Minibike BUILD Ep.4 - Rear Wheel Split Hub
Вставка
- Опубліковано 3 жов 2024
- Fat tire minibike build from scratch. In this video: fabricating rear wheel split hub and other stuff. Check it out!
My other videos:
/ @donndiy
My Patreon page:
/ donndiy
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter - Авто та транспорт
My other videos: www.youtube.com/@DonnDIY/videos
Support me on: www.patreon.com/DonnDIY
Follow me on: facebook.com/D0nnDIY
Follow me on: instagram.com/DonnDIY
Hybrid Prototype Leaning Quad Motorcycle AWD tipbandit
I do like your approach to problem solving. That hose attached to the caliper with a shraeder valve was brilliant simplicity. With that gear reduction, the bike will climb up a wall at idle.😊.
You know, if humanity had Donn DIY in charge of mechanical engineering schools, we could have interstellar colonies in about 10 years. Instead we have electric cars being followed around with petrol vehicles with generators.
I was just dropping down here to comment the same thing, about the caliper! I'd never have thought of that!
Donn
I love the way you think your way through a problem, your mindset to overcome, love ya brother
I really like this build, thanks from Maryland,USA 0450 hours
This increasingly looks like its going to loads of fun on any terrain and in all weathers, nice work as usual sir 👍
I have an old Sheldon lathe. Didn’t think I would use it a lot when I got it. But man do I use it all the time! Such a handy tool to have!
Some day your kids are going to appreciate all the cool stuff you made.
When they're not begging him to build their next cool toy...
😄😁😆😅😂🤣
Thanks for sharing with us Donn. Great fabrication project you are building. Always something interesting and showing lots of good techniques you are sharing too. Stay safe and keep up the great videos and fun you have around there. Fred.
Интересный такой проект, очень хочется увидеть в действии этого монстра на широких колёсах. Спасибо за творчество и за работу. Всего вам самого хорошего.
Hi 👋 donn?!! I'm impressed how you solved any problem. And make it that way easier your work. Nice 👌
DonnDIY is talent! Great project! 🔩🔧🎅🏻👍🏻🇫🇮
Kiitos!
The mini bike is looking
Pretty-ty good. 👍🏻👍🏻👍🏻
That split hub is fantastic and seems indestructible.
Looking good Donn!
A true artist. We are very lucky to have this content, thanks Donn!
Re: that sprocket ratio .. are you planning to tow log trailers with this thing or what? 🤣
Looking amazing, friend, thank you so very much for continuing to share your genius with us.
The rear sprocket seems big but according to calculations it could be too small since the tires are 22" in diameter. But we'll see, hoping to testride this minibike soon.👍
@@DonnDIY Cant wait to see it, keep up the good work!
DonnDIY.....
The Tech that makes the metal comply...
Great job Donn 👍 I can't wait to ride it! 😂
This is awesome can’t wait to see her ripping around. Great job you are a true craftsman
It is so much fun watching you build! This thing is super beefy and stout! It reminds me of how over-build old Honda 3wheelers were made! I can't wait to see more! Hope all is well Donn!
Fine work as always👍
It's time to make a 20-episode series about the lathe cleanup :)
Hello Donn good job
Brilliant, thanks for sharing
…you really are very good at what you are doing, creating
and ‘figuring’
you exhibit exceptional skills
a ‘never say die’ temperament
its truly a real joie to watch closely what you are working out and engineering to perfection
EXCELLENT ‼️
thank you kindly
👊🔥
🪖
Now that's a Beast!! Good work Donn!
This is really really some nice work. Your fabrication skills are getting better and better every day! Interesting solutions to tough problems and the execution seems to be getting easier every day for u. Well done!
Whoa!! The piece coming loose from the lathe even made me take cover! Don't kill yourself before you get to BRAAAPPP BRAPP on your bike! 👍
Thank you for the concern!🙏😬😛
The weld seam looks nice,Fronius ✌️forever;)
... -ones- -my- ... our best YT channel ...
😀🙏
@@DonnDIY Hybrid Prototype Leaning Quad Motorcycle AWD tipbandit
@@DonnDIYr camera
I asked you a question to which you did not answer, why...?! Do you despise your followers to this extent?!
Looking great! Keep up the great work! Thanks for sharing! 👍👌
Thanks for watching!
Thats going to be fun to ride! Mad skills man!
Cheers! Let's hope it works as intended.👍
There she goes again, pulsing through my veins. And I just can't contain this feeling that remains
Привет. Сделай буксаторы для шин сразу, чтоб стравливать давление в ляпёху👍
Love the work you are doing!! The videos are great 🎉🎉!! 👍 👍👍
Mini bike, maxi performance!
That was definitely an “oops” moment. I’ve played “helicopters” on a drill press quite a few times, but not so far on a lathe. Keep up the good work Donn.
All the best from Aus.
