Hw info will show your actual CL times and you will see its act set to CL 24 or 22 cuz it's a jedec Mb and have to use same settings As a custom profile and it will how as advertised CL16
bro mine doesn't have the advanced option, i had to do a fresh install a few months ago and it seems to have gotten rid of this on the bios, any ideas what I need to do?
Be careful with that, i tried that in my 25l and won't boot after, i had to remove the cmos battery for reset the bios, so be careful, it's not compatible with all the omen 25l
i did excatly like this but got beep sound after rebooting than i had to remove my 2 ram on slot 1 and 3 and keep slot 2 and 4. I wanted to upgrade from 2 sticks to 4x8gb
just make sure all the rams are the same brand and same speed. For example if you buy 4 rams and they are all 3200hz, none can be under or over. So for me, I bought 8x4 3200mhz. All are 3200 mhz. If one of them are 3600 mhz, it wont boot the PC.
I did this but I couldn't change anything on the xmp profile and so I made a custom one and it booted up but said it had to restart and reset settings, can I do something about it?
I changed to custom and selected the highest possible option. Now my computer is restarting. It keeps restarting and I don't know what to do. Neither the keyboard nor the mouse is lighting up. It's just a black screen. What should I do?
I believe this happened to me once. The ram was the issue (don't remember what kind it was but I returned it). What ram did you get? Make sure they are both the same ones, or if you have 4, all the same brand with same MHZ.
Hey man so how do I update it and put the f20 in files I got ryzen 7 5800 but I’m still on f12 version when I go into the setting it says there no file but I can add to the bios in files
i did this because the stock ram is 3200mhz for me and i put the dram frequency to 2400 and now i have the same problem everytime i go to start it up it just beeps and turns off i didn’t know what to do i am gonna be killed
@@noahdazey you have to reset your bios too stock settings this guy did this but everyone is having problems with it there's a download for this that overclocks it for you from HP Omen site that'll do the overclock for you and none of this happening but please don't be scared you'll have to hard reset your BIOS by taking out the CMOS battery and using something none conductive like a metal screw driver and touch the pins together for at least 10 to 20 seconds I had to do this three times before it finally fixed and stopped black screening and worked fine after hard bios reset
NEED HELP!! My pc is Omen Hp 25L My specs are CPU AMD Ryzen 7 5700x GPU RTX 3070 RAM 8GB 3200MHz 2x so 16GB Today I added extra ram up to 32GB now But I saw at taskmaneger that it was on 2400Mhz So I did exactly what you did except profile 1 and 2 would go to 1600MHz so I went to back default and then custom. Left everything as it was on default and it was on automatic except the ram frequency I changed it into 3200Mhz And after that exit safe and restart. After that my pc doesn’t connect. At my monitor it says no signal and the keyboard isn’t working. I tried everything changed ram sticks removed the cmos battery and put it back after few mins and still the same issue what most I do. After that I regret doing what you did at XMP. Pls help
@@kaysup2350 my ram sticks are almost the brand have 2 hyperx and 2 fury beast. Same GB same Speed. At first I added extra ram and it worked. So I was excited to check it out in the task manager and saw 32GB but then I noticed the ram speed was at 2400MHz. I don’t understand what you mean about the motherboard Herts
Hi guys I really need help so I did this on my omen 25l and now I turn it on but there is no display and my keyboard and mouse don’t turn on either but my speakers that are plugged into my pc do turn on I already removed the cmos battery and put it back in after 10 minutes and the problem is still happening. Everything in my pc turns on like my fans and ram rgb just no display of keyboard or mouse
Mine did the same I had to reset my bios by using a screw driver something metal too touch the two pins together it clears and resets the settings for bios you'll have to remove the CMOS before attempting this or you'll likely fry something UA-cam resetting bios I had to to do it like 3 times before black screen stopped happening and let me back into my game I never messed with my bios again though
So this fix to this is 1. Shut off computer with power button. 2. Unplug computer wait 5 seconds 3. Press and hold the power button for 30 seconds 4. Plug back in 5. While off press and hold Windows key and B 6. At the same time release the windows B key and power button after 1 second.
