Another happy customer from Australia. Been using this about a month now mainly with GT Sport and getting nice consistent braking. 20kg mod works well on T3PA-GT pedals using bare foot or socks. Don't mind the short travel, it's more about the feel/pressure.
@@attha2 just received it and can confirm that it doesn't travel at all haha only travel it has is from the compression of the rubber stopper. Will definitely need some time to get used to
@@attha2 a follow up tho is that it makes complete sense, the creator understood that if there was dead space between the stopper and the pedal, it's essentially useless as there won't be pressure registering with the load cell. Hope that clears things up
I want to buy this, I'm not sure if I should get the 20Kg or the 10Kg. Do you have any recommendations? I primarily play Dirt Rally, Project Cars 2, and Assetto Corsa.
The 20kg loadcell needs 20kg (44 lbs) of pedal pressure to reach maximum brake force. The 10kg version only needs 10kg (22 lbs), which is about the same pressure as needed for the conical rubber mod. If your pedals are hard mounted (and they should!), choose the 20kg. Otherwise, choose the 10kg.
@@loadcellmod5338 what if the pedals are hard mounted on a rig (gt omega) but the chair is not? To be honest when i have to push the conical brake hard sometimes the chair slides back. Does this mean that i am better with the 10kg load cell?. If i use the 10kg cell does this mean that the amount of controll decrease?
@@Alextraz If your chair slides back when using the conical, then it will certainly slide back when using the 20kg loadcellmod. You can try the 10kg loadcellmod instead. The 10kg offers the same amount of control, the only difference is the required force to reach max brake input.
10kg is very very light. I used a set of scales up against a wall to get a feel for how hard I press the brake today with my conical brake mod. It is much closer to 20kg than 10kg so I have gone with the 20kg model.
Hi, my pedals are attached to a wheel stand pro. I have two questions: 1) Should I use the 20 kg or the 10 kg mod? 2) In principle I can attach it also to the clutch pedal right (I use clutch for braking)?
You can use the 20kg. It's not possible to use the clutch since you need the bracket for the conical rubber to mount the loadcellmod. This bracket is located behind the brake pedal.
I bought this "product", and it does not work well... when i play iRacing i got issues, it works for 20 minutes and then, it works no more, i have to unplug and replug it...very useful when go for a race...and there is almost no pedal travel...no comment. People, DO NOT BUY THIS PRODUCT, SAVE YOUR MONEY AND YOUR TIME.
Wow, Bagar, I understand your frustration, but maybe you could contact us directly instead of screaming it out on the socials? We're more than happy to find a solution.
![Are you making these MISTAKES when braking [Sim Racing]](http://i.ytimg.com/vi/fonXd097vks/mqdefault.jpg)
The first day I instantly saw consistency in my braking, I never had that! ❤thank you
Another happy customer from Australia. Been using this about a month now mainly with GT Sport and getting nice consistent braking. 20kg mod works well on T3PA-GT pedals using bare foot or socks. Don't mind the short travel, it's more about the feel/pressure.
Just fitted this mod and find it works quite well and I’m happy with it. Service was prompt and got to Australia quite quickly.
Found this video just now and instantly bought from Canada, hope to try it out soon!
Just ordered from USA. Looking forward to using it on my T3PA setup.
how is it? it seems the brake does not travel a lot?
@@attha2 just received it and can confirm that it doesn't travel at all haha only travel it has is from the compression of the rubber stopper. Will definitely need some time to get used to
@@attha2 a follow up tho is that it makes complete sense, the creator understood that if there was dead space between the stopper and the pedal, it's essentially useless as there won't be pressure registering with the load cell. Hope that clears things up
Am really happy with the load cell!
Te anduvo bien compa? estoy en la duda si comprarlo o no (f1 2020 ps4). Saludos!
@@pelayovial4428 funciona muy bien la verdad, ojo con el peso de la célula. Con el de 10k creo que es suficiente!
@@RacingChileZanelli Muchas gracias, lo compro ahora. Saludos!
Fits that on aT3PA Pro too?
I want to buy this, I'm not sure if I should get the 20Kg or the 10Kg. Do you have any recommendations? I primarily play Dirt Rally, Project Cars 2, and Assetto Corsa.
The 20kg loadcell needs 20kg (44 lbs) of pedal pressure to reach maximum brake force. The 10kg version only needs 10kg (22 lbs), which is about the same pressure as needed for the conical rubber mod. If your pedals are hard mounted (and they should!), choose the 20kg. Otherwise, choose the 10kg.
@@loadcellmod5338 what if the pedals are hard mounted on a rig (gt omega) but the chair is not? To be honest when i have to push the conical brake hard sometimes the chair slides back. Does this mean that i am better with the 10kg load cell?. If i use the 10kg cell does this mean that the amount of controll decrease?
@@Alextraz If your chair slides back when using the conical, then it will certainly slide back when using the 20kg loadcellmod. You can try the 10kg loadcellmod instead. The 10kg offers the same amount of control, the only difference is the required force to reach max brake input.
10kg is very very light. I used a set of scales up against a wall to get a feel for how hard I press the brake today with my conical brake mod. It is much closer to 20kg than 10kg so I have gone with the 20kg model.
Nice, would like to resell these :-)
Hi, my pedals are attached to a wheel stand pro. I have two questions:
1) Should I use the 20 kg or the 10 kg mod?
2) In principle I can attach it also to the clutch pedal right (I use clutch for braking)?
You can use the 20kg. It's not possible to use the clutch since you need the bracket for the conical rubber to mount the loadcellmod. This bracket is located behind the brake pedal.
@@KlaasJanDijkema but the bracket for the conical rubber can be moved to the clutch in the t3pa pedals
How much for these mods.
HI, Why is there almost no pedal travel with this mod?
Because it does not measure braking force through how far you move the pedal (as they do by default), but how hard you press the pedal.
I bought this "product", and it does not work well... when i play iRacing i got issues, it works for 20 minutes and then, it works no more, i have to unplug and replug it...very useful when go for a race...and there is almost no pedal travel...no comment.
People, DO NOT BUY THIS PRODUCT, SAVE YOUR MONEY AND YOUR TIME.
Wow, Bagar, I understand your frustration, but maybe you could contact us directly instead of screaming it out on the socials? We're more than happy to find a solution.
@@loadcellmod5338 So did y'all find a solution or ?