![Chasing Mustangs](/img/default-banner.jpg)
- 187
- 1 268 696
Chasing Mustangs
United States
Приєднався 23 лип 2017
I specialize on videos working on late model Rangers and Mustangs. The goal is to encourage people to work on their cars and not go broke restoring or fixing them.
What Makes a 2WD Ford Ranger Edge and Sport Special
In this video, I talk about what makes the 2WD Ford Ranger Edge and Sport different than other 2WD Ford Rangers.
Ranger Edge Years: 2001-2005
Ranger Sport Years: 2006-2009
Links of Sites I used for Information in the Video:
www.therangerstation.com/tech/ford-7-5-8-8-inch-axle-tag-door-codes/
www.therangerstation.com/tech/the-ford-ranger-front-suspension/
Ranger Edge Years: 2001-2005
Ranger Sport Years: 2006-2009
Links of Sites I used for Information in the Video:
www.therangerstation.com/tech/ford-7-5-8-8-inch-axle-tag-door-codes/
www.therangerstation.com/tech/the-ford-ranger-front-suspension/
Переглядів: 81
Відео
98 to 2011 Ford Ranger Rear Shock Replacement
Переглядів 3314 днів тому
In this video, I replace the rear shocks on a 2003 Ford Ranger Edge. Thess instructions will be similar on 98 to 2011 Rangers. Double check torque specs and part numbers, as they changed throughout the production span. 2003 Ford Ranger Edge Rear Shock: www.autozone.com/suspension-steering-tire-and-wheel/shock-strut/p/duralast-twintube-shock-absorber-ts34-32282b/69233_0_0
98 to 2011 Ford Ranger Tie Rod and Sway Bar End Link Replacement
Переглядів 2614 днів тому
In this video, I replace the Tie Rod and End Links on a 2003 Ford Ranger. I replaced the parts because the rubber bushings were coming apart. You will need to double check torque specks and part numbers, as they are different for different model years. Parts Used in Video for 2003 Ford Ranger: www.autozone.com/suspension-steering-tire-and-wheel/sway-bar-link/p/duralast-gold-sway-bar-link-gsl700...
Rare Mustangs at Mid America Ford Shelby Nationals 2024
Переглядів 7414 днів тому
In this video, I show the rare Mustangs at the 2024 Mid America Ford Shelby Nationals.
Ford Mustang Roush 427R on Route 66
Переглядів 6214 днів тому
In this video, we take video footage on Route 66 between Claremore and Oklahoma City with a 2008 Roush 427 R.
Most Popular Classic Mustang Rental
Переглядів 5321 день тому
In this video, I talk about our most popular classic Mustang rental.
90 to 95 Mustang Showing High Coolant Temperature
Переглядів 4221 день тому
I this video, I show the common problem with a non-Motorcraft temperature sender. I replaced the aftermarket part with a Motorcraft part and my problem was resolved. Part Used in the Video: www.americanmuscle.com/ford-temp-unit-9095.html?Interior - Switches|Ford&T5_Var4=52981&T5_Var2=shopping&AM Brands Medium LTVTop&intl=0&dialogtech=ppc&gad_source=1&gclid=CjwKCAjwydSzBhBOEiwAj0XN4K4GoB4iwyHBfa...
Amtrak Fort Worth Texas to Washington DC Trip
Переглядів 50821 день тому
In this short 10-minute video, I show highlights of our Amtrak trip from Fort Worth to DC. We traveled in a Roomette for both legs of the adventure. We traveled on the Texas Eagle and the Capital Limited.
Roush 427r at 2023 LMR Cruise In
Переглядів 6021 день тому
My wife took her 2008 427r to the LMR Cruise In event in 2023.
1998 to 2011 Ford Ranger Engine Options
Переглядів 8621 день тому
In this video, I talk about the engine options available in the Gen 3 Ford Ranger. I also talk about the engines I do and don’t recommend.
2001 to 2008 Ford Ranger 3.0 Vacuum Lines Explained
Переглядів 23021 день тому
In this video I explain the vacuum lines on two Ford Ranger 3.0 trucks. I explain them on a 2003 Ford Ranger Edge 3.0 and a 2008 Ford Ranger 3.0 XL Sport. I also talk about general troubleshooting.
