Thrustmaster T3PA Pro Pedal - Load Cell To The Rescue
Вставка
- Опубліковано 5 сер 2024
- Thrustmaster has been one of the leading wheel manufacturers for sim racing since its very beginning. Over the years their wheels have come a long way and seen some major changes, enhancements and better performance. With that said the pedals that come with the wheels have left much to be desired. This even includes their best pedals and an upgrade to their wheel sets the T3PA Pro pedals.
The BF Electronics Load Cell mod for the T3PA Pro pedals is the type of upgrade that Thrustmaster has needed. Perhaps even the type of mod they should of built themselves. Is the BF Electronics the savior of the Thrustmaster pedals?
This is the full review including the installation process of the BF Electronics Load Cell mod for the T3PA Pro pedals. In this video Shaun tells you all about it and also shows what it takes to modify thee pedals. After that he takes it out for a spin and tells you how it really preforms.
BF Electronics: www.bfelectronics.com.au/produ...
Simpit Pitcrew Channel: / @thesimpitcrew
Please subscribe to The Simpit here: / @thesimpit
Our Patreon page:
/ thesimpit
For more sim racing news and shows please visit our website: www.thesimpit.com/ - Ігри
A load cell mod is incredible on these pedals! Highly recommended
Thanks for the video, I have the T3PA-Pro and I am looking for the next thing to upgrade :) Might very well be this.
So I got the bfelectronics T3PA Pro Load Cell kit. I must say that I really like it. Has it made me a better Sim Racer? Well, I consider myself a Sim Enthusiast, not quite a Sim Racer, yet. This is a secondary hobby to me. An experienced Sim Racer once told me that the only thing that can make one a better Sim Racer is “Seat Time”!
Anyway, to compare the bfelectronics T3PA Pro Load Cell kit to the Ricmotech or Bodin T3PA Pro Load Cell kits. Well, the Ricmotech & Bodin kits provide a stiff pedal post installation (like pushing on a wall), with some dead zone upon initial pedal depression. The bfelectronics T3PA Pro Load Cell kit provides use of almost all of the original T3PA Pro brake pedal throw, a slightly stiffer pedal feel (compared to the original feel before installation), and you can dial in your desired level of sensitivity, or dead-zone.
Lastly, you will have to get used to the amount of pressure you apply to your brake, there will be no Brake Mod crutch to save you from brake lockup. After installing the bfelectronics T3PA Pro Load Cell kit, you will not be able to use your Thrustmaster Compression Spring or Conical Rubber Brake Mods, if you wanted to.
The bfelectronics T3PA Pro Load Cell kit feels good, it was easy enough to install, and I am happy with my purchase.
Cheers!
Other UA-cam Pros and Cons Videos for Reference:
Thrustmaster T500 / T3PA Pro Ricmotech Load Cell Brake Review
Ricmotech Got my New Load Cell Kit! Review and Performance Test Video
(Ricmotech) Modified Thrustmaster T3PA Pro Pedal Initial Impressions
Thrustmaster T3PA Bodin Load Cell Mod Review
Thrustmaster T500RS (T3PA Pro) - Bodin Load Cell Brake Mod - Reviewed
bfelectronics Thrustmaster T3PA Pro Pedal
Great job! Awesome installation.
For me also the cheap 3drap mod made a HUGE difference. But with a brake this strong in my opinion you also need to upgrade the gas and clutch pedals because with shoes I couldn't feel those two
I got a T3PA pedal set on sale for $69 US. I added a DIY load cell for about 35$. They work great. I still use them with my DD1 from Fanatec.
Charles childers is it hard to make a diy load cell mod?
Interesting, they also have one for the regular T3PA, based off the conical bracket.
so does this still use the original poteniometer also? like the black gear cog? i got a set with broken throttle pot cog and wanna get loadcell for brake and use the cog from it on the gas pedal to fix,
Would it make more sense for me to get this mod for my T3PA pedals or just upgrade to some Fanatec pedals?
Given that there's already been a review of it on this channel, I really would have liked to have seen a comparison to the Ricmotech load cell mod. How would you say this compares? Any different/better/worse performance?
There is alot of free move before the brake kicks in thats not realistic to a race car pedal.
so, aside from how they measure diffrently. how does the same 2 springs become 5x heavier under braking? is it because the Load cell Mod compresses them alot more at a resting state?
Thx for the video. Can we do this with the t3pa pedal?
can you put on on the clutch ? Can you use this on the brake with the hydraulic mod.?
