Waste Oil Stove made from Beer Cans - Full Tutorial 4k
Вставка
- Опубліковано 18 гру 2022
- My video Equipment:
4K Camera: goo.gl/gfXPDe
Voiceover Mic: goo.gl/zCYhiy
Video lights: goo.gl/8n8LzE
------------------------------------------------------------------------------------------------------
Donations:
PayPal goo.gl/GHa0Gq
------------------------------------------------------------------------------------------------------
Stay Tuned on my FB / rulof.maker.youtube
Darkness is Coming di Kevin MacLeod è un brano concesso in uso tramite licenza Creative Commons Attribution 4.0. creativecommons.org/licenses/...
Fonte: incompetech.com/music/royalty-...
Artista: incompetech.com/
Alien Sunset di Audionautix è un brano concesso in uso tramite licenza Creative Commons Attribution 4.0. creativecommons.org/licenses/...
Artista: audionautix.com/
Atlantis di Audionautix è un brano concesso in uso tramite licenza Creative Commons Attribution 4.0. creativecommons.org/licenses/...
Artista: audionautix.com/
This is a speech translator written I am sorry if there are some mistakes it’s a Google program speech and writes it’s only for UA-cam algorithm
Hi in this video, I will show you how to make yourself at home very simple, but powerful stove that works to heat and warm up my house. It’s just an experiment we are building together and to see how to use waste oil that came from the kitchen and was used to cook food . How powerful can be if it’s burned this way we can use the power of these ways oil to produce fire, and to heat up a house. This is a three step ProRes Video which means we will understand together how to improve and not make any more mistakes with the stove. Like this. At the beginning we are producing a lot of smoke because I exceed with the oil flow, the oil that is inside the stove cannot burn properly, and then began to produce a lot of smoke this smoke, we will suffocate the fire and reduce the power of the hitting fire
 In this case, we are having a much more regular fire box we can see that he isn’t enough to heat up and make the stainless steel pipe gets red hot. I tried and to extend the south pipe from the stove and then this case I also install a smoke filter that can filter or the toxic smoke coming from the store. This is important because I don’t want to intoxicate my planet and after the filter a seat as well that the exhaust of his finger and longer can really work.
We have a much more powerful suction from the exhaust pipe, which also suck more fresh an oxygen from the little holes on the base do you say will produce much mama more powerful flame that heats up all the stainless steel it’s crucial to use this material because other materials will get rusty very soon because the fire and hit against Mantha Weila Cesare pelotuda Ross process
In this case, I decide to use old beer, cans and tool stainless steel containers to build myself my own little stove prototype
And I use a little regulator to control the oil flow that came directly from the bottle. This oil drops falls into as motive. In this case I use vegetable oil that was used to cook and fry food, but is also a good experiment to try next time to use motor oil or waste Montoya motor oil
So I will say that this project even see if you can if it
So I would say that this project, even if it seems safe to use I really recommend not to try to replicate it and to try to do what I did in this video is important to say that play with fire is dangerous. Don’t try yourself at home what you’ve seen this video
I hope you like this kind of video and if you have any suggestion about how to improve or to fix some mistakes I’ve made in this tutorial. Please let me know. I will try to do another project next week.
 - Навчання та стиль
I've spotted you're Italian from the way you drink beer 😂😂 (also, that "lattine in acciaio" banner helped) fratello Italiano! Bei contenuti, complimenti - mi sono iscritto 👍
Just a little tip for people who need to make holes to glass. If possible cut, puncture and drill glass under water. The glass wont chip or shatter. With a hand drill you obviously need a longer drill bit shaft, but it can be done.
great work, thank you.
Coil a copper pipe around the chimney and pump water through it to a radiator, fan so you can extract even more heat from the system and cool the chimney down at the same time.
Interesting, new sub 👍
I saw a video on youtube where they are bending the input tube to pass over the fire inside the fire chamber to build oil high pressure and it becomes more efficient
Have you thought about using the blue-whirl effect for cleanly burning the oil? Scientist looked for a way to cleanly burn already burning oil leaks on the ocean. Although the phenomenon is to unstable to recreate it on the ocean (at least until we figured out how to artificially generate a wind hose in the middle of the ocean) it is possible to create a vortex in the lab, that cleanly burns a puddle of oil swimming on water.
The more easy way would be to look at how oil-fired heaters work.
Edit: Just look at wasteoil burners that work with preheated pressured air (external fan). Sure, my idea above is more elegant because it doesn't need electricity, but is less pragmatig and scalable.
Very nice channel, funny also.
Воздух надо подавать принудительно с помощью вентилятора
It is much better if you could make some sort of cage around the burner to protect others from burning themselves.
Why don't you (and the Chinese) put the oil in a generator placed outside the house in a safe enclosure with a more descent pipe? I am considering such a solution myself (in Scandinavia) if I cant get an oil agreement with a few restaurants...
You could probably drill glass more precisely if you held the glass portion under water (found experiment on this here: ua-cam.com/video/tEAxhMECluM/v-deo.html)
это в Украине именно дома ,жилые помещения так отапливают.А в России не жилые а временные постройки.В основном гаражи,цеха...Но что там что там иногда они взрываются и устраивают пожары.
I've never seen STEEL beer cans!
All I know is aluminum
*LUCIA WAS HOT! where is she?*