Holley Sniper EFI Install Lessons Learned after Three Vehicles
Переглядів 18421 день тому
In this video, Dain and I talk about lessons learned from installing Holley Sniper EFI on three vehicles. Check out Dains Shop: www.theshopdiygarage.com Holley Sniper EFI 2 Barrel EFI Kit: www.holley.com/products/fuel_systems/fuel_injection/sniper_efi/sniper_1-_and_2-barrel_systems/sniper_efi_2300_2bbl/parts/550-850K Holley Sniper HyperSpark Kit: www.holley.com/products/fuel_systems/fuel_inject...
05 to 09 Mustang AC Fan only blows on High
Переглядів 672 місяці тому
In this video, I work on a 2008 Mustang with AC fan only blowing on high. I replace blower motor resistor to fix the problem. These instructions will work on all Mustangs between 2005 and 2009. Part Used in the Video: www.autozone.com/cooling-heating-and-climate-control/blower-motor-resistor/p/duralast-blower-motor-resistor-ja1499/200883_0_0?cmpid=LIA:US:EN:AD:NL:1000000:ACP:19488533489&&CATARG...
94 95 Mustang Tumbler Ignition Lock Replacement
Переглядів 1653 місяці тому
In this video, I replace the ignition tumbler\ignition key lock on a 95 Mustang GT. These instructions will work on 94 to 95 Mustangs. Part Used in the Video: www.autozone.com/interior/ignition-lock-cylinder/p/locksmart-ignition-lock-cylinder-lc14390/97690_0_0?searchText=ignition tumbler
1994 to 2004 Ford Mustang Convertible Door Insert Bezel Replacement
Переглядів 583 місяці тому
In this video, I replace the door bezel/insert on an SVT Terminator Mustang convertible. These instructions will work on all Mustangs convertibles from 1994 to 2004. Part Used in the Video: Black Insert: lmr.com/item/LRS-14527BR/94-04-mustang-convertible-door-panel-insert Red Insert: lmr.com/item/LRS-14528K/10th-Anniversary-Cobra-Door-Panel-Insert-Red-LH-Convertible
65 Mustang Finally Running After Two Years
Переглядів 1393 місяці тому
65 Mustang Finally Running After Two Years
83 Mustang in Cody Jinks Outlaws and Mustangs Video
Переглядів 2063 місяці тому
83 Mustang in Cody Jinks Outlaws and Mustangs Video
Foxbody Low Coolant Light (sensor, tank and pigtail replacement)
Переглядів 2864 місяці тому
Foxbody Low Coolant Light (sensor, tank and pigtail replacement)
94 to 2004 Mustang Ball Joint Nut Tightening
Переглядів 824 місяці тому
94 to 2004 Mustang Ball Joint Nut Tightening
Ford Ranger Not Filling up with Gas, Purge Valve Replacement
Переглядів 1,4 тис.4 місяці тому
Ford Ranger Not Filling up with Gas, Purge Valve Replacement
Ford 3G Alternator Not Charging 94-95 Mustang
Переглядів 7446 місяців тому
Ford 3G Alternator Not Charging 94-95 Mustang
Ford Superduty Van Truck Stuck in Park Interlock Solenoid Replacement
Переглядів 1677 місяців тому
Ford Superduty Van Truck Stuck in Park Interlock Solenoid Replacement
09 to 14 Ford F150 Master Cylinder and Brake Booster Replacement
Переглядів 6 тис.9 місяців тому
09 to 14 Ford F150 Master Cylinder and Brake Booster Replacement
94 95 Mustang Cluster Gauge sensor locations as well as other critical sensor sender locations
Переглядів 6619 місяців тому
94 95 Mustang Cluster Gauge sensor locations as well as other critical sensor sender locations
2008 2014 Ford E Series Sliding Door Stuck Open Fix
Переглядів 4849 місяців тому
2008 2014 Ford E Series Sliding Door Stuck Open Fix
05 to 09 Mustang Ignition Switch Replacement (car alarm issues)
Переглядів 5 тис.11 місяців тому
05 to 09 Mustang Ignition Switch Replacement (car alarm issues)
99 to 2011 Ford Ranger Corroded Battery Terminal Replacement
Переглядів 2,2 тис.Рік тому
99 to 2011 Ford Ranger Corroded Battery Terminal Replacement
94 to 98 Ford Mustang New Key Fob Pairing to Car
Переглядів 412Рік тому
94 to 98 Ford Mustang New Key Fob Pairing to Car
1983 Mustang GLX Very Slow 8th Mile Time
Переглядів 86Рік тому
1983 Mustang GLX Very Slow 8th Mile Time
Thank you this video helped me out a bunch
It not a BCM... its ccrm.. constant control relay module
Excellent video 📹!
