High pressure non-electric water pump - New design with three waste valves
Вставка
- Опубліковано 23 лис 2023
- High Pressure Non-electric water pump, New design with three waste valves
In this video I design a high pressure non-electric water pump which is usually called a hydraulic ram pump. With the latest design
The material I use is made from PVC pipe which is designed with three valves so that this pump produces maximum pressure than before
Hopefully what I have done will benefit many people, especially in hilly areas where water is scarce, because this type of pump can last hundreds of years if the material used is made of iron.
Thank you for your input and suggestions
Hope it is useful
Music:
Drums of the Deep by Kevin MacLeod is licensed under the Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ - Навчання та стиль
Warning!
A hydraulic ram pump is a water pump that has high pressure and can explode at any time.
Be careful when the pump is working, do not let your body rest on the tube
Thank you for your participation
Hope it is useful
______________________________________________
Peringatan!
Pompa Hidram merupakan pompa air yang bertekanan tinggi dan sewaktu-waktu dapat meledak,
Berhati-hatilah saat pompa bekerja, jangan biarkan tubuh Anda bertumpu pada Tabung
Terima kasih atas partisipasinya
semoga bermanfaat
You my dear friend are a very intelligent human being.
I'm an engineer and fully understand your process,methods and fluid dynamics obviously as you do too.
Your video presentation is outstanding and the way in which you apply multiples in process is admirable because it is correct 👍
*As a note to you*
If you are not already educating the younger generations,please do so ,and the "above header precautionary notice you've stipulated is very important also- yes it can explode and be dangerous 👍
Thankyou for your wonderful efforts in presenting this on this platform and other platforms aswell if you've not done already!
This is exactly why UA-cam was created.
It's YOU and who what you are without contrived nonsense!
You have a very good knowledge of fluid dynamics and mechanical principles that are your asset that is quite valuable to future generations and in saying so myself , please continue to inspire the future generations for they need you and people like you and I to show them in practice what is doable even when there is little at hand to achieve great feats.
Thankyou for posting a time piece of your talent ❤️👍
Subscribed 👍💪
sxq CTRL1qq
😊
Ariete, más antigüo que yo.
This young man is what I call a PVC mechanic. VERY well done. Only correction I can say is to use cleaner on the pipe for better glue penetration… can budget the money by applying the glue to the female side of the fittings half way into each. Will save glue and make a neater and stronger connection. 👍GREAT job. Absolutely love your ability to make your own relief valves ! Adjustable at that . Amazing work ! Un-Paralleled work ethic’s 👍
I have added screw fittings to mine as they need to be clean from time to time,
Bí
pvchanic
Moi , j'adore ton humour
.
Превосходный урок мастерства и изобретательности! А главное - на такой красивой природе нет лишнего шума и дыма от бензинового насоса.
Да уж! Вот только водозабор у него из каких-то грязных водоёмов, а выход - кристально чистой воды.
@@user-bq7qq3mf7p ну он же фильтр грубой очистки поставил ))
Это действительно рабочая схема но там для ее работы много условностей нужно соблюсти
Вот интересно возможно ли построить каскадную сеть гидротаранов, что б сбрасываемая вода верхним насосом скапливалась в нижнем бьефе, а далее аналогичный гидротаран и такими каскадами поднимать воду???
Однако,физику не обманешь!😂
Sungguh anak muda yabg kreatif 👍👍 kamu layak dapat penghargaan
As a resident of the US, we have been spoiled and expect individuals to design what we need instead of thinking outside the box, as this person is doing. Thank you for posting this and God bless you!
đây là Việt Nam
@@bonbon-sr3lqindonesia
As an American who Sees other Americans building self made equipment all the time, sounds like you might be from LA or some other dystopian Giant city in the US.
Indonesian. West Java.
An old West Virginia friend who had been into coal mining told me about the ram hydraulic pump years ago though I found nothing about it here on the internet in the United States. It's amazing to see it. Once it started Ram Jack came to mind.
A company called Walton makes them in France. They ain't cheap though!
got one running here for 2 years now in Pennsylvania. Found the video on YT
@@nchestercountynews4955, Hi, what is YT? I would like to buy a Ram hydraulic pump.
@@SteveRoman-ls2fp UA-cam
Thank you
Keren...., solotip utk daerah sumber air yang melimpah.... Trims min berbaginya, Pekalongan nyimak
I really love it. God bless you abundantly!
