a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Hello friend, I have a problem with my Polaris 450 quad bike when I get into the water, the water goes out and it turns off but the air filter is missing, which I have to change, can you give me an idea?
Polaris sportsman's must be greased regularly and don't forget the grease zerk on the 4wd shaft below the oil check plate door you removed in this video. Always use synthetic polaris oil if you ever expect polaris to warranty any motor problems.
I have a 14 400 now and I’m looking to upgrade to the 2021 450 and I’m just curious does yours make the clunking sound when your going over bumps,rocks
a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Nice video Just purchased my 450 about 2 months ago good machine so far getting close to a hundred miles you ever notice it jerks when you go into gear ⚙️ ? Hope to do a 100 mile review soon
Cutleg 66 Thanks! I never noticed it jerking when I put it into gear but it usually makes a little clunk when I put it into gear which I believe it is supposed to do that because it’s done it since the day I bought it.
The funny thing is that I wasn’t even in the mud when it broke. I was riding it in a field and hit a small bump when it broke surprisingly. And even if I was related to mud ridding I don’t think the factory tires would be capable of it because they don’t have real aggressive tread.
Gopro Brayton I have the same bike got mines in April. 2” left , 28” maxxis Mudzillas, harbor freight 2500 pound winch front a rear bumpers & a Dalton clutch kit for 28” tires or lager and 12” STI D-6 wheels. Still riding stock axles! I do have a set of east lakes front and rear axles here in the shop ready!
You need to get a grease gun and learn how to grease it. the problem grease fitting is on the drive shaft right side. I grease mind every time I go riding. Ebay has a battery relocate kit for sportsman, best $75.00 you'll spend.
a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Yes it was $5,500 out the door after sales tax and registration. The Honda’s are a lot more expensive but they probably are the best atv for reliability.
Good review I got 23 450 and I love it they fixed a lot of complaints from the previous models
look into Bison bumpers. They have some bulletproof brush guards one of a kind
a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Hello friend, I have a problem with my Polaris 450 quad bike when I get into the water, the water goes out and it turns off but the air filter is missing, which I have to change, can you give me an idea?
I put the HarborFreight on my 570 but if u get one get the 3500 I got the 2500 and regret not getting the bigger one
Polaris sportsman's must be greased regularly and don't forget the grease zerk on the 4wd shaft below the oil check plate door you removed in this video.
Always use synthetic polaris oil if you ever expect polaris to warranty any motor problems.
I'm in the process of trying to get a good deal on a Polaris 450 from a certain dealer here in Maine but they won't work with me on the price.
That ticking when u turn it off when I got mine I wondered why the hell it did now I no they all do
I think its from the heat leaving the motor , the metal expands and contracts
Best bang for your Buck. HO is high output so it's a 500cc. Cheesiest 509 on the market
Also you said “awd” as if you thought it’s the same as 4x4 … there different ,one thing Polaris is actually leading the atv gang with
Good review bro 👍
I have a 14 400 now and I’m looking to upgrade to the 2021 450 and I’m just curious does yours make the clunking sound when your going over bumps,rocks
I don’t think it does unless I just have never noticed it.
a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Nice video Just purchased my 450 about 2 months ago good machine so far getting close to a hundred miles you ever notice it jerks when you go into gear ⚙️ ? Hope to do a 100 mile review soon
Cutleg 66 Thanks! I never noticed it jerking when I put it into gear but it usually makes a little clunk when I put it into gear which I believe it is supposed to do that because it’s done it since the day I bought it.
Harbor freight badlands $89.00 2500 lb. approximately $40.00 adapter on eBay.
Are those tires the ones that actually came it?
If you play in mud your going to break axles! That’s just something you gotta get used to it and just some back ups
The funny thing is that I wasn’t even in the mud when it broke. I was riding it in a field and hit a small bump when it broke surprisingly. And even if I was related to mud ridding I don’t think the factory tires would be capable of it because they don’t have real aggressive tread.
Gopro Brayton I have the same bike got mines in April. 2” left , 28” maxxis Mudzillas, harbor freight 2500 pound winch front a rear bumpers & a Dalton clutch kit for 28” tires or lager and 12” STI D-6 wheels. Still riding stock axles! I do have a set of east lakes front and rear axles here in the shop ready!
Gopro Brayton check your IG I sent a few pictures
I have a 2500lbs harbor freight winch on my 07 sportsman 500 has been on it since the quad was new haven’t had any issues
Chandler Tack Thats good to hear. I think I will have to buy one now.
Can’t find any good prices for atvs in 2021. Everything selling for msrp even if you can find anything.
Is it hard to turn in 4x4
You need to get a grease gun and learn how to grease it. the problem grease fitting is on the drive shaft right side. I grease mind every time I go riding. Ebay has a battery relocate kit for sportsman, best $75.00 you'll spend.
How
Nice review, not a bad lower priced machine. You ever seen how fast it is on top end?
rzl07375 I think I have maxed it out around 55-57 mph
Here in Jersey the dealer wants 7,000 o.t.d highway robbery
How’d you get suck a good deal
It was during the spring sale at my dealership and I didn’t even talk them down on price that’s what they had it listed at.
Does yours make a clunking/knocking sound when you first crank it up?
I don’t think it does because I have never noticed it before.
take off the seat and it’s probly that long plastic piece from the air box that comes up to the fuel tank rattling on the plastic
a lot of guys in your comment sections are asking about clunks and rattles in your comment section.. some may be attributed to the snorkel of the air box, also the front motor mounts are really cheap and fail often, when doing a pre-ride check or post ride wash up, inspect these
Really 5k I got my Honda recon 250 for 5k
Yes it was $5,500 out the door after sales tax and registration. The Honda’s are a lot more expensive but they probably are the best atv for reliability.
That sucks
I wish they were still that cheap
My cam shaft broke on mine 250 miles
Did they cover it under warranty? What year was it?
Gopro Brayton yea they did it is a 2019