Would have been a better video without the music. Anyone trying to watch a repair video due to having car problems most likely isn't in the mood for loud rock music.
@@HatterasJeepguy old video, I don't put music in the videos anymore.
What can break if you don't do the reset part by removing fuses 10 and 12?
You could brake the vent arm of the actuator you installed.
@@chasingmustangs Is that the arm of the actuator or the thing that plugs onto?
@@chasingmustangs How hard is that to fix if it happens?
@@green3488 it's not easy. Cramped space and hard to see what you are doing.
@green3488 The arm of the actuator connects to vent lever.
Damn, you're in a big rush!
Are replacement screws available.
@loisnemeth1728 no, you will have to go to a hardware store.
THE 60041 NUMBER DOESN'T WORK FOR ME THE DIVERTER SOLENOID HELP IF YOU CAN .I'M DOING THE SAME THING TO MY 92. WHAT SIZE HOSE'S ARE YOU USEING FOR THE VACUUM LINE'S? THANKS
You will need 3mm, 4mm and 8mm hoses. The alternate part number is this for the diverter. www.amazon.com/Evaporative-Compatible-Expedition-9L14-9H465-BA-6L3Z9H465A/dp/B08ZYV7RDG. You can buy this vacuum hose kit on ebay. www.ebay.com/itm/315340258971?epid=530103742&itmmeta=01J27Y309PFW5TP38R8A21251R&hash=item496bbe7e9b:g:ZEEAAOSwcMBmNOkf&itmprp=enc%3AAQAJAAAA8Eiag6L82p5djolcuDD8r5zr3YlY1aOMgxs47XSOP7%2BWdbsu6zFtIw7vxnpchPZuDC9LIoid%2FLbXKxgToW%2B0lWVtuI4zRXohnAzZEoAG3cEy%2B7x3Sfei7bu%2FDz2oBxIi4etZus7UULHc8jEszcHfovUINhoRlEIfVXLB9wWzVRBFbJJ5HZvwDEpe0Lh3IcYXeE3ncEEb0G%2B7ESeGXynUNYjSnhle%2FOxD5BHtor9DEAQUptK6BFXgZBrpNC4apkCviZQdWdPb7KXVCAVStnFBPk%2FaZv%2FaL%2BrBvUHwSqn7t3CfpHnzkg8Y%2B6oFxIyFN76GKg%3D%3D%7Ctkp%3ABk9SR4qFjP6RZA
Same sensor for both ?
@@thatslowgrom2335 unique sensor for each.
Good info.....but I think I'm gonna hurl from your hat cam....
How do you put a 91 fox body mustang into neutral
How do you put a 91 Ford mustang Fox body in the neutral
@@StevenGutierrez-y7w automatic or manual?
How do you put a 91 Ford mustang Fox body in the neutral
I have a 91 Fox body Ford mustang 4 cylinder I need to put it in neutral so I can tow it
The 2000 Ford Ranger Trailhead is the same thing, just the predecessor that became the Edge & then the Sport. And yes, power windows on the 2006-2011 models were an option. While still a great truck, I’m really not a fan of these trucks past 2003 though, they became extremely outdated afterwards. Ford really pushed it making these like this all the way up until 2011.
The sales numbers really showed the Ranger was getting old. After 2004, sales dropped drastically.
@@chasingmustangsYep, that’s right. If I was Ford I would’ve done an overhaul redesign inside & out right away after that if not before.
Thank you for making this video. It is very informative and detailed! I also love that you show with the camera the places you are talking about.
I made the video because I could not find any good sources when I was troubleshooting vacuum issues. Glad to help.
I just did this job actually the nuts are 18mm top and bottom. Don't round them out people. 😆
The edge motor mounts have different nut sizes. But thanks for pointing this out.
That is a nice looking Mustang!
Norm
Any 2.3L 4-cylinder for sale? Is the 2.3 available in 4x4?
I just bought a 2003 edge super cab. Looking for vinyl seats. If anyone can help me out it would be most appreciated. Thanks.
May I ask why you put Automatic transmission fluid into the power steering pump instead of power steering fluid?
Many Ford vehicles actually call for ATF Fluid instead of regular power steering fluid. Important to check your vehicles manual.
@@chasingmustangs I have a 95 mustang GT as well that's why I'm asking, but I'll double check before I pour anything into it. Thank you much appreciated and happy late Father's Day 🫡
my xlt 2006 ford ranger doesn’t have power locks or windows on it
How has the car held up?