The Hydraulic Aries! 👍👍👍 An eternally old invention. About the end of 1800 years. Conveying efficiency about 70%, 30% water 💦 run away, can do without electricity!!! Seals must be changed every six months. As I said, without electricity!!! 👍👍👍
Dr
This unique implementation of the hydro-ram pump design appears to be performing rather well with a useful volume of water. Using simple materials and tools shows ingenuity and resourcefulness. Well done!.
That PVC glue is amazing, must be a kind of glue which NASA approved for plumbing on apollo spacecraft
🤣🤣😂
By now this guy has probably thought a hundred ways he could have made it better, and improved it. .. he has more imagination and ability than most engineers I meet just graduating from university. Give him two years at ANYYYYY job and he will be a specialist at it. Intelligence is intelligence, and can be used at ANYTHING.
Not true, my boss was a Prof. Dr. Dr., but not able to open the dish washer.
@@ws4860
What!!
That is what I said, can you read??
I said THIS GUY not professors or PhD's.
Kamu luarbiasa It's great that it no longer consumes electricity, it can be used as long as possible, nothing will burn because the engine is hot all the time
Your very smart and your video was really good. One thing you should've done before you started putting the pipe pieces into the fittings was to put a chamfer around the outside of the pipe so the pipes sharp edge won't scrape the glue as it's being pushed in. And as you were gluing all the pieces together you should've glued both the male pipe and the female socket ends that were going to be joined together and twist them about a quarter turn as you push them together. By not doing those two things it caused your pump to leak . And it's always good to debur the inside edge of your pipe too so nothing that might be in the water that gets through the screened fitting can get caught on the pipes edges and build up over time and get clogged up. I think if you would've done all that your pump would've held the preasure and not leaded . Another thing, if your going to build something that will have any kind of preasure build-up always make sure to let all glued joints go the full cure time. Some glue times can vary from 4 hours to 24 hours before putting pressure on your system and the companies that make the adhesive really advise you to not ignore the cure time before pressure is put on the system , I know you've put alot of time and money into your project . I really liked the way you made your own internal valve with the big pvc pipe you reformed flat and cut out and sanded your pieces round . You show alot of skill . Loved your video ! 🙂
Thank you for your advice sis
Purple primer
Geez what a sceptic!
Ww
@@chippydog2 What's your problem ? I gave him praise for his project and even went back and added to it. All I did is give some helpful advice so maybe his pvc pipes won't leak anymore. I don't know this but all those big pvc pipe and fittings aren't cheep ! And it sucks if something goes wrong with your project after you worked really hard on it ! Your probably one of those guy's that can't stand for someone to give you help or constructive criticism ! You probably look at that as a slap in the face instead of someone trying to help teach you a better way / easier way to do something ! But if you didn't come up with the idea yourself you considered it an insult and get mad ! Sound about right ? Why don't you go back and read what I wrote and think again what you wrote to me .
Luar biasa...ide sangat sangat berGUNA👍👍👍👍👍👍👍👍👍
menginspirasi banget, keren salut buat ide kreatifnya pvc....👍👍👍👍
Berraquera, 😮 esos panyiao no necesitan ser ingenieros paraa inventar lo que sea.
Good, good, good.
Excelent 👍👍👍👍👍👍👍👍👍👍
When you glue the pipes, first prime them both sides, then glue both sides. Push in while twisting into place. Nice job!
High pressure fittings, low pressure pipe, no primer. What could possibly go wrong? Lol.
Well done! Thank you. When I solvent-weld PVC or ABC pipe, I twist the pipe as I insert it to more evenly distribute the glue.
Making creative idea is unlimited..!
Make your own..you to believe..everthing sorround you has a purpose and value..I believe on His talent.
Clamp+drill+rusty nail=lathe, good job! You may want to lock down those piston nuts once you've got them properly adjusted.
máy.bơm này được nắp đặt cho một vùng cao của Việt nam thì tốt quá …cảm ơn bạn đã cung cấp T tin này .
Satu perkongsian yg baik dan bermanfaat 👍1like
Ingenious use of an electric drill + vice as a lathe; 10 out of 10!
Very interesting design, I see that the 3 valves could not only help in long-term operation but also with the pressure, however, I think it'd be smarter to make the 3 valves have their gates(or whatever you'd call the part that actually helps with the switching) physically connected to each other for synchronization (even tho it's able to sync by itself), or just use one single huge valve.
Also, I'm pretty sure the vibration will eventually make the nuts move out of place which will require manual tuning again, a simple fix for that would just be adding another nut or using something like Locktite ig.
tanpa ada kata,,,yang penting bukti nyata,,,kamu hebat lurrr,,,,
It's really interesting when I get to watch good videos like this. I really like this simple, peaceful life. I wish you good health and peace.
c'est relaxant.
