Best Way To Repair Broken Plastic: Repairing Plastic Car Bumpers
Вставка
- Опубліковано 4 січ 2025
- Hello everyone! You are watching video "Best Way To Repair Broken Plastic: Repairing Plastic Car Bumpers"
Welcome to Gaus DIY channel, this video is about Plastic Bumper Repair, that with the plastic welding method combined with baking soda and super glue, I believe this is one of the options to repair plastic effectively and fastest today.
You can apply it at home to repair scratches or holes in car bumper.
Tips:
How to repair broken plastic
How to fix broken plastic
How to Repair Plastic Car Bumpers
Repair Car Bumper
I hope you enjoy watching my video!
► Subscribe: youtube.com/@GausDIY?s...
On Gaus DIY channel, you can learn various inventions, tips, science projects, crafts idea and DIYs teaching how to reuse or recycle.
© Copyright by Gaus DIY ☞ Do not Reup
#plasticwelding #diyprojects #plastic #tips #diy
Excelente!!! Me suscribo, abrazo desde Argentina!! 🙌🙌👌👌👌
Muchas gracias
Thank you for all these great tips. Keep these ideas coming. Great video.
Thank you!
Nice idea ❤🎉🎉
Thank you, ✌️✌️✌️✌️🇺🇸🇺🇸🇺🇸
It looks like you are doing this for the first time!
I started this job a few months ago, but I'm still not used to working in front of the camera. Please gimme your feedback, it helps me develop yourself. Thank you!
Faltou umas lixas mais finas pra dar um melhor acabamento, mas muito bom resultado
Muito obrigado ❤️❤️❤️❤️
Good video I liked you don't cut it too much, it made it believable
you are doing v good job, in short time your channel growing fast. keep uploading the content
Thank you! Good luck to you! 🤞🤞🤞🤞
Thanks mate @@GausDIY
I love the soundtrack - who is it? Does it have a name?
It's name is: A trip around the Moon, Alaska Sky, Jah Jah Bangs. Thank You!
That is a great idea exactly what I was looking for! Thank you
Thank you, I'm glad the video was useful to you
If you solder before putting the aluminum tape on the opposite side, you'll have a much easier time peeling off the tape.
Thank you for your comment, I will take note of that
Fatto grazie
thank you
My repairs start out the same; I put the duct tape over the hole, but that's where I stop.
Seriously, though, the cyanoacrylate (super glue) plus baking soda comes out hard as a rock so you absolutely need a sanding block like shown in the video, if you try to sand it with just a piece of sandpaper in your hand, you will sand away all the original soft bumper plastic around the hole and leave the new patch sticking out. Believe me, I found out.
Attach sandpaper to a flat wooden surface, this can help the surface more flat and evenly. Use 100 sandpaper for rough , and 400-800 sandpaper for finishing surface. This method will help you fix that. Or if you have a sander, use it to save time. Thank You So Much!
Should have filled hole with abs or pvc plug first.
Can we use white cement instead of baking soda?
I tested and found that: baking soda is better and cleaner than white cement. Thank you.
Baking soda is available at almost any food store or supermarket and is cheap, why even ask?
The cyanoacrylate (Super Glue) is way more expensive
Maybe he has cement at home, or he can't find baking soda near him@@1crazypj
Cigarette ash was the original way of doing this .
Most fine neutral ish ph powders should work .
Snowcrete and super glue hmmm 🤔
Dunno I'm not a chemist but maybe not😂😂
How come you didn't do the same to the backside?
because I think it's not necessary
Thanks for the video but a nice time-lapse so we don't have to watch the same melting portion over and over again would be nice.
Thank you for you comment!
What is name white powder
It's baking soda
자막이라도 좀 넣어주시면 좋겠네요.
설정에서 자막을 켜실 수 있습니다
How many Watts (W) is your soldering iron?
I have one of 30W and there is no way to fit 6mm (1/4") tube in it as the hole is only 0.175" diameter.
One eighth inch is 0.125" and three sixteenths 0.187"
You could also look at part and find out what type of plastic you have (all newer parts will have it somewhere for recycling purposes), then use the same stuff to fill or reinforce the repair
I use 3 types including: 40W (diameter: 4mm), 60W (diameter: 6mm) and 100W (diameter: 8.2mm).
I work for a Garage, so I have all kinds of plastic available.
Thank you so much! 🤞🤞🤞🤞
@@GausDIY I'll have to get a cheap 60w, will make life a lot easier
Can you patch a air hose mine has a little slit in tried raping it with small wire and put silicone on it it worked for a little while but it developed a little hole it started making a popping sound I looked at it was like tiny balloons
If you fail to do it, use specialized hole patching materials for it. You can learn more about it on the internet before doing it, it will be more effective
Which liquid you drop on white soda powder. Why hiding its name?
I wrote in the subtitle, it is super glue, I don't want to reveal its brand, because the audience may misunderstand that I am advertising that brand. Thank you so much!
La polvere che avete messo cos'è
baking soda powder
use sand paper 2500
Thank you for your suggestion, I will try with it
✌️✌️✌️✌️✌️
Il liquido cos'è
Atak?
è una colla super
Everyone listening at the shop thinks im watching porn
De autos
Hope video is useful to you, thank you
Dónde conseguir ese super pegamento. La resina y endurecedor lo desconozco.
lo compro en el supermercado
تخسر عليها مليون
Well, It is a way for you to repair broken plastic parts, helping you save money and reduce waste into the environment. Thank you!
What can i use if I'm out of cocaine, though?
You can use: baking soda, cement, Charcoal, etc
Si hai fatto un vero e proprio schifo 😂😂😂
Thank you, I think you will be more skillful in repairing plastic than me, so Gaus DIY channel's videos are of new ideas and implementtation steps. so remember to use it to repair plastic items in your home. 💕💕💕✌😁😁😁😁
hope you wore a mask, that shit is really bad for your lungs.
Todo bien pero no sabes hacer un corcho para pulir 😂😂
¿Puedes mostrarme un ejemplo?
Ипать, у тебя талант!
Спасибо за комплимент
ㅋㄱ 쓰바 새로 가는게 빠르겠다
공돌이나 가능
장비에 재료에 에휴
감사합니다. 영상이 도움이 되었기를 바랍니다.