Got to your setting then advanced windows update settings one of the updates recommended should say hp something and that will be the bios update If you can’t find options that were mentioned in the video
Hi i have omen 25l and recently purchased corssair rams 2x16 3200 mhz and its like for everyone stuck at stock speed of 2133 in bios i dont have advence tab to configure ram i tried every tips and tricks but dont work
@@thelostadventurer3872 ooo never mind lol I remember the video now 😂, I had a issue where my mother board was giving off a beep sequence and was broken and not working I swapped cpus and it fixed it lol. That this was a different vid
So I got new ram and I decided to change the speed to 3200mhz but now it’s turning on but it seem like windows is booting up. The screen doesn’t turn on for whatever reason. Does anyone know what to do? My monitor would automatically detect my computer but that’s not happening
You need to remove the rams you installed, reboot and change your xmp to default, then reinstall your new ram and after you can adjust the clockspeed. Note that if it is not HP ram, it wont work with xmp as they need to be HP Certified rams. Kinda boring way to force you to buy OE parts.
When I do this and it reboots, pc doesn’t turn on and just beeps a few times before shutting down. It only turns on again if I go into bios and revert the changes. Tf?
@@kaysup2350 the stock one that came with the pc, I haven’t changed anything. I booted it up to 3200. The pc is : HP OMEN 30L GT13-0630nd i7-10700K RTX3080 Desktop Gaming PC
@@ardiannuhiji2543 that should be able to run it easily. That's weird. Going to think of a solution. If you figure it out please let me know for future users
@@kaysup2350 thanks! If you figure it out I would really appreciate it, I’ve tried something like this before I remember and back then I had the same issue. Haven’t been able to figure it out so far
well the stock ram they put it at 2133 mhz if I recall. I bought custom rams and now they run at 3200MHZ. I noticed it was reset to 2666mhz but all you have to do is enter bios and change it.
Mine 3200 mhz g.skrillz wont boot with xmp , once somehow i got 1600 in dram.f and had them run 3200 in cpzu , but after updatei have same problem 3200 mhz in xmp1 profil dont work for me and cant chanage t0 1600 , omen is shit
mine won't boot either. I even reset the whole system and now its fucked because every time it restarts it goes on and off a few times then beeps until I unplug it. SO NOW MY 1400$ OMEN 25L WONT WORK
@@TuffSKB dam, this is going to suck but I think you made the mistake I made when I first got my pc. Did you buy a ram off amazon on not the one from HP'S SITE? (They look exactly the same but the internals are different). Just save the 16gb ram that came with the PC on the side and buy 8x4 32gb ram sticks. Watch the video below and tell me if that's the mistake you made. ua-cam.com/video/Hks9VcLkLTM/v-deo.html
If your pc ram is running a lower speed then advertised then divide the speed by 2 and set that in the bios
Thanks for the help i got more ram today and couldn’t figure out why it wanted me to change something in my bios
I have an 880-177nf and when i do F10 at start, this open me a old bios without xmp option
Mine has xmp profile 1 but it doesn't let me change it
If you get a blue screen. Click troubleshoot, then UEFI firmware. Then restart. It will then open up this utility.
I recently changed my SSD to a 1tb , and it gives me a boot order fail. anything you can help??
That’s different
Those trying to access the utility spam f1 if it takes you to system information every time just spam esc that’s what worked for me
sorry no press enter not esc
@@FATplopdon't work
@@Hurt4you do f11
I have the 2080 i9 n I'm only getting the Utility screen with Main,Security,Config, and Boot options. I'm trying to chang my fan speed
Same bro
You gotta change fan speed in the omen gaming hub
Hw info will show your actual CL times and you will see its act set to CL 24 or 22 cuz it's a jedec Mb and have to use same settings
As a custom profile and it will how as advertised CL16
Any idea if this works with hp omen 17 laptop?