Pretty good.
Thank you for sharing.
Bling bling. Nice gold chain.
Of you have a lathe you don't have problems just solutions
Muito bom , sempre com construindo peças com qualidade melhor que as indústrias
donn i think this is my favorite one of your builds. looks great and that frame is killer. is that your own design? love the fat tires to. good job.
Yep, that's my own design from the ground up.👍
I almost want to see what kind of bike he could build with some 31x15.50-15 or 33x15.50-15 tires
Love it so much keep it up as always 💘
Waw keren bagus sekali👍👍👍👍
Nice job👍
Maybe you could use some shorter tools for turning to avoid the vibrations.
Yep. But I just used what I had👍
Ain‘t no sponsor who wants to support?🤔
Awesome!
It's a pretty big lathe for jewelers' size work, but okay....
And for our next project, a swarf baler!
Awesome 😎👍
good job 👍
Красавчик
The biggest problem I can see with this design is the tire sidewall flex and seat padding will be the ONLY shock absorption you'll get when you hit a bump...
This bike, while looking like it'll be fun to ride, will ride VERY rough...
You almost had summer teeth!
Yes.😬🤣
Hi Donn, nice progress.
Q: How will you make the chain tensioning work? Will the engine be able to move forward a bit?
Cheers 👍💪✌
The engine slides back&forth 👍
@@DonnDIY perfect solution, it will be a good fit that way. Nice!
wow deja vu from my fat bike build, i wonder if you took inspiration from it? :)
This minibike looks same like motorcycle for Bud Spencer from movie OTHERWISE WE'LL GET MAD! :-)
5:55 я аж пригнулся , было страшно .😮😁😁😁
Вподобайка.
I've gotten bit by the jaws on my lathe plenty of times and I'm sure I will get bitten again. Your lathe looks like it would gladly take an arm if you give it half a chance. I'm not trying to be Mr. Safety. That's just my way of saying I love your machine.
No doubt - one has to respect his lathe and be careful around it.👍
Part flinging is not allowed. I bet you don’t do that again. 😉
Question: Have you seen a ROKON trail breaker bike?
From the website pictures, you can’t tell how the front wheel works.
If it's the 2WD bike then I've seen it yes. At some point I was really into 2WD motorcycles. Maybe one day I'll be into them again.
6:00 there she goes again🎵🎵
Приветствую!!!
Поменяйте стоковую выхлопную систему, так как на родных патрубках очень малая пропускная способность и двигатель "душится"(((
How did you figure out this was the right sprocket ratio?
I guess some formula involving motor's RPM and wheel radius or something like that.
👏👏👏👍
Hybrid Prototype Leaning Quad Motorcycle AWD tipbandit
so it's a wheelie machine with that rear sprocket :D?
Fingers crossed!🤞🤞🤞😀
"There she goooes, there she goes again" hahhaha, stay safe.
😛
There she goes...😂
Are you planing to use bushings inside the hub? to avoid force on the berings when tightening the rearaxel?
Yep, of course.👍 I just mocked it up so I could see whether the brake rotor and sprocked flanges were ok. Now I can finish it up by making the spacers.
Why not use the sprocket as a brake disc?
I considered this but was afraid that brake pads would get contaminated from the chain lube that's stuck to the sprocket.
Quite possible but I would have thought that centrifugal force would keep it clean
Or go for belt drive
👍👍👍
Здравствуйте.
Подскажите, а цепь привода, не слишком близко расположена к резине ведущего колеса?
👏👏👏
👍👍👍!!!
mantap hadir supotr lur❤
ta ficado top
buen trabajo amigo ,aunque la TORNILLERIA NO TE LUCES
😎
I Built an INSANE Electric Mini Moto (+60mph!) Sur Ronster
-ü-
("ea$y").
👍
Is it a swamp bike, can it float? 🐊
Yeah, it'll probably float, but upside down 😅
It is a very bad idea to use a power tool to open or close your lathe chuck...
If any debris/swarf/chips etc. get into the scroll (through the channels the jaws slide in for example), you might not feel the resistance through the tool in time to turn it off before it jams and damages the scroll and/or jaws...
🤟🤠
Hyvä noin. Ei tarvita mitään etujarruja tms. Joku moottorisahateline vain ja vanhan traktorin jousitettu penkki
Tai vanhan ruohonleikkurin
Treiterad on nürid.
W/O any suspension?
Yes. The balloon tires are the suspension.👍
@@DonnDIY OK, I thought this exactly. Good weekend to you & your family!
Isn't your engine going to spin the wrong direction?
Good question👍but no. The engine crankshaft rotation is counter-clockwise.👍
👍👍👍
Love the build. I feel the brake caliper is overly exposed though.
It is a bit on the exposed side but also freely accessible, making maintenance easier.🤷♂️ Mounting the caliper to the frame is also much easier.👍