Focus RS COBB Accessport V3 2016-2018 Installation

Поділитися
Вставка
  • Опубліковано 5 жов 2016
  • Bill shows you how to install an COBB Accessport V3 on your 2016-2018 Focus RS.
    Purchase Product Here:
    www.cjponyparts.com/cobb-acce...
    Want to apply custom tuning to your 2016, 2017 or 2018 Focus RS? Break the limits with this surge of automotive potential.
    You'll have no problem navigating through the COBB Accessport V3 friendly interface, easily calibrating your engine to fit your custom needs. When you need control, don't live in the constraints of factory settings, get aggressive results with COBB.
    Mapping with you in mind. Use the pre-loaded maps that are right at your fingertips or get a more personal touch by creating your own! Also, if you ever want to take it back to stock, there's an easy reversal for that.
    Installation isn't going to cause you a headache, this is a straight-forward and relatively fast install that has you back on the road in no time.
    Check out more Focus RS parts from CJ's here:
    www.cjponyparts.com/ford-focus...
    Check out more COBB parts from CJ's here:
    www.cjponyparts.com/cobb-tunin...
    Subscribe to CJ Pony Parts on UA-cam here:
    ua-cam.com/users/subscription_c...
  • Авто та транспорт

КОМЕНТАРІ • 27

  • @cindysue5474
    @cindysue5474 7 років тому

    Can you raise the top speed through the RPMs or does it limit it another way?

  • @michaelb9757
    @michaelb9757 5 років тому +6

    Will this work on my 1986 escort LX?

  • @num2line
    @num2line 5 років тому +1

    Do you have to keep it plugged in after the tune is installed?

  • @danielperez6396
    @danielperez6396 4 роки тому +1

    is that a stock blow off valve on the car?

    • @SpankyyRS
      @SpankyyRS 4 роки тому

      It’s a turbo smart bov

  • @ethanskogen1893
    @ethanskogen1893 4 роки тому

    Will it work with a st too or is it just for a rs

    • @txcavi
      @txcavi 4 роки тому

      This one is for the RS only. There is one for the ST, plus it's like 300 bucks cheaper.

  • @ItsRiley3
    @ItsRiley3 7 років тому +1

    Do you need to tune your car if you get an intake or blow off valve?

    • @Zerogivengarage
      @Zerogivengarage 7 років тому

      No you do not have to tune it but you will see more power with a tune.

    • @tylerbutt5283
      @tylerbutt5283 6 років тому

      get a wastegate actuator u will notice it for sure without a tune

    • @adamfreeman6640
      @adamfreeman6640 6 років тому

      No I have a boomba Racing and roush Intake on my stick RS no tune done. You will notice a whistling noise from the fuel intake if you choose roush and as for the BOV that’s just for sound affects. I noticed a little more stutter on my idle though with thenintake and no tune

    • @oscaraguayo3582
      @oscaraguayo3582 6 років тому +1

      Tyler Butt you can’t run an aftermarket wga without a tune

    • @adamfreeman6640
      @adamfreeman6640 6 років тому

      You can run a turbo waste-gate with no tune... I’ve been running mine with no tune the last 6 months.

  • @iTryaiK
    @iTryaiK 4 роки тому +2

    Can i leave my car on

    • @cjponyparts
      @cjponyparts  4 роки тому

      You do not want it running, the screen will tell you when to turn on and off the ignition.

  • @princessmia2031
    @princessmia2031 7 років тому +2

    Will this work with a 2017 focus st

    • @dougieV23
      @dougieV23 4 роки тому

      Cobb has the tunes for the ST as well

    • @8figureant516
      @8figureant516 4 роки тому

      Will the RS ACCESSPORT WORK FOR THE FOCUS ST ?

    • @annoyedchef7124
      @annoyedchef7124 4 місяці тому

      ​@@8figureant516nope

  • @kevinparker461
    @kevinparker461 3 роки тому

    And in 2020 Mountune can give you 500+BHP!!

  • @RobertKohut
    @RobertKohut 7 років тому

    Nice!!!

    • @cjponyparts
      @cjponyparts  7 років тому

      thanks!

    • @HackerreiChannel
      @HackerreiChannel 7 років тому +1

      This car really needs a stronger drive shaft with a rear diff cooler. It could also use a way to make it all wheel all the time with a degree of rear wheel bias.

    • @cindysue5474
      @cindysue5474 7 років тому +1

      If they dont make them already Iam sure the company (Drive shaft shop) will be making them down the line.

  • @FOX11GUY
    @FOX11GUY 6 років тому

    cool.