How to i Get the advanec tab i dont have it
When i go to xmp profile 1 it doesn't let me change anything. Need some help
bro mine doesn't have the advanced option, i had to do a fresh install a few months ago and it seems to have gotten rid of this on the bios, any ideas what I need to do?
No, they added these features (including extrem mode) in the latest bios update
@@TheWishin how do I install the new bios
@@TheWishindo u know how to install the latest bios
Also mine says Mhz is 1600 for xmp witch puts it In dual channel to 3200mhz. (2x)
Be careful with that, i tried that in my 25l and won't boot after, i had to remove the cmos battery for reset the bios, so be careful, it's not compatible with all the omen 25l
or if you got a ryzen cpu just change it in ryzen master
Thank you
Bro there’s no advance option for me I got the 30L
same bro
i got the 30L too and i got the advance option :((
i did excatly like this but got beep sound after rebooting than i had to remove my 2 ram on slot 1 and 3 and keep slot 2 and 4. I wanted to upgrade from 2 sticks to 4x8gb
just make sure all the rams are the same brand and same speed. For example if you buy 4 rams and they are all 3200hz, none can be under or over. So for me, I bought 8x4 3200mhz. All are 3200 mhz. If one of them are 3600 mhz, it wont boot the PC.
@@kaysup2350doesn’t work for me?
I have HP Omen PC 15L, is there a way to access XMP ? I tried everything.
same pc new ram but i cant change the ram mhz theres no option in the bios i guess were fucked😭
@@unknown-jd2trare you using intel or AMD?
Intel
I did this but I couldn't change anything on the xmp profile and so I made a custom one and it booted up but said it had to restart and reset settings, can I do something about it?
I have the ryzen75800xrtx3060ti
I changed to custom and selected the highest possible option. Now my computer is restarting. It keeps restarting and I don't know what to do. Neither the keyboard nor the mouse is lighting up. It's just a black screen. What should I do?
your ram might be too high for the motherboard. What ram speed did you get?
i’m going to get the newest hp 40l is it a w buy
When I tried this my pc started beeping and i had to shut it back off and on again then the ram speed was 2133 again instead of 3200
I believe this happened to me once. The ram was the issue (don't remember what kind it was but I returned it). What ram did you get? Make sure they are both the same ones, or if you have 4, all the same brand with same MHZ.
Even when I put f10 I still see no advanced option
Use Ryzen Master if your using amd ram speed will stay unlike Xmp1
@@kaysup2350how do I get the advanced tab I don't have it BTW I have the omen 15 laptop
Same pc
Hey man so how do I update it and put the f20 in files I got ryzen 7 5800 but I’m still on f12 version when I go into the setting it says there no file but I can add to the bios in files
i did this because the stock ram is 3200mhz for me and i put the dram frequency to 2400 and now i have the same problem everytime i go to start it up it just beeps and turns off i didn’t know what to do i am gonna be killed
@@noahdazey you have to reset your bios too stock settings this guy did this but everyone is having problems with it there's a download for this that overclocks it for you from HP Omen site that'll do the overclock for you and none of this happening but please don't be scared you'll have to hard reset your BIOS by taking out the CMOS battery and using something none conductive like a metal screw driver and touch the pins together for at least 10 to 20 seconds I had to do this three times before it finally fixed and stopped black screening and worked fine after hard bios reset
how do i change it when I have a tkl keyboard
How to access hp omen 15 advanced bios option
F10
How do you go to the advanced one
NEED HELP!!
My pc is Omen Hp 25L
My specs are
CPU AMD Ryzen 7 5700x
GPU RTX 3070
RAM 8GB 3200MHz 2x so 16GB
Today I added extra ram up to 32GB now
But I saw at taskmaneger that it was on 2400Mhz
So I did exactly what you did except profile 1 and 2 would go to 1600MHz so I went to back default and then custom.