He guys, i have a question is the thrustmaster t-lcm pedal set same good ass the T3pa pro whit load cell mod? They have both loadcells. I dont have the knowledge ore the space and equiptment to mod the T3pa pro. i Just order the thrustmaster tx leather edition that comes whit the T3Pa. and i maybe go upgrade it some day later.
would this work for the t300 rs pedals? i really should just buy better pedals since ive got the money from heusinkvelds but no one has them in stock
That speech was epic.
Looks interesting. If it also works with a T300RS and PS4Pro I might get one and try it. One concern I would have though is a very heavy brake pedal slows me down sometimes, I removed my conical brake mod recently so I could brake faster for time trial record chasing on Dirt Rally 2.0. I also found some vehicles on GT Sport very difficult to drive fast with a heavy brake pedal force.
I tried the conical mod too, it's junk compared to this
There seems to be plenty of 3D printed mod parts for sale with quite hefty price tag attached. Any experience how durable these parts are?
if its PLA its pure powder after 2-3 years. look up "PLA long term". Better use ABS when printing stuff like that.
can i plug these via usb straight into a PC?
Instead of all that time and laborious stuff, (speaking of that) do you see that bubble wrap that came with the "mod"? I just "STUFF" that stuff in my pedals at different densities and amounts and create the same linear effect. (I have been for 1 1/2 years) Obviously, I don't do that on my way more expensive PC rig. I "rig" up better "stuff" on my real rig but, just stuffing different bubble wrap....uh....uh...."wraps" up the time on spent on my reasonably priced T3PA pedals. (Which, I wish I hadn't put in F1 style from purchase) ;)
Will this work with my thrustmaster ts-xw thrustmaster wheel base with the t3pa pro pedals for xbox?
I have both sparco wheel and ons for the ts-xw wheel base
Is this compatible with the older pedals that came with the T500RS? T3PA pedals look nearly identical.
It may have a problem on v1 and v2 pedals,cus we do not have the removable spring post.
we must be able to install it but as we do not have the same spring (in L) there is a risk of touching
on dois pouvoir l'installer mais vue que l'on a pas les même ressort ( en L ) il y a un risque de toucher
Need one for my g27 inverted pedals 😔
I need this before I go crazy and drop serious dime on Fanatec setup. Too bad they are out of stock and appear to have not updated their page in a long time.
tried to buy this seller did not reply to email. Bought Ricmotech. My leg muscles have adapted to the brake now lol
80€ + shipping, not a bad price compared with other manufacturers.
@Shambles1980TRealOne - Yes it is 3D printed, however, until Thrustmaster gives us new pedals with Load Cells, the Modder Community is all that we have.
As far as the price, compared to the Load Cell Mod solutions from simracingsolutions (£99.99), Bodin ($99.99), & Ricmotech ($169.99), the bfelectronics Pro Loadcell Kit (US$100.00) is not too bad. Further, it comes with something that those others do not, a dial for sensitivity and/or dead-zone.
Lastly, I am a confirmed customer, and I can confirm for you that I can brake better now than I ever could with my potentiometer-based sensor. No, 3D Printed Mods may not be beautiful. Quality of finish on 3D printed parts vary. However, the device is there to provide functionality. All that I can add at this point is that I am happy with my purchase.
Cheers!
@Shambles1980TRealOne - I can only agree with part of that statement. I do not have a 3D printer, the knowledge, or desire to do this myself. I could have built my home, my vehicle, and I could Doctor on myself. Yes, those are extreme examples, but you know what I am saying. I do not mind spending money on things that other people build (as you see). If you built something that I liked & wanted, I would pay you too. I totally get what you are saying. However, in the end, life is short, I can afford it, and I am VERY happy with my purchase. Nevertheless, I heard your point clearly.
Decent looking loadcell though that 3D printed case for it is terrible quality. Would be great if I could print it out myself and apply parts. I do like the use of the quick connectors though :)
Is it possible to use these with a g27 wheel?
It's pronounced Bris----bin.
$150 AUD is approx $105 USD.
I knew there had to be one. It's to the second, 104.55 to be accurate. Taxes might apply and credit card APR. Hmm
Just ordered my 30kg kit. Bill reckons about 2 weeks. The 50kg kit (that Shaun wasn't supposed to mention lol) are about 4 weeks away.
Bill seems like a top bloke. He responded to my email very promptly and was very reasonable in his response, as well as very honest as to what I should expect.
Actually more like Brisbn.
@@Jellybeantiger I always think Brisvegas .. although I am from Kydney.
*2:45** video info starts*
Why doesn’t Thrustmaster make a higher end pedal set? 🙄
They are a business. (What a concept) They want to make a profit.