Thank You. Enjoyed your skills and techniques. These pumps have been around for a long time but i always enjoy the way they are brought to life. In Jamaica they call these ram pumps Heart Beat Pumps because of the sound they Make. And are found in older Farms and plantations were there was no electric Power available.
Ini bener2 ahlinya ahli mekanik air. Hebat!!!
Pompa air non listrik sangat kreatif ide yang sangat cerdas dan bisa di contoh atau bisa di pergunakan disaat kita memerlukan sanga efektif dan episien
Karya Inovasi yang luar biasa pompa air non elektrik menjadi solusi dapat dipergunakan didaerah pedesaan yang belum masuk jaringan Listrik PLN
원리상 진짜 될수 있겠네요. 운동 에너지를 모아서 압력을 올리고 ㅎㅎㅎ 좋은 정보 감사합니다
The only genuine free energy machine, very well built.
Mantap Bang..Pompa tanpa listrik nya..Super Duper Keren👍👍👍👍👍👍
Kudos to this gentleman for his hard work and self achievement. Hard working Taiwanese brother.
Thank you
Salut atas idenya.Mohon berikan tutorialnya,juga bahan yg diperlukan serta ukuran bahannya.TERIMAKASIH.TUHAN BERKATI.Amien
Apakah ini beneran bisa ???
Beneran mas, yang palsu-palsu di channel saya GK ada
He's Indonesian, I think you will find.
Whenever using PVC pipe and couplings always glue both pieces even though it says cement, it is a welding chemical, that literally melts both pieces together , traditionally, not a glue.
And as we both know wet concrete does not stick to dry concrete.
Place a relief valve in the middle of the blue hose, and you will see that the pump will have strength, thus pumping even better. Congratulations on the good work. Brazil
"Relief valve " or you mean a check valve (one-way valve) ??
@@carlosmejia5728 Yes, that's right, with the valve retention it relieves the pressure on the pump, leaving it freer and stronger to hold the weight of the water that is rising and returning, so this valve relieves system fatigue.
Válvula antiretorno tambien se llama en Latinoamérica.
Menteur
Clever use of the laws of nature. :)
If you can build one in steel or have parts for a repair. The plastic parts may wear out in a couple of months.
в целом зачёт , только резьбовая шпилька сотрёт пластик через неделю и насос перестанет работать. Потребует замену, элементарно, ты это предусмотрел , но кто менять будет когда ты уедешь😅
Обратные клапана заводские надо было купить.😁 и вообще всё можно было сделать проще и надёжнее.😂
то, что мертво - умереть не может!
Как сломается то, что никогда не работало?
Как эта шляпа работает? Такое ощущение что закон сохранения энергии нарушен.
@@antonb.3398 гидроудар. вода под небольшим наклоном течёт в насос, набирает инерцию , и в этот момент клапан закрывается. Воде некуда деться, и вся накопленная кинетическая энергия переходит в потенциальную . Вода под давление идёт в верх. КПД не большой, основное количество воды теряется на разгоне, давление тоже сильно не поднимешь. Зато один из больших плюсов не нужен внешний источник энергии, насос компактный, надёжный.
@@MrMuha777 но не рабочий
that is really cool how the waste valves all react together so well.
I hadn't seen (or considered) a multiple [valve] ram before. It seems like a really good idea
Your water flow is much higher than other examples I've seen
@@ByronWatts 99% it´s fake... You need much stronger stream for way less water...
@@jduzivotem3985 Now that i think about it, sure one can put electric pump on the intake or just swapping it to output when he climbs up, pressurizing the system and turn it off an on again to create the pressure change, but faking it takes more effort in automation than building this and ram pumps do create considerably less flow compared to main stream but if you look the water reserve pipe, there is hefty amount coming to keep it empty. Fill the dam full and it probably could work least until dam is empty.
I would love to build one to test this but lack any flowing water most of the year, so there is no point in that regard.
@@jduzivotem3985 fake?? Hahaha.. learn more please
@@SankichupWell.. water pressure is divided over the pumps.. so each pump creates less pressure.. only reason I see for doing this is if you really want that effect. Say the valves can be less robust. Its plastic afterall.
That is why you twist the pipes while assembling them, it seals the joints by better mixing the two fittings.
Nao sou de ficar o video todo assistindo mas esse video vi por compelto voce esta de parabens adorei o video
WOW!!! I had NO IDEA this could be done!!! GREAT JOB!