Left everything as it was on default and it was on automatic except the ram frequency I changed it into 3200Mhz
And after that exit safe and restart.
After that my pc doesn’t connect.
At my monitor it says no signal and the keyboard isn’t working. I tried everything changed ram sticks removed the cmos battery and put it back after few mins and still the same issue what most I do.
After that I regret doing what you did at XMP.
Pls help
Those ram sticks? are they all the same brand? and can your motherboard run the extra hertz?
@@kaysup2350 my ram sticks are almost the brand have 2 hyperx and 2 fury beast.
Same GB same Speed.
At first I added extra ram and it worked.
So I was excited to check it out in the task manager and saw 32GB but then I noticed the ram speed was at 2400MHz.
I don’t understand what you mean about the motherboard Herts
Hi guys I really need help so I did this on my omen 25l and now I turn it on but there is no display and my keyboard and mouse don’t turn on either but my speakers that are plugged into my pc do turn on I already removed the cmos battery and put it back in after 10 minutes and the problem is still happening. Everything in my pc turns on like my fans and ram rgb just no display of keyboard or mouse
Mine did the same I had to reset my bios by using a screw driver something metal too touch the two pins together it clears and resets the settings for bios you'll have to remove the CMOS before attempting this or you'll likely fry something UA-cam resetting bios I had to to do it like 3 times before black screen stopped happening and let me back into my game I never messed with my bios again though
@@maggiehalvorson6695 oh wow that is good to know I just ordered a new motherboard tonight
So this fix to this is
1. Shut off computer with power button.
2. Unplug computer wait 5 seconds
3. Press and hold the power button for 30 seconds
4. Plug back in
5. While off press and hold Windows key and B
6. At the same time release the windows B key and power button after 1 second.
Advanced config no me sale ayuda!
FN1 ? wand what
I don’t even have that setting on my omen setup utility
Use Ryzen master instead of xmp if your using AMD Anyway that is
@@caraagraph1799wym?
What about intel ?
you need aftermarket ram
how do u use that @@caraagraph1799
i dont get the xmp profile up, got the 3080 i7 edition. allready updated to the latest bio also :/
Same. Did you ever figure it out?
@@band0x1337 nha i gave up xD have not tried since
@@zoepritz2429 What HP OMEN do you currently have?
@@band0x1337 what hp omen do you have?
Got to your setting then advanced windows update settings one of the updates recommended should say hp something and that will be the bios update
If you can’t find options that were mentioned in the video
Hi i have omen 25l and recently purchased corssair rams 2x16 3200 mhz and its like for everyone stuck at stock speed of 2133 in bios i dont have advence tab to configure ram i tried every tips and tricks but dont work
Same problem
@@dp-st9ts i have found solution
@@dp-st9ts ua-cam.com/users/shortsTK3rrHKf5Ug?feature=share this is only solution and it worked for me now ram is at full speed
Are you using intel or AMD Cpu ?
@@caraagraph1799 i know i am late but i have same problem using intel
I have a i9-9900k and 2080 super version of the omen I don’t have advanced
Same. Cant find a solution other than getting a new mother board
@@thelostadventurer3872 mine was my cpu I guess
@@thelostadventurer3872 ooo never mind lol I remember the video now 😂, I had a issue where my mother board was giving off a beep sequence and was broken and not working I swapped cpus and it fixed it lol. That this was a different vid
So I got new ram and I decided to change the speed to 3200mhz but now it’s turning on but it seem like windows is booting up. The screen doesn’t turn on for whatever reason. Does anyone know what to do? My monitor would automatically detect my computer but that’s not happening
Note that my keyboard and mouse isn’t turning on either and they are also plugged in
Oh and the ram was 4 sticks of Kingston renegades ddr4
You need to remove the rams you installed, reboot and change your xmp to default, then reinstall your new ram and after you can adjust the clockspeed. Note that if it is not HP ram, it wont work with xmp as they need to be HP Certified rams. Kinda boring way to force you to buy OE parts.
