Focus RS Eibach Spring Pro-Kit Set 2016-2018 Installation
Вставка
- Опубліковано 3 жов 2024
- Bill shows you how to install a Set of Eibach Pro-Kit Springs on your 2016-2018 Focus RS.
Enhance the handling and aesthetics of your Focus RS by lowering its height with this premium set of springs! Completely take out the chance of experiencing annoying body roll and harmful nose diving when you have to heavy brake. These top-of-the-line springs correctly lower the center of gravity upon your RS. With a 0.7” drop in the front and 1.1” drop in the rear, these springs enable speedier cornering and quicker stops. Further your 2016, 2017 or 2018 Focus RS with the commanding stance and shocking performance it deserves by transforming your ride with this superior set of pro-kit springs from Eibach.
Purchase Product Here:
www.cjponypart...
Check out more Focus RS Suspension parts from CJ's here:
www.cjponypart...
Check out more Eibach parts from CJ's here:
www.cjponypart...
Subscribe to CJ Pony Parts on UA-cam here:
www.youtube.com...
Dont even own a ford but like watching your stuff. keep it up
cleanest install vids
Thanks for this video guys just fitted the same springs today on my focus rs 👍👌
The ride is pretty harsh to begin with..did it make it much worse?
@@RB-ny5lh ride is less harsh I would say well worth it IMO also the car sits and and handles so much better 👍
@@p262shp tight. I've wanted to lower mine but didn't want to spend thousands to make it less rough. I appreciate the response
another great video Bill and Freddy.
BADD400 CB700 drums
BADD400 CB700 drums
its between these and mountune. I wish there was more info out there on these.
Just bought an RS that was originally from the east coast but is now here in California. I do not look forward to the battle of separating the front struts due to the surface rust.
More rs installs
Another nice vid. Thx
Great video, Uk subscriber.
Thank you!
25mm?
how long should take to do if you have a lift
Great video but I'd like to see you guys do a better job at not blocking the view of your work !!! besides that it's all good !!!
How is the Pogo effect with these springs. Does is get rid of the factory over dampened struts with to light of springs? Also will you be carry any sway bars in the future? Thanks
Should have showed the size difference of the springs.
I didn't see bushings getting clocked after the spring install, is that not required?
Is wheel alignment needed after installation?
Yes I would recommend an alignment.
I like it but I want a softer spring the ride on my bumpy roads are horrible even in normal
kyle Costa
Go Whiteline lol. 2 years later :P.
Have any of you found a decent spring that doesn't make it more harsh?
Where is Ur Location
While I like the new look. Not sure I can live with it being in "stiff" mode alllllll the time. How bad is the ride after the install? Or is that why you didn't give it a review? Loved the springs I purchased from you guys for my ST. I'm just nervous about that horrible RS ride quality.
I didn't review it because I had to leave for SEMA but the ride was not harsh at all. The RS is stiff to begin with and I didn''t feel the Eibach springs are any worse.
Donnie Burke if you're worried about that get the mountune springs. Gets rid of the pogo too!
You get used with, it's only that gives you a feeling of mercy when you hit a hole or go ever akward speed bumps
Was an alignment needed after this install?
Anytime you change ride height you should get an alignment.
Attention!!! On the right are the Sensors of the xenon light!!! Please Show this the community! You have to pay 250€ for one!
Thorsten Boll u77
what brand is that spring compressor? pretty neat tool...
This is the exact one that we use, I highly recommend it. It's way easier and safer than the traditional ones you get from the auto parts store. amzn.to/2j1bmVE
OTC 6494 It's a lifesaver for sure!
Nice way to ruin a perfectly good car for some awesome 1 inch drop hahah have fun with the car now