94 to 95 Mustang GT Base Idle Reset

In this video, I complete a base idle reset on my 95 Mustang GT. I have several manuals with different instructions, but I have found these instructions to work the best. The instructions work on 94 to 95 Mustang GT’s only.

[@Goldpony95]

Thanks for all the videos on the 95 GT. I am going through everything and your how to videos are a HUGE help!

[@Lxmustang805]

Thanks for the how to , I did this on my 95 worked perfect 👍🏼 .

[@paulcomer2266]

You are not telling us what you are doing to lower the idle???

[@chasingmustangs]

There is a bleeder screw on the throttlebody, back out to increase rpms

[@incrediblej.9762]

Alright so mine is a supercharged cobra, tuned and all the jazz. Will this trick work for mine? (Idling high)

[@chasingmustangs]

If you have a stock computer with stock configuration, yes. If you have an eliminator chip, no. The company that provided the eliminator or replacement ECU should provide the base idle reset instructions.

[@sanchez8449]

I adjusted mine, but the lowest idle it would go to is 900, what could cause that?

[@chasingmustangs]

You need to adjust the throttle screw on the throttle body. There should be some blue paint on throttle screw that should guide you.

[@sanchez8449]

Thanks!​@chasingmustangs

[@ko5cobraa]

When I disconnected the IAC my engine won’t stay running long enough to adjust the tb.

[@chasingmustangs]

Back out the idle screw about two turns and then disconnect the IAC.

[@ko5cobraa]

Thank you so much for getting back to me, I will try it.

[@99yz]

did u connect the IAC valve back up while still running?

[@chasingmustangs]

Yes

[@donniecampbell3704]

Did you reconnect the IAC after the final computer reset? I didn't catch exactly when

[@richarddarnold5162]

When did you reconnect the iac

[@aidenschlupp1426]

quick question, at what point did you reconnect the IAC?

[@chasingmustangs]

After i was done adjusting the idle.

[@aidenschlupp1426]

@@chasingmustangsbefore or after disconnecting battery for 15 mins ?

[@chasingmustangs]

@@aidenschlupp1426 before

[@aidenschlupp1426]

@@chasingmustangs after trying that, still had idle hang wouldn’t drop to 750rpm. did a smoke test and smoke came out of the tps which i ordered but also out of the throttle body linkage. is that due to the tps or is smoke supposed to come out of the linkage?

[@chasingmustangs]

The TPS should not leak smoke. Is your throttle blade loose? Are you sure you are looking at tps and not idle air control valve?

[@VansenJenessa]

Rental? Where and how much. Lol

[@chasingmustangs]

Chasingmustangs.com

[@chasingmustangs]

Located in North Fort Worth

[@sethbeck9815]

@@chasingmustangs Woah I didn't realise you are local, I might have to stop by sometime and rent a car from you guys!