[MSFS] How to get a SMOOTH experience in Microsoft Flight Simulator 2020
Вставка
- Опубліковано 23 сер 2024
- In this tutorial, i show you how to improve the smoothness of Microsoft Flight Simulator 2020 by adjusting your Nvidia Control Panel settings and match vsync correctly to your monitor refresh-rate.
If you have any questions, write them in the comments!
[SOCIALS]
Facebook: / pilotpeteflightsimulation
[DONATIONS]
If you liked the content and want to buy me a coffe, every donation is highly appreciated:
www.paypal.com...
[SIMULATOR]
Microsoft Flight Simulator 2020
[ADDONS]
[PC SPECS]
Intel i7-9700K @ 5 GHz
ASUS STRIX RTX 2080Ti OC 11GB
ASUS Z390-F
Corsair Vengeance LPX 32GB RAM
Samsung 960EVO NVMe M.2 500GB (P3D)
Samsung 850EVO 250GB (Windows 10)
Corsair H110i
be quiet! Dark Power Pro 11 750W
Let me know how it worked out for you and if you have any questions 😃
i have amd …
Absolutely the BEST BEST BEST Video that actually worked to give me a solid 40 to 60 fps and it is the smoothest ever! That you so so so much, I watched so many other videos and no one address the most important issues that was the Monitor refresh rate and the setting in nvidia. Anyone watching this is the only video that work!!!!!!
This was my exact issue. My hrz was way off and had set to 144. Followed steps and now I have my sim back. Great vid
I kinda feel that a lot of users here are just not quite getting that we are trying to smooth the FPS out, not get more fps at the expense of choppiness. I've been programming graphics for many yrs and it looks like you're on the right track!
It's very much like cinema. We enjoy watching film at 24 fps but if you start dropping a frame here or there, you will really notice that. Same thing applies here. Thanks!!!
That is exactly what i tried to explain. Its not about amount ofFPS but visual smoothness. Thank you 👍🏼
"Low" 30FPS stable will be smoother than 30-50FPS fluctuating. :)
Very helpful. Your instructions and explanations are very clear. I made these settings changes after the latest sim update and things are now working well again. Thank you!
Hello from Canada! Just wanted to mention (not sure if it has already) but in my Nvidia control panel there's a new setting called "Max Frame Rate" and you can fine tune your fps limits there. :) Thanks for the video it was very helpful! o7
Pilot Pete this works a dream no more micro stutters followed your recommendations to the letter-- Thanks again
Been using you settings for 12 days they really good --keep up the good work
Hi Pete your settings are perfect. Are you thinking about an update since the last update works perfect at the moment. Not sure its needed?
Hey mate! Im glad it helped. I plan to do some updated videos soon, yes :)
Thank you, really great explanations, I will try these settings!
Awesome Man. Just followed your steps by Ultra Settings and getting with RTX2070super and Ryzen7 2700 in EDDM with FBW A320 in rain and massiv Clouds smoother 30 fps than before that on Low Settings. Tanks so much
Fantastic Pete sorted my screen tearing out....top fella
Thank you for this video. I have been wondering about small microstutters often observed in cockpit when panning views at take off on my PC. I had VSync on at 60 in game but limited my FPS to 40 in NVidia control centre so as to not max out the GPU. Overall quite smooth, but with a few micro stutters panning views on takeoff in dense airports. I was very skeptical about switching to a VSync of 30, but I watched your video, changed to the Nvidia settings you recommended and set VSync to 30 and the fluidity of the panned views is amazing now. So a big thank you. Not many people seem to grasp that smoothness in FS isn't related to purely FPS. I also suspect many XBox users who are reporting stutters could be seeing them because they picked 120Hz as their refresh rate simply because it was there and a big number and their TV supports big numbers and bigger numbers have to be better right?
Your video is fantastic! It work. My camera movements are smooth as a babies bottom. lol
spot on, its about smoothness and not all about the max FPS
Thank you! This was most helpful.
great fix for laptops where thermals are a concern. Lowered my temps 5 or more.
awesome mate worked a treat thanks stutters all gone
Servus,
Vielen Dank für das Video. Hat mir sehr geholfen.
Welches Tool verwendest Du denn um die FPS anzuzeigen?
Danke für dis Video! Mega guet erklärt!✌👌
Thank you for yout time and help.
Thank you for your video. I already knew that one has to sync / block the FPS (60 - 30) to match the Hertz (60) of the monitor,
but you have explained it in a very clear manner.
