli90
    @stevesanelli90 Рік тому +3

    Bloody cool! I had a mono posto 749S! Will you paint the frame to match the black box swingarm??? Best colours! Watching your progress for sure!

  • @philipbennett1367
    @philipbennett1367 Рік тому +1

    Hi Dave, is the reason we don't see 👀 you working on the bikes because it's actually Adam who's wielding the spanners.😁😆😉😎

  • @thediddly
    @thediddly Рік тому +1

    A piece of advice, have a stud remover handy to remove the key/steering lock. This will help when it comes time to remove and install the airbox. You will appreciate once you find this out, trust me, there is no space to both rotate and slip the airbox in the same motion. V
    Best of luck, I'm almost done with my 999, and 749s tack bike is next

    • @obsession_engineering
      @obsession_engineering  Рік тому +1

      Ah yes, it isn't the best bit of engineering I've seen

    • @thediddly
      @thediddly Рік тому

      @@obsession_engineering agreed, along with the alternative fuel cap, other than that they are one of the last great analogue bikes, simple enough with the best chassis of that generation, with adjustable footrest mounts, pedals, and steering angle. Enjoy and I'll be doing the same watching your progress🍿📽😛

  • @grahamsmith8122
    @grahamsmith8122 Рік тому

    11,200 miles? that rad looked suspiciously higher in mileage?. Not sure if the dash/ECU has been reset as they are prone to wiping off the mileage if its not kept charged. Bloody good bike though and seriously undervalued in my opinion.

    • @obsession_engineering
      @obsession_engineering  Рік тому

      Mileage is backed up by lots of documents. It's definitely seen some weather though!

  • @pmcg7823
    @pmcg7823 Рік тому +1

    Coincidentally i have also been looking to buy a 748 or 749 and yours is on my watch list and I hadn't noticed the seller. I think the asking is fair considering it comes fully serviced and sorted. Tempting. Is 15 bikes too many? Reminds me of the old question, how many bikes does a man need? Answerr n+1 , where n is the number currently owned. Be right back need to check the sofa for coins ......

    • @mikeducat8729
      @mikeducat8729 9 місяців тому

      ua-cam.com/video/OS5q7riOk8Y/v-deo.html&pp=gAQBiAQB

  • @JollyGiant0
    @JollyGiant0 Рік тому

    Now only if you knew someone that could have made some nice carbon exhaust heat shield and heel plates🤔🤔🤦‍♂️

  • @chrisburkinshaw1819
    @chrisburkinshaw1819 Рік тому +1

    Looking at this it looks like it’s done more than 11000 miles, front sprocket in 11k they don’t have enough power for that

    • @TheOriginalCoda
      @TheOriginalCoda Рік тому +2

      There are other reasons the front sprocket could be worn.

    • @obsession_engineering
      @obsession_engineering  Рік тому +1

      Mileage is backed up by much paperwork, but it hasn't always been loved up!

    • @chrisburkinshaw1819
      @chrisburkinshaw1819 Рік тому

      @@TheOriginalCoda which are ?

    • @TheOriginalCoda
      @TheOriginalCoda Рік тому

      @@chrisburkinshaw1819 Knackered chain, rear wheel alignment on bikes with double-sided swingarms, insufficient lubrication, etc.

  • @dalelyons4366
    @dalelyons4366 10 місяців тому +1

    Not as cheap as what I sold my 916 for .. 😩

  • @Ducatirati
    @Ducatirati Рік тому +1

    Hey , I got a 99 , 996 , easy an 8/10 , easy , 20,000ks , come meet. a koala and even a Goanna , if yah rock on down to Australia , and spend the whole Day wondering why i asked you over , ffk i wish i knew what you know , I might need a battery, Ducatirati RARARA

  • @Vforfreedom
    @Vforfreedom Рік тому +2

    The very 1st thing this bike needs is new fuel pump and filter, oil change, new timing belts and new spark plugs

    • @obsession_engineering
      @obsession_engineering  Рік тому

      They are on the list!

    • @anthonygibbo1881
      @anthonygibbo1881 Рік тому

      Dave Hewson Road Racing Obsession Engineering LTD are you really going to sell it I mean just look at it would u just look at it 🤣🤣 nah joking aside it's a beauty and the 1st 749 I have seen with this fairing was this fairing standard or retro fitted per say ?

  • @Vforfreedom
    @Vforfreedom Рік тому +2

    No mate! Youre wrong. Ducati never did that. The previous owner most likely bought a used black box swingarm from a 2006 749/999 and swapped his ugly cheap grey swingarm out.

    • @obsession_engineering
      @obsession_engineering  Рік тому +1

      Would have needed to change the bodywork too.
      And my local Ducati specialist seemed to agree it wasn't unusual

  • @mayhemmayo
    @mayhemmayo Рік тому