It can't, he's full of shit.
actuall hydrolic rams have beed around and in use for centuries since the 1200's
He is highest talented water work engineer..👍👍👍
Thank You
he is only copycat from another channels 😊
Хорошо, когда у тебя лето круглый год.
Great job man, the only mistake you made was not to glue the tube and the fitting. You need always glue both of them before pushing them together. Nice video
and let the dry for 8 to 24 hours depending on the temp
Ini baru kreatif dan ber ilmu 😂
2:42 You must wear high heels and hand gloves. This cement is dangerous for your health. My brother, thank you for your effort. I wish you good luck and success in your life.
The glue when dry is totally inert.
Aqui no Rio Grande do Sul se chama essa bomba de carneiro hidráulico. Tem pronto pra vender nas casas de agropecuária. Mas sempre com uma válvula de saída. Essa com três válvulas é a primeira vez que vejo. Muito bom! Parabéns pela ideia.
Abraço pra gauchada daqui de Santa Catarina... Sul sempre...
é só colocar 3 juntas
Excellent work!👍👍 Have been an agricultural engineer for many decades now. Have always wanted to build one of these just for fun. But I live in Canada and water pipes have to be buried 8’ in the ground to prevent freezing up. Not to mention the rivers freezing up. I would use different construction techniques but your ingenuity deserves much praise. 🍻Cheers!
im sure there'd be a way to design it such that the entry point freezes over before anything downstream of it... allowing the downstream pipework to discharge before any water freezes inside? might let you bury the pipework only a little below ground?
just a thought...
pěkný ,,trkač " dobrá práce, volil bych svařované spoje, ale dobrý.👍
Espetacular. Show de bola. Parabéns.
Nada mais é do que um "CARNEIRO HIDRÁULICO". Ele simplesmente reinventou a roda!!!
Muito bom, boa ideia.
Sounds like a great solvent / primer mix. 😊
Oke salam
Kenal dari palembang 🙏🏾🙏🏾
👍👍👍. Прекрасная модель для самотечного насоса на один сезон полива! Плюсы в том что дёшево и сердито😂😂😂. Когда в ДГМСИ учился на таком стенде нам гидроудара в трубах демонстрировали. Но может лучше было сделать на резьбовом или фланцевом соединении для удобства обслуживания?
Ну и так, чтобы клеевые соединения не текли, надо предварительно наждачной бумагой проходиться )
Как работает гидроударом, понятно. Но бассейн с водой выше того места, куда выливается вода со шланга. Не проще было просто водопровод туда провезти с бассейна?
Че за гидроудара?
@@user-cy2qc6km8v 17:33 там перепад высот между запрудой и концом шланга метров 5 не меньше, и запруда НИЖЕ конца шланга
@@user-mx6hu9yv6l 10,3 метра, согласно манометру и давлению водяного столба
Maravilha belíssimo trabalho boa ideia gostei muito legal vou montar uma pra o meu sistema, valeu você e polivalente de verdade felicidades boa ideia 💡...
Inovasi yang cerdas....kereen abis. Kalau yang lain katupnya vertikal, yang ini horizontal.
Yang saya tunggu dari awal sampek akhir malah cerita ngaconya mang jon😂
I learnt something really cool today. Many thanks.
Very good project. Can help many peoples with water problems,especially to get the waters pumped up to higher levels. And no electricity used. Impressive! Great bro! Hope to see 👀 soon more people ,applying this system.👍🏿❤️
Deveriam contratar você, perfeito sua engenharia parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Great job, this guy is very hard working , he's bricklayer, plamper and inventor in one, well done bro.
Está bem feito, mas ele não inventou nada. Existe á séculos
Great job. Great presentation thank you
Very good. Simple yet complex 👍
The valve assembly with the slotted pipe in a pipe is excellent.
I've never had a pvc glue with that long of an open time. The glue here hardens in 6 or 8 months so I just buy this blue lava stuff that is always on clearance. It is about as fast as they get. Not sure any of it is open that long. I've used near all of the different kinds and the most longest not more than 30 seconds. Might need polyurethane glue to have enough time to assemble it.
keo của Việt Nam đó bro
Nice triple ball RAM pump. That's a lot of pleasure clearly the way it blew out the seals. Lots of air pleasure in that upper tube, I've not seen one with the tube horizontal yet.
In Vietnam farmers are using this method because the farmers didn't have enough money 💰 to buy water pump systems it's proven and you all can try it it will work without any electrical stuff or fuel. I am not from there, but i visited Vitamin and the folks down there work hard to rise thier families tree.
not sure splitting the flow in three is a good idea. One big valve might better to preserve the pressure?