There are unfortunately STILL people out there that have not understood this..
Did you post your excellent video on the MSFS forum?
Thank you very much alfredo! Yeah, i already shared it on the MSFS Forum. I think it is important that people realise how to setup monitor refreshrate and vsync/framelock correctly. :)
This game driving me crazy with the graphics settings. I think my i5 9400f is the problem
Excellent! Tks for sharing. Appreciated!,,
Just finished home build, used your recommendations. Very solid 2020 sim with high settings, thanks again!
Hey Pete, thank you so much. Very good and smooth solution. RTX 3070 all on Ultra. Does it also work in VR? with Reverb G2. Shall I run the G2 also with 60 Hz?
Great improvement with frame rate, using i7-9700 with Nvidia 2080TI
Thanks!
Thanks for your Feedback, same setup as mine 😁👍🏼
Will try this out! Thank you mate.
Thanks mate, let me know if you like it. I see youhave some nice videos aswell, ill subscribe. :)
Hi, really useful video thanks. I was having tearing issues and this fixed it. But had an issue with one of your recommendations. I set my TV refresh rate to 30Hz as suggested but in the sim the frame rate was reduced to 15FPS. So I had to increase it back up to 60Hz. All other settings were as you suggested, including Vsynch in the sim and capped to 30FPS. I have a 1080Ti and 4k 120Hz TV.
Yeah, this can happen sometimes on a few systems. I run 60Hz too on the monitor as it has no 30Hz option. I heard from others about the behavior you described.
4k 120hz tv lmao nice 20ms of input delay
Thank you....Thank you, what a game changer! amazing difference!
A brilliant tutorial thank you
thank you very much for your video, may I ask why you only make settings at "Global Settings" in the control panel, I have only made settings at "Program Settings (MSFS2020) so far...Thank you very much for your feedback...
Great video!
Thanks for this, giving this a try. MSFS seems to have a strange behaviour when it comes to the V-Sync/limit option. It seems if I set my monitor to 30hz and in game to limit 30fps, it gives me 15 fps. And 30hz / 60fps in game gives me 30fps, also 60hz / 30fps in game acts as expected - 30fps. It's like the frame rate limit only knows how to behave properly if you have 60hz refresh rate, anything above or below that it kind of works as a limiter by a percentage and not an actual FPS value.
Yeah, it looks like multiple users have this problem, not me tho. However, the workaround is to not use ingame vsync but force vsync in Nvidia control panel. Youcan use "Adaptive vsync (half refreshrate)" for example. Or fast vsync, you have to experiment what works best for you. :)
@@PilotPete Strange isn't it! In the end I ended up getting g-sync to work and also forced fast v-sync which I'm going to test for now. Appreciate your video and the great explanations!
It's a MSFS Vsync thing. Long Story short: if you set VSYNC to 30 it is HALVING your monitors FPS (MS thinks 60 is still the standard). So if you limit your monitors FPS to let's say 50 and in MSFS you choose Vsync 30, you will end up with 25 FPS. Stupid, but it is what it is.
@@DanBirasi Strange isn't it! However I have recently starting using the sim on another monitor which seems to work as expected 60fps limit/Vsync in game/60hz gives 60fps output. The only difference here is that monitor is 1440p vs 1080p.
THANK YOU
Wow, this is the most impressive tweak I’ve ever seen in any simulator I’ve had for so many years, thanks! Curious, can this same kind of action work for xplane 11 as well?
Yes, basically worksfor every Sim/Game.
i appreciate the help. i hoped this would work for me (as it seems it has for many others), but sadly it hasn’t. it had a slightly negative impact on cpu response time and a profound impact on gpu response time.
Danke - hat funktioniert! : )
Very very useful video , thank you very much
Hello, please do a update video of this video. Sincerely.
Thanks for the great information regarding performance. What software are you using to display the graph and performance numbers in your video?
Hey John! Im using RTSS (Rivatuner Statistics Server) together with HWinfo to get all the values displayed that i need for monitoring. Both are free and there are some tutorials on YT to find how to set it up as you need it.
An alternative would be MSI Afterburner which, i guess, includes RTSS aswell. :)
Which app were you using to display FPS graph in milliseconds? Thanks!
I tried following your instructions to the letter. Prior to adopting your adjustments I was achieving 25-35fps. After your suggested adjustments this went down to 0-9fps. I reverted to my previous settings and, once again, achieved 25-35fps! So, thanks for your suggestions but I think I’ll stay as I am!