@Shambles1980TRealOne Not really. Marketing, designing, compatibility, paying employees and the extremely limited market for high end driving simulator pedals. Thank you for reading my comment on a reply after 4 months. That shows you the small market in "literal" reality.
@Shambles1980TRealOne Now you have annoyed me. I have spent and own 100 times more equipment for driving sims than you. I was purchasing them before you were born. I'm 100% sure of that. The average meat bag doesn't even know what a load cell is. They say....are there pedals? Oh...cool. That's crazy. Now, your talking to someone with a hydraulic rig and load cells up the Yin Yang. High end driving or flight sim shit isn't where the profit is. If you owned a successful business, like I do and spent money on frivolous shit like I did, instead of giving the money to charities, then you'd actually have a minuscule idea about how the real world works. The profit margin and demand on high end pedals isn't enough for any company to sell these on a mass scale. A load cell would impact sales in almost no manner whatsoever. Take the load cell CSL Elite kit from Fanatec......it is 155.43 USD without shipping or tax and requires the Elite Pedals. The Ricmotech is 139.99 USD plus shipping and Tax. THAT IS MORE THAN THE THRUSTMASTER T3PA GOD DAMN PEDALS COST! T3PA PRO LOAD CELL IS 169.99 PLUS SHIPPING AND TAX! -Stop already. Get your head out if your ass. Now, if you say, "The cost to them is pennies." First of all, BS. Second of all, even if it was, ask yourself why they charge that much. Humans aren't beating their meat to buy these and they must be hugely marked up.
@Shambles1980TRealOne So what is stopping you from starting a company and providing this gear, if it is sooo easy?
@@UhhhhhnooOOo00oO you seem kinda crazy bruh
Does it work on ps4?
Yes they do!
thanks for confirming
THIS OPTION IS IN MOST GOOD GAMES, SO WE DON'T NEED THAT BUTTON
Who the hell uses the break and throttle at the same time?
I guess only me
Surprised they didn't even sand it smooth or anything. Left it raw 3d printed. They need to check into injection molding or a cast or cnc. 3d printing is prototyping
3d printing in general is good enough in terms of looks. This one just looks like they have broken or not calibrated printer, bad filament or they dont know how to print.
With this quality it should be free to download.
Helium being pumped into the room?
Thrustmaster have left their loyal customers for dead, I started with the TX wheel base and wheel with the T3pa pedels, but have moved onto the Fanatec drirect drive Podium DD1 and Fanatec pedels, it a pity Thrustmaster has not developed a direct drive wheel base, it is being left behind
WHY are you shouting ?? im giving you thumbs up anyway because..no background music .. thankfully
nice set up, but it looks like you have a cat? I see cat hair . white cat? lol
I have a little dog with a big dog complex🤣
anyone else read it as "simp it"? lol
+ 140$ !!! Forget me
That’s AUD, I recently bought set for $87 USD with international shipping included
Old TM pots suck...
fanatec cle elite with lc for $199 plus s&h
That is a great deal, if you are ready to switch ecosystems. I do not recommend mixing ecosystems (mixing Fanatec & Thrustmaster hardware), because it wreaks havoc with button mappings in most games.
@Womb Raider - That was my experience. Maybe they have fixed the issue since. It is all good. Thanks!
Looks a complicated install,no thanks,I am hopeless.
The bf electronics website is terrible
Is this compatable with the slightly different T3PA pedals that come with the TGT and also the T300 GT?
I believe that the TGT and the T300 GT are sold with the regular T3PA pedals. This mod is for the T3PA Pro Pedals. I believe that you will need the regular Thrust-master T3PA load-cell kit. more information about those are on the BF Electronics website.
Cheers!
@@MrThamahn They are not regular T3PAs. You can even see a pic of all three of them in this video at 0:44. Those ones on the left are the ones that come with the TGT and the T300 GT. The ones on the right are "regular" T3PAs.
@@hueysharapova7175 What are the differences between the standard T300 and the T300 GT Edition pedals? You get the 3-pedal T3PA set with "New Pedal Faces"… And that’s it. Visually, the new pedal faces are a nice upgrade from the standard T3PA faces, with clean lines and brushed aluminum.
I understand the mix-up, however, Shaun does state that this mod is for the T3PA Pros (0:48).
@@MrThamahn I mean yea, it is true that the only thing different is pedal faces, but by that logic, wouldn't everything be compatable with all 3? The "Pro" set is just a backing mount for inverted. Regular T3PAs can actually be inverted, but you can't swap the pedals left to right. All the third party stuff I see is for regular T3PA and Pro, but the new version is really important because the TGT is the best wheel for Gran Turismo, which happens to be the only racing game with an online community, and the T300 GT is just a great deal right now assuming it doesn't break.