2020 Audi S3 Badge Swap: going from chrome to black

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • Car debadging is very popular here in southern California. What used to be called car debadging is now being commonly called a badge delete. But "deleting" the emblems from this Audi S3 doesn't stop there.
    Once you remove old car emblems you now have a clean canvass to work with which means more options if you are installing new emblems.
    What this translates to you as a car owner is options: if the original emblems were not aligned properly, you can remedy that problem. Or if you prefer the replacement emblems to be positioned differently than where the original car emblems were.
    Options!
    In this car emblem removal video, the Expert at Auto Fetish Detail doesn't stop with a traditional car emblem removal, but installs new car badges for a more "ominous" appearance to this 2020 Audi with black emblems to replace the chrome original emblems.
    If you live in the southern California area and want the expertise that can only be had from 30+ years of professional experience, then reach out to Auto Fetish Detail.
    Auto Fetish Detail: www.expert-mob...
    Are you out of our service area and looking to debadge your car or truck yourself, then use the links below to get the same products Darren uses professionally:
    3M Stripe Off Wheel: amzn.to/2OPoXld
    Rapid Remover Adhesive Remover: amzn.to/30YlYcD
    Ceram-X Car Polish: amzn.to/2QdL8lk
    40 lb. Test Fishing Line: amzn.to/3c4uMnQ
    Shop Darren's Favorites on Amazon: www.amazon.com...
    #carbadgeremoval #caremblemdelete #audicaremblemremoval

КОМЕНТАРІ • 39

  • @anthonyjohnson9580
    @anthonyjohnson9580 3 роки тому +6

    The Forefather who laid down the foundation in the auto detailing world! You will forever be the best at what u do, Darren! Great job as usual!👍👍👍

  • @ReggieNoble637
    @ReggieNoble637 3 роки тому +7

    No short cuts, just clean work.

  • @gokayification
    @gokayification 4 місяці тому

    It is the best job I have ever watched.

  • @jackshittle
    @jackshittle 2 роки тому +2

    I wish I could have this done to my A4. However, I don't know shit about using any tools (nor have any) and would never trust myself to do it. I'd have to find a shop around here that could do this for me.

  • @keithp115
    @keithp115 3 роки тому +2

    Great job brother!!

  • @GoofylookinHippy
    @GoofylookinHippy 5 місяців тому

    Wow! Super helpful. Might have to go to town on m S5!!

  • @rudyhinojosa9874
    @rudyhinojosa9874 2 місяці тому +1

    What is that wheel called that you used to take off the emblem adhesive

  • @user-gu3cg4pw7x
    @user-gu3cg4pw7x Рік тому +1

    Hi there, I just bought a 2018 S3 and am looking on doing this the right way. I previously owned a 2009 A4 and did it the not-so-good way by spray plasti-dipping the badges. Im going to buy that 3M eraser tool, but would you care to tell me the other attachment you used to buff(?) after erasing the residue? I wanna make sure I do it all right without ruining my paint. Thanks in advance

  • @Matniclor
    @Matniclor 5 місяців тому +1

    Hi, what disc did you use to remove the glue?

  • @TruthBombTom
    @TruthBombTom Рік тому +1

    What is the use of the masking tape?
    Confused me as ai thought you'd keep it in place so you know where your new badges need to go?

    • @DeRock401
      @DeRock401 6 місяців тому

      It’s so they don’t scratch the paint

  • @dylangiovannucci4190
    @dylangiovannucci4190 3 роки тому +4

    What kind of pad is that to get off the adhesive? Looks like plastic lol

    • @ReggieNoble637
      @ReggieNoble637 3 роки тому

      3M Stripe Off Wheel aka Adhesive Remover Eraser Wheel.

  • @MA-bq8yg
    @MA-bq8yg 2 роки тому

    Great job man

  • @justineliason
    @justineliason 7 місяців тому +1

    If you don’t mind me asking where did you get that emblem

    • @starrriaa
      @starrriaa 5 місяців тому

      hi i bought mine from the audi website

  • @xxsekoxx
    @xxsekoxx Рік тому

    Just bought an S3 and looks like someone before me put on mirror caps and rear spoiler. Well they did a bad job and both are coming off. What should i use to get them to stick back down?

  • @calvincheung4587
    @calvincheung4587 Рік тому

    very clean

  • @RealKevGotEm
    @RealKevGotEm 11 місяців тому

    I can’t get my Mazda logo off no matter how much heat I put

  • @sweetandsour6521
    @sweetandsour6521 8 місяців тому

    woahhh what did you have on the end of your drill i need that it was so fast

    • @BenSmith-xc4fn
      @BenSmith-xc4fn 6 місяців тому

      Think it’s called a toffee wheel

  • @022rty
    @022rty 2 роки тому

    Looks good. Too bad there was no explanation.

  • @BM77736
    @BM77736 6 місяців тому

    What's the attachment called for the drill ?

  • @brockdicesare3422
    @brockdicesare3422 Рік тому

    Where do you purchase the black replacement badges?

    • @rogerl9997
      @rogerl9997 7 місяців тому

      I got mine from the dealer. I waited for them to be on sale

  • @dylanbailey6153
    @dylanbailey6153 Рік тому

    Where did you purchase this?

  • @georgepeasgood4936
    @georgepeasgood4936 2 роки тому +1

    What wire do you use ?

  • @richardseem7948
    @richardseem7948 3 роки тому +1

    Awesome video and tutorial good friend. Best untold secret. Easiest cash u will ever make.b well good friend

  • @1stfrompuertorico568
    @1stfrompuertorico568 3 роки тому +1

    3rd party people
    And no plastidipping the badges 👌👍😄

  • @mooserecords8454
    @mooserecords8454 2 роки тому +1

    let me save u geys some time when u take the logo out dont remove the white stuff, instead put the new logo on it

    • @Americafirst-i8q
      @Americafirst-i8q Рік тому +9

      That is simply not true if you leave the old residue behind the new emblem will not stick properly to the surface besides it's better to start fresh and do it the way he did it

    • @BeepBope
      @BeepBope Рік тому

      @@Americafirst-i8qwhat would you use to stick it back on?

    • @Snowcappy
      @Snowcappy Рік тому +3

      let me save u geys some time when u take the logo out REMOVE the white stuff, then put the new logo on it