Oof, definitely theres something that went wrong on your side, no setting described here should tank your FPS like that.
Nice video and also a nice airport LOIH :)
Haha, mein meistgenutztes AddOn momentan, danke dafür Mike! 😁👍🏼
That reminds me at the FSX times. At That time the CPU made the Problems. Half refresh Rate Affinity mask Tweaks ... more tweks than airborne. I´ll never forget :-) good Video by way. I tryed it on EDDF Deluxe out with a RX 590 in a Ryzen 7 3800x System with 3600mhz CL16 Ram and it works perfect if you reduce renderscalling to 75% with high to ultra Settings! straight FPS by Temps inside the Sapphire Specs and full Specs in the silent Bios! Tomorrow i´ll change in the OC Bios and see what happens inflight from EDDM to LEPA, crossinng the Alpes. Best Benchmark. Terrain level of Details 150! See what happens! My first Sim was FS98, any questions? :-)
by the way dont buy the deluxe Version for EDDF because that Airport is crap and they dont work on it. That is that wat me makes angry as a flightsimer since 20 years. Points of interests .. wuhuu ^^ I dont see them on FL 370^^
Thanks for the video , it was of help .
OMFG life saver thnx alot :D
I have nvidia 4090. which type of driver is the best? Someone suggests studio drivere instead of ready game driver. which driver do you use?
Thank you Sir, very helpful. Quick question, what about the Nvidia GPU scaling and Win 10 Game mode? Do you use them?. Thank you again
Hey Predrag! Yeah, i have HAGS (Hardware Accelerated GPU Scheduling) on and also Win10 Game-Mode. However. I tested with both on and off and i cant really measure a difference. I heard that with VR there was an issue that HAGS will cause stutters. But so far with a normal monitor, i cant really see a difference.
Maybe ill do a more indepth performance-test in the future where i compare every Nvidia-Setting, Game-Moden and HAGS in more detail. But with a good CPU and GPU i dont think there is a big impact to be honest.
Test it on your system and if you can see a difference, let me know! :)
@@PilotPete Thank you for your answer, here also switched both to off. Using i9 10900 and RTX 3070. Regards
thank you for this useful video, interestingly I have the same monitor as yours (on the video). however when i did switch on vsync and set the FPS to 30 and changed the refresh rate to 60hz, it seems to show that "limited by GPU". i have g-sync, so then i switched off the v-synch which improves the fps. any thoughts as to what i can do to reduce the gpu load?
Did you changed anything in the Nvidia CP prgram settings part where you can choose MSFS2020 or only in the global section?
I change it in the Global tab because i dont really play other games. But if you want to change the settings only for every specific game, then use the Program-Specific tab. Its no difference. :)
Thanks for the useful info, could you post the Graphics and Traffic settings you are using? Trying to compare this to other similar tutorials to see what the consistencies are regarding performance settings.
Well, depends. Im running Ultra at 3440x1440 when vfr. Something between high-end and ultra when flying the CRJ.
Sim-Settings are always dependent on your system and resolution. Theres not much benefit from using others graphic settings, you have to find the ones that fit your system. :)
@@PilotPete Gotcha, thanks for the info!
One question.... I have a G-sync capable monitor like you. Should i enable it or disable it? Mine is a Acer Z35 Predator and i LOVE IT :P
Personal preference, doesnt matter
once you have set your final settings, there is still an issue visible in your video. maybe its not tearing, rather it's smearing. look at the cockpit gauges when you pan around... they are steill somehow chopped/blurry -> smearing. any further improvement for that?
Pls help me when i put any plane to fly the plane is white sry my english i will explain again
When i want to fly for example emirate plane i load in to game and the plane is white pls help ty
Thanks love it good work
What is that FPS overlay? Which tool?
Does is also go if you are running G-sync with a G-sync capable monitor? I was always told to choose G-sync over V-sync.
What are you using for a monitor? I use MSI Afterburner/RivaTuner and for the most part, I like it. I just am wondering how to get that graph.
Im using RTSS, Rivatuner Statistics Server, together with HWinfo.
Ive been hell bent on getting 60 which i can with 3070 ti but i tried your tweak and definitely smooth at high settings. A side note after sim update 6 i still get blown out highlights say when im looking down at the instruments almost like the camera iris is adjusting. Why thats in the game i don’t know. Any fix for consistency?
thank you, my game is running very smooth now
Hard for me to run this sim @30fps even if its smooth the latency is just too much as I am just so used to running @40+fps.
