Hiya Phil, awesome video and beautiful stones. And what you make with the stones are excellent mate. I hope you have a awesome blessed day mate. Cheers! Cya! 😺🐟 out!
Nice video. Ive been running my Wuttke Wheel lately. It works great, pretty amazing how much you can get done vs a dremel.. I still working on learning to be more patient before moving on to the next stage though. Thanks for the video.
G’day mate, I still get caught out, now and then, having to go back a grit or two. It can be hard, to adjust the eye, to look at the stones surface through all the interference of the reflection and play of colour. 🤪👍
Great video, Phil! I was expecting a lot of measuring, etc., but since you also make the settings, measurements are not that critical. Excellent polish job also! dp
Pity to see so much wastage of good colour but if need a calibrated stone for a setting it is the only way to go and often a matching set will sell for far more than a Freeform of triple the weight. Good job Phil, thumbs up as always.
G’day mate, that stone was poorly cut to start with and had a chip in the face, the stone was supplied and requested to be cut this way by the owner, I’ll be setting them soon. 🤪👍
Using speech to text sorry about any errors. As you probably know, I don't use a flat lap. Exactly. But my dreams has a blade on it, which does the same job and I swear by them. I think the flat lap type equipment is vastly superior to the other laboratory equipment because they do not give you a curved finish. Those other ones can really mess you up because it's very hard to get flat Stone out of It
That was a quick cut, lol... nice stones buddy hey, how come your stencil lines still had a ways to go but still fit in the stencil? When I use my fine point marker, I find I have to go to the outer edge of the line for a snug fit, it looked like you had a ways to go but not? Strange but not hehe
Wasn’t the founder of Wuttkewheel locked up for disclosing sensitive US secrets. He must have invented this wheel while in asylum in the Ecuadorian Embassy. I think his name is Julian something, he is an Aussie too.
Beautiful work and great results. I'm going to enjoy watching you set them too.
Lovely set.
Hiya Phil, awesome video and beautiful stones. And what you make with the stones are excellent mate.
I hope you have a awesome blessed day mate. Cheers! Cya!
😺🐟 out!
Absolutely gorgeous 😊 Well done 👌
Hello, beautiful stones, nice seth good job.
Beautiful.
Beautiful 🎉
Looking good
Nice Phil, it looks like you could make a nice Mickey Mouse pendant 😊. First thing I thought in the low light at the end. Thanks for sharing
🤣👍 I can’t unsee it now. 🎶M, I, C… K, E, Y… O, P, A, L, S,….
thanks for yours video
Just beaut mate!
nice set of stones mate
Gday Phill hope you are having a good weekend
G’day Kayne, every day is like the weekend here at The Opal Mills, not a work day in sight 🤣. I hope alls well your way. 🤪👍
Nice video. Ive been running my Wuttke Wheel lately. It works great, pretty amazing how much you can get done vs a dremel.. I still working on learning to be more patient before moving on to the next stage though. Thanks for the video.
G’day mate, I still get caught out, now and then, having to go back a grit or two. It can be hard, to adjust the eye, to look at the stones surface through all the interference of the reflection and play of colour. 🤪👍
Great video, Phil! I was expecting a lot of measuring, etc., but since you also make the settings, measurements are not that critical.
Excellent polish job also! dp
Good admin!
awesome results!
also awesome, three videos from opal creators I subscribe to, all in one day. and then there is my upcoming video.
Brava
So beautiful, 👋💎👍!
🤪👍
Pity to see so much wastage of good colour but if need a calibrated stone for a setting it is the only way to go and often a matching set will sell for far more than a Freeform of triple the weight. Good job Phil, thumbs up as always.
I can’t believe you cut that big nice stone. There hard to come by 😂
G’day mate, that stone was poorly cut to start with and had a chip in the face, the stone was supplied and requested to be cut this way by the owner, I’ll be setting them soon. 🤪👍
@@theopalmills well good job 👍
Using speech to text sorry about any errors.
As you probably know, I don't use a flat lap. Exactly. But my dreams has a blade on it, which does the same job and I swear by them. I think the flat lap type equipment is vastly superior to the other laboratory equipment because they do not give you a curved finish. Those other ones can really mess you up because it's very hard to get flat Stone out of It
That was a quick cut, lol... nice stones buddy hey, how come your stencil lines still had a ways to go but still fit in the stencil? When I use my fine point marker, I find I have to go to the outer edge of the line for a snug fit, it looked like you had a ways to go but not? Strange but not hehe
G’day mate, I didn’t use a fine point marker, so it inset the circle slightly, I just kept the spacing even and kept checking against the template. 🤪👍
Wasn’t the founder of Wuttkewheel locked up for disclosing sensitive US secrets. He must have invented this wheel while in asylum in the Ecuadorian Embassy. I think his name is Julian something, he is an Aussie too.
I’m thinking of cashing in on the reward for his capture. 🤣👍
👍
🍻
✌️🐝➕
HELLO BEING BETTER maybe i watch more but reality been very busyyyyyyyyyyyyyyyyy. See OpalAngel.