If you have it set to 3200mhz it will not work it need to be 1600mhz witch will put it in dual rank and then will be at 3200mhz
how i get the advanced?
A mi tampoco me sale ,sabes como?
When I do this and it reboots, pc doesn’t turn on and just beeps a few times before shutting down. It only turns on again if I go into bios and revert the changes. Tf?
Sometimes it can mean the motherboard isn't able to run that speed. How much MHZ did you boost it up too? Also, what motherboard do you have?
@@kaysup2350 the stock one that came with the pc, I haven’t changed anything. I booted it up to 3200. The pc is : HP OMEN 30L GT13-0630nd i7-10700K RTX3080 Desktop Gaming PC
@@ardiannuhiji2543 that should be able to run it easily. That's weird. Going to think of a solution. If you figure it out please let me know for future users
@@kaysup2350 thanks! If you figure it out I would really appreciate it, I’ve tried something like this before I remember and back then I had the same issue. Haven’t been able to figure it out so far
Hey
What is your ram speed supposed to be at?
well the stock ram they put it at 2133 mhz if I recall. I bought custom rams and now they run at 3200MHZ. I noticed it was reset to 2666mhz but all you have to do is enter bios and change it.
Mine 3200 mhz g.skrillz wont boot with xmp , once somehow i got 1600 in dram.f and had them run 3200 in cpzu , but after updatei have same problem 3200 mhz in xmp1 profil dont work for me and cant chanage t0 1600 , omen is shit
When I click f10 I just hear a beeping sound, how to fix please?
When that happens it means your pc cant run what you attached. Did you add rams with too much MHZ?
@@kaysup2350 It’s the 30l prebuilt
I upped my ram to 2600 and it was at like 2333 and my pc isn't booting up now 😒 🙃
I can help you with that.
mine won't boot either. I even reset the whole system and now its fucked because every time it restarts it goes on and off a few times then beeps until I unplug it. SO NOW MY 1400$ OMEN 25L WONT WORK
Advanced does not shiw
How do I get the advanced option?
F10
@@wenzyybeats9223 thats jus the bios menu shit not the actual tab that says advanced settings
@@unknown-jd2tr the advanced settings are
in the bios menu
@@wenzyybeats9223where??
I have same thing dont know
what do you mean by same thing? Are they resetting your ram speed?
Bro my screen went black and now it won't show anything
Me too, how do you fix it??
Take all but one stick out
I fucked my omen mobo when I changed the ram speed incorrectly
What's MOBO? motherboard?
@@kaysup2350 motherboard
why is it so laggy like my mouse will barely move
Too many programs
I’m not getting the advanced option when I get to BIOS. Only Main, Security, Configuration, and Boot options. Anyway you can help me?
Which HP omen do you have?
@@kaysup2350 30L, Ryzen 5 3600 with 1660 super
@@lilpaynedabest Dam, I think with the Ryzen 5 (I have intel cpu) the mother board is different and that's why we might have different bios settings.
@@lilpaynedabest bro what did you do? , same problem
@@jakyim4955 ya @pacootha6od same here i cant change when i open bios
It keeps resseting to 2666mhz
What ram do you have?
@@kaysup2350 hyper x fury
After I installed 16 more gigs it won’t go back to xmp
@@TuffSKB dam, this is going to suck but I think you made the mistake I made when I first got my pc. Did you buy a ram off amazon on not the one from HP'S SITE? (They look exactly the same but the internals are different). Just save the 16gb ram that came with the PC on the side and buy 8x4 32gb ram sticks. Watch the video below and tell me if that's the mistake you made.
ua-cam.com/video/Hks9VcLkLTM/v-deo.html