2017-2018 B46/B48 BMW 330i 430i 530i water pump replacement

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • This video shows step by step on how to replace your water pump on your BMW. I am personally working on a 2017 BMW 330i however this video can also be a guide for other vehicles with similar or the same engine such as the 430i and 530i.
    In the process of replacing the water pump, removed other parts such as the charge pipe, alternator and ac compressor so this can also guide you.
    If you have any questions or have any advice for me as a learner please feel free to let me know. Thank you.

КОМЕНТАРІ • 17

  • @Brian_2JZ
    @Brian_2JZ Рік тому +5

    The engine doesn’t sound healthy when you put it back together. Does it still make that sound ?

  • @Victorpt13
    @Victorpt13 Місяць тому

    Great video! question do you need to replace the thermostat as well, I have a small leak in my water pump, thinking of replacing the water pump only or should I also replace the thermostat as well?

  • @mordechaimaslaton5381
    @mordechaimaslaton5381 12 днів тому

    How'd you get the alternator back on its not going back on

  • @ghassanali8144
    @ghassanali8144 6 місяців тому

    Great video thanks for sharing, but you changed water pump with bracket was the bracket leaking as well? Removing only the pumo is much easier

  • @Schwerpunkt991
    @Schwerpunkt991 10 місяців тому

    Thank you for the video. Im a diy f30 owner as well but I haven’t had any water pump issues yet but now that I watched this I feel better prepared for the time when my water pump does fail. Even though I read the other comments I feel like I should still say that the sound of the engine at the end of the video sounds really wrong. Not like an internal motor problem, but like a water pump bearing or ac compressor bearing failure etc. Or a loose component that runs off the serpentine belt wiggling back and forth with the movement of the serpentine belt. Or maybe its running rough after plugging the throttle body/ air flow sensors back in?

    • @mikemata623
      @mikemata623 3 місяці тому

      that tensioning piece on the alternator needs to be adjusted after you take the belt off, notice how it was moving back and forth like you said

  • @atogondar2640
    @atogondar2640 9 місяців тому

    Great DIY. 👍

  • @Blue92chev
    @Blue92chev Місяць тому

    When I moved my ac compressor, I heard leaking?

  • @Schwerpunkt991
    @Schwerpunkt991 10 місяців тому

    You should remove the negative battery terminal before unplugging sensor connectors. It isnt 100% necessary but its just an additional level of caution. Depending on what type of repair you’re attempting, you could be in a situation where you could potentially short 12v into an unplugged cable.

  • @rezzyrepairs
    @rezzyrepairs  11 місяців тому

    It does sound different on video but the engine is still running good till this day

  • @bmwlane8834
    @bmwlane8834 7 місяців тому +1

    Are you sure you need to loosen the alternator To change the water pump ?

    • @bmwlane8834
      @bmwlane8834 7 місяців тому

      Edit.This B48-46 uses a different water pump than my B48.

    • @jubeljenz
      @jubeljenz 6 місяців тому

      I have the same noise what is it?

  • @JorgeArrieta-w6d
    @JorgeArrieta-w6d 10 місяців тому

    What is the first black block peace you remove

    • @PremosWorld
      @PremosWorld Місяць тому

      Thermostat housing is what I understand it to be

  • @AutorepairAuto
    @AutorepairAuto 18 днів тому

    All that extra work for nothing remove covers and take belt off remover pulley and 4 water pump bolts