A constant 60fps would be a dream in this sim especially flying airliners!
What are you using to measure the frame rates?
Riva Tuner Statistics Server (RTSS).
Its free, youcan google it. :)
Exactly the opposite happens to me. I have the monitor at 30Hz and the simulator runs at 40 Fps... but when I activate V-sync and limit it to 30 frames the fps drops to 15 :S
I see you have a G-Sync monitor. As I understand that should sync your frame rate and refresh rate automatically and much better than V-Sync. Is that not the case?
Unfortunately, i dont get Gsync to work properly with MSFS. Thats why i use fixed framerate. :)
@@PilotPete Ah. I see. Thank you for the clarification.
how do you get the orange specs on the top left?
If my monitor is 240 Hz should I have it set on 240?
Helped me a lot danke mein freund. And what is actually render scaling for? Explain pls
Hey Mark! Renderscalin in the game menu? At 100% it will render the game at your native resolution. When you need more performance you can reduce it below 100% but it will lower the resolution the game gets rendered at. So it might be a bit more blurry. Id not go below 80-90%. If you increase it above 100% it will be sharper but will reduce performance. Id say leave it at 100% unless you really need more performance. :)
@@PilotPete yes i see, tnx again bro👏🤝🤟🙏
Thank you for that video.
Obviously we cannot see your screen tearing, as we don’t sit next to you watching the scene Inside your monitor 😇
But I highly recommend you use your G Sync. I saw your answer to a suggestion like this before, where you said you don’t manage to get it to work. I can say, I never had trouble with it. All you need to do is to use a DP cable, instead of a HDMI cable. And of course you graphics card needs to support it too. But to me G Sync was a game changer. No more screen tearing plus a reduced input lag (not so important for GA, but when it comes to air combat you need all quick reaction speed you can get). The MSFS was always a pain in the lower behind regarding FPS. Currently I am running it on an i9 and a RTX3090 on a 5400x1440 G Sync screen and in dense areas together with a glass cockpit aircraft (FBW A320) FPS sometimes drop to below 25...limitation doesn’t come from the GPU but from the main thread. I spoke to a guy who is a hardware expert and knows the MSFS and showed him my specs and FPS and he said: well that looks pretty good to me 😅 viele Grüße aus dem Norden in die Schweiz.
Hey Mate! Yeah, i realised you guys can not see the tearing, but anyway. Believe me, im tech savy and have tried all possible solutions, my monitor doesnt like MSFS. Of course i use a DP cable. It works with every other application but not with MSFS. Thanks for your suggestions anyway! :)
Und Gruss zurück! :)
@@PilotPete hmmm...that is Strange. I never had problems with it and regarding Adaptive Vertical Sync the MSFS is a Program like any other. Anyway. Thanks for the video und dann demnächst ein schönes Wochenende.
@@SirJohnPhillip Ja, scheint als stünde ich ziemlich alleine da mit dem Problem, hab im ofiziellen Forum schon mit vielen Gsync-nutzern diskutiert, ich kriegs nicht hin dass es sauber läuft. Es läuft kurz korrekt, bis ich die Kamera bewege, dann springt der Monitor wieder zur fixen Refresh-Rate, steht das Bild still gehts wieder bis ich die Kamera bewege... echt nervig... aber egal. Mit meiner Methode aus dem Video bin ich eigentlich sehr zufrieden. Läuft flüssig und Ruckelfrei. Vielleicht klappts ja dann irgendwann mal noch. Dir auch ein schönes Wochenende! :)
Someone suggest this guide on the MSFS forums. My results it made my performance worst. The sim has change a lot probably compared to when this was uploaded. ATM better performance when Nvidia is left at default. (Let the 3D application decide)
what is the program you using for showing fps and the line for smoothness ?
Msi afterburner
could this setting working even for nvidia 4090? I'm exeperimenting some stutteringfrom the installation of 4090; My pc is window11 pro, geforce 4090 and intel corei9 13900 K
I forgot, my monitor is samsung odissey 49" curve resolution 5120X1440. It has an update frequency max 0f 240 Hz. I have to set at 60 Hz?