In Brazil this is called "Ram Pump" and is widely used on farms. (No Brasil isto é chamada de "Carneiro Hidráulico" e é muito utilizada em fazendas)
Xasds❤
Um abraço a esse gênio. O chefe da nação de cada país é pra valorizar esses talentos.
Terbaik. Sangat sangat menakjubkan pandai sekali dia 👍👍👍👍
I would like to see a more detailed video on what parts were used to build this ram pump.
check valves and and an expansion chamber. you can raise 7' water column for every foot of input (fall) from the source, Filling my IBC totes for the garden from my pond
Great video! You are in incredible inspiration in your passion to helping your family and community in a sustainable way with dogged determination.
Вообще молодцы по ходу вам это надо.
Ini ide yg yg sangat menarik dan video anda juga sgt jelas
Magnífico trabajo. Felicitaciones!
Nice ram pump excellent work
Now you can plant at the top of hill an let gravity do the rest👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Of course guys
Esto es realmente espectacular!!!
The ram jet pump is a great idea. However, my only complaint is the exhaust / waste water that is discharged. If there is some way of capturing that water, I can see a great future for solving some of the world's problems!
You can capture and use it at that level or below but the waste water is used to power the pump so it can't be pumped up, there will always be some wasted to perform the work but it can still be used for things below the waste valve. If you have a plentiful water source the waste is not important, nature takes care of it.
The "world" doesn't have a water problem. Governments and individuals do. It's called greed, lies, extortion, and resource hording.
Chỉ còn cách làm bánh xe nước
Salut, semoga makin berkembang tekniknya dan jd solusi bagi kebutuhan masyarakat. Alam harus dimanfaat dgn benar, termasuk cahaya matahari yg melimpah (menjadi solar stove, tenaga listrik, dll).
😊
Parabéns pela sua criatividade. 👍
Great piece of innovation. Give him a workshop and he will be racing Space X. Education is about learning not about being taught. However if he had a larger feed pipe he might have got dangerous pressure so stand clear when turning on. Amazing using basic tools. I want him in my team when disaster hits the world.
Je ne connaissais pas le principe de cette pompe à eau. Elle offre une solution intéressante quand il n'y a pas d'électricité disponible. En plus cela tombe moins en panne. Bravo pour cette vidéo.
C’est fake mon amie,il n’y a pas et il ne aura jamais de l’énergie gratuites
Il doit avoir un pompe électrique quelque part et i chercher à effacer les trace avec le taux de tuyaux
C est une pompe bélier.
@@Diabolos-RIPTechnoblade- это не свободная энергия. чтоб поднять 1 литр воды наверх, расходуется 7 литров воды на землю
Ótimo trabalho 😅
Ничего не понятно, но очень интересно )))
Kereeen bang, kirain channel luar ternyata channel Indonesia. Saluttt
Кулибин!! Ай, да МОЛОДЕЦ!
Das nennt man "Hydraulischer Widder" Diese Pumpe wurde 1796 vom Franzosen Joseph Michel Montgolfier entwickelt. Ist doch super das so alte Erfindungen noch heute Vielerorts sich täglich bewähren. 👍
Good job n idea, saya ingin punya yg begituan
Mantab ide kreaktif sngt berguna cocok untuk daerah yg blm terjangkau PLN ❤
very practical, and helps areas far from water sources, but at a minimal cost
Very impressive 👏 Well done 👍✅ Good job ❤
Muito bem elaborado. Seria uma ótima solução na minha propriedade, não sei se temos no nosso mercado todo esses modelo de conexões utilizado no projeto.
Tem sim amigo, em lojas de materiais se encontra todas as conexões de todos os tamanhos e tipos
você compra montado chama "bomba de carneiro hidráulico."
Good job you are genius ❤
بارك الله فيك وفي عملك
Nice project sir I'm very interested good job bro😊
Интересная идея!лайк!👍у вас неприменяются полипропиленовые трубы под пайку?
Скажем так если у него каким то образом потекли после склейки надежные трубы из ПВХ , то полипропилен он и спаять не сможет . Надежность соединения ПВХ получше чем полипропилен , да и требований к качеству работы меньше. А потекли потому что он не снял фаску , не отчистил трубы от грязи и если то не два в одном не прошел очистителем и не провернул вклеиваемые детали хоть чуть чуть при вклейке одну в другую.
BEST DESIGN YET... 👍👍THANK YOU...