My daughter owned it for 6 years and then sold it.
So what is it?
Its a Mustang designed to compete with the Chrysler LeBaron in the early 80's.
Amtrak-worst rail system in the industrialized world. Slow, outdated and overpriced.
That didn't look like a roomette. It looked like you have a bathroom. I didn't think the roomette had a bathroom. Great Video otherwise! Thanks for sharing!
Dream Garage😊
I can't help but smile when I watch your videos
Bought a ranger with a bad engine. Got a 2002 taurus engine for really cheap, just to find out a couple of the cylinder bores are rusty due to a blown head gasket 😒 currently at the machine shop. Decked and bored 20 over. Cant wait to get this thing running its been sitting in my garage all year
I just got done with getting my 2003 Ranger going. Its been out of commission 2 years. More to come.
I found some issues while researching your UA-cam channel and videos, due to which you are not getting the desired video views and subscribers. I can show you the issues if you want.
Dude my distributor is stuck I can’t remove it any idea how to remove it
More than likely you have a distributor that has the wrong gear material for your camshaft. I have never seen this and the only recommendation I have is to rotate the engine and keep trying.
What what’s the part number for the fuel filter on the flex fuel I have a very hard time finding one
www.autozone.com/filters-and-pcv/fuel-filter/p/duralast-fuel-filter-ff782dl/366586_0_0?searchText=fuel+filter
Do you need a fuse for the yellow wire if you run it straight to the battery? If so what size amp fuse?
You don't need the fuse.
Do not like this engine, I always thought it was really gutless & junky. It literally has the power of a 4 cylinder with the fuel economy of a V8, one of the Duratec engines would’ve been great in these.
It was an engine pushed beyond its years.
@@chasingmustangs No doubt about it, I think it lasted from like the mid 80’s until 2008 or so. But like I said they should’ve replaced it with something like the 3.0 Duratec that the Escape had which was a peppy little engine or they should’ve updated it like they did the 2.3 & 4.0.
Did you get rid of those parts ?
Yes, a long time ago.
i was looking for silver and found gold with this video.
The XL did come with a cruise control option, there was a Sport that had power options too. The Edge eventually became the Sport, exact same thing in a different name. I’m not a fan of the junky 3.0L either, give me the 2.3, 2.5 & 4.0 all day. These should’ve had the 3.0 Duratec in them instead. Also, power windows didn’t become standard in XLT’s until 2009, plus the window switches going bad in them is no worse than any other vehicle that has them too.
What is with the crappy music track!!!! For f's sake bro, you are one serious timewaster, god help anyone who has to work with you
On my 2011 ford f150 I used a refurbished one from auto zone and the 2 bottom nuts do not tighten all the way up , the top 2 did , brake booster
Did you have the spacer I showed on the video?
No it didn't come with it and the one that came off did not have it but this is a 2011 dose it need it or can I use washers on bottom bolts
@@CharlesMattox-pr6su According to parts list the spacer is needed on 2010 to 2014 trucks. You will know if you need the spacer, as the brake peddle will stick out about 1 foot above the gas peddle. The gas and brake should be at the same position.
Didnt even see where he changed anything
Blah blah blah, do you have to!!!!!! Stay Focused Bro!!!!
The center bolt is suppose to be loose that you can take it off by hand. Even when you tighten it, as soon as you hit the road it loosens by itself.. I know, scary but they always do that....
how were u able to get the line all the way through i push mine through and it goes all the way but on the other end nothing comes out?
You might have to use a coat hanger to push or pull it through. Its not easy.
This should be a video on how not to change cylinders and lines on these cars. 🤦♂️ you’re not suppose to removed those brackets and all those bolts cause now you just lost all your alignment to the front windshield. All you had to do was put the top up and you can access the cylinders on both sides and the lines are also accessible on both sides and under the top well. Lots of extra work that wasent needed crazy.
Have a better video to many moving no a stable 👎
It will actually get better mileage. You probably just didn’t notice how much more you actually were on the gas after putting this lol
What’s the size of the bleeder on thermostat housing. I can’t seem to find the right sized one, used hex and everything was bigger or too small.
T50 torx bit
Just had mine start leaking. It was a high flow pump. It had been on the car @220,000 miles. It was a good one.
The OP didn't explain how to set the voltage on the TPS sensor with a volt meter. Most times you'll have to modify the bolt holes in the TPS to achieve KOEO voltage between 0.79V and 0.98V