The „trick“ is to set your refreshrate lower than your minimum FPS. You can play with the Vsync settings in MSFS. For example, you set your monitor to 60Hz in Nvidia panel and 1/2 refreshrate in MSFS Menu, will result in 30FPS lock. However, with your system, you can probably go for 40 or 50FPS
Your tips gave me a good 10fps flying in the most taxing areas in an airliner. Only problem is when I put on Vsync it halves my FPS to 15fps... When I turn it off I get 33/34fps. Any idea why? Could it be conflicting with the refresh rate I set in the Nvidia app? I turned mine to 30hrz
Try to use Vsync ON in Nvidia panel and set vsync off in game, then it should work fine 👍🏼
Thanks that worked. Seems like the settings in game for frame cap acts as a divider, so I was set to 30fps Vsync in the game and that was dividing my refresh rate by 2; which was set to 30hrz via NCP
This didn't work at all for me. Just destroyed my previous frame rate. Wen to defaults settings. Thank's anyway
Vsync seems to have issues on some systems. You could try to use adaptive vsync or half refreshrate in Nvidia panel as alternative. Sorry it didnt help. :)
My dear Sir, the problem that I have since the last update is the CRAZY stuttering that I get ONLY when the plane is taking off or landing and during taxying, as soon as the plane takes off its all good, can you help me please?
Unfortunately i dont have this issue so i cant reproduce and help. Your best bet would be to search in the msfs forum, i know there are other peoples reporting similar issues. Also, it COULD be that you LOD is just too high for your system? As when you are low on ground the high LOD is more demanding than when in flight, thats atleast my observation. :)
@@PilotPete can you tell me how to control lod?
Thanks for your reply
So. Here is where I stand...
I did as u said. I dont have the fps monitor that you have so I used the one in fs. Im not sure exactly what its telling me but I guess red is bad, harhar.
Ok, h/w is a alienware i9 w/ 2080 TI, 32 gb ram... decent enough right?
Ok, first, I changed stuff so I get 40-50 fps when wide open. For some reason, things get way worse (stutters and red lines) when I throttle frame rate back to 30. Mine really truly is performing better when wide open rather than limited! I really want to understand whats happening better but I dont have the patience to learn the new fps s/w that u use.
Im seeing very few frame skips while sitting in my a320 at ksee.
Any advice???
Hm, thats strange. Whats your monitor refreshrate and did you limit the frames by enabling "vsync 30FOS" ingame?
Also the A320 is not the best plane to test this. Performance in glass cockpits is subpar, especially in the FBWA320NX. Thats why i dont use it. Stutters are pretry bad in this one. Test in every other plane but no default glass cockpit ones, optimisation is very bad right now in them compared to all the other planes, they are way too heavy on one single CPU core.
@@PilotPete Ahhhh. That could be. The 320 has a lot going on.
My monitor = 120hz. But why when I set refresh to 30 that I get missed frames all over the place.
I dont test what I dont fly...I need my A320 to perform as well as can be. And I see many study level craft in the works that are gonna be frame gobblers.
Sure, i understsnd. I dont get the A320 as smooth as i need. And no, see the CRJ, how smooth that is with much more systems simulated than the A320. Problem is, default Glass cockpits use JS/HTML for the displays / systems. Study-level 3rd party planes have to be donewith C++/WASM, as the CRJ. Then they are very easy on frames.
ASOBO will move the Glasscockpit rendering to another CPU corein the future, that SHOULD optimise the bad performing default airliners.
Check out the CRJ, performs the same as a C152. If coding is done right, theres no performance issues. :)
That is absolutely true. JS is Waaay slower than C++ which generates low-level, fast machine code. Having 20 cores doesnt do us much good if msfs only uses 1 of them, at least for all general stuff.
But my question remains...why do I get super crappy stutters when I limit to 30fps? Im getting 50-60 fps with it off and waaaay less stutters...Im assuming msfs built in fps monitor showing red means we were late setting up the frame.
Am I reading it correctly? It even looks worse while panning around, anybody know?
How does V-sync work with G-sync?
Hello I'm very new to MSF and for some reason I can't get the fist part of the flight simulator panel it goes to the next one can you please help
Hey Stewart! What exactly do you mean, where are you stuck?
@@PilotPete one the main screens the options part sorry I'm not explaining it very well I can't get to the first setting in the 3 windows it just closes the game down :(
Can Microsoft EVER make a product that works properly and that does not require you to constantly tweak and fix it?
Buy it on Xbox and you dont have to worry about settings 😁
Honestly, its not an issue, you can play it out of the box, but PCs give us the advantage of changing stuff for a better experience. This is not about tweaking Sim-Settings, just about your Hardware.
What about G-sync? and why not just run the Nvidia control panel refresh rate at maximum and then limit framerate in game?
Gsync is thebetter option if you have Gsync. On my end, Gsync doesnt work well tho.
What do you mean at maximum? We only limit the frames in game. :)
@@PilotPete yeah I meant that in Nvidia ctrl panel the smart thing to do is to set the refresh rate as high as possible.
also, what do you think about the yoke/stick error that I made a video about?
@@Neumannen i will watch that and see 👍🏼
Does anyone know what I need to upgrade for running without a big lag?
Specificaties:
Moederbord: AMD A320
Processor: AMD Ryzen 3 2200G - 4 cores - 8 threads - 3,6 Ghz (4,0 Ghz turbo boost)
Videokaart: Onboard AMD Radeon Vega 8
RAM: 8GB DDR4-2666 Mhz (1 x 8GB)
HDD: 1TB 7200 rpm
Hard to tell. We need to know your resolution and how many screens you are running. 4k for example is VERY demanding...
Shooter players trying to play simulation games and want max FPS = LOL
Yes, because playing sims with low FPS is shi.......
@@leifson68 😂🤣
What is your tool for show FPS ?
I use RTSS (Riva Tuner Statistics Server) together with HWinfo. :)
RTSS is part of MSI Afterburner. a free software from MSI which works with every graphics card of any manufacturer. take care of downloading the MSI afterburner from the right source (MSI original site), as i have read yesterday that there is a fake one out there.
Cant find any of the mentioned settings in Radeoin Software! An AMD tutorial is welcome as we have more then enoght NVIDIA videos
Yea, i know. Unfortunately i dont have a Radeon card but im sure you can change similar things there?
For low latency mode, I only have an off and ultra option. Help?
Yes, everyone has. Put it on ON.
@@PilotPete how can I do that if I don't have the option? Your video so far has been pretty helpful, and both options kill my laptop. My specs: core i7 9750h, rtx 2060 mobile, 16gb 26667.
Ah, i miread that. Seems your card does not support that,then just lleavi it of. Are you on the newest driver?
@@PilotPete yes I am. Had an update a few days ago, and checked an hour ago.
First step get six RTX 3090s
Haha, id be happy if i could find only one for a somewhat reasonable price 😁
@@PilotPete I was one of the lucky ones found it on EBay took a risk and received it. They will make more once the chip shortage and what ever other problems they are having are over
Lucky you 👍🏼
Till then we have the 4080 i guess, ill wait, the 2080Ti does still fine 😁
@@PilotPete Well the situation was not lucky my hard drives all of them got corrupted so I sent my pc into get repairs and it just so happened they had three RTX 3090s there so a bad thing turned into a good thing really quick.
I have one too and the most common thing that is happening now, that my main thread (cpu - i9) is limiting the FPS. 😄
No change at all..
I chose a different method. I spent an untold amount of money on my pc and just use the Ultra settings
Thats great! However, you still might want to change some things i mentioned. Theres no PC Hardware right now that will run MSFS with stable 60FPS right now in every situation, unfortunately.
Also, the limits are mostly by the CPU so even if you get a 3090 GPU it will not use its full potential.
But im sure you will have a great time in MSFS with your setup, enjoy it! 👍🏼
My PCs lowest HZ is 120 lol
Oh wow :)
You can do 2 things if youwant to trymy suggestion:
1. Set a custom resolution with 60Hz in the control panel and seeif your monitor supports that.
2. Turn on vsync 30FPS in Sim anyway and see if its smooth for you. It theoretically should, just instead of every second refresh cycle, you will see a frame every 4th refresh-cycle. (120:30).
Buy a $2000 computer then it will run smooth..
Trust me when I saw it won’t
Appreciate the effort but you should really rehearse / edit your videos. Also if you can summarize the whole video in sentences it doesn't make sense to upload a 15 minute video. Respect the viewers time.
Hey Lukasz! Thank you very much for your input. I agree it can be optimised, english is not my native language and it is not too easy to explain it correctly in a foreign language, it can definitely be improved.
I think i will write a script for the next tutorial, this will make it more pleasant for the viewers.
Thank you for watching! :)
This game driving me crazy with the graphics settings. I think my i5 9400f is the problem
Yes. A good CPU is very important for MSFS. You might think about an upgrade :)