I have come around an issue after installing the kit. I can’t do autosprint anymore it seems like the left joystick never hits the outer threshold so i am always walking. Another issue is when I press K1 the light doesn’t flicker when testing even though it can be mapped. On the contrary k4 doesn’t want to be mapped. Please help me ! Update: So as I guessed, the left stick wasn't going to the max because when I put the board back it wasn't completely aligned. At first I thought it was because of the EVA tape, so I removed it and I put the rise circuit directly on the FPC (fixed it on the two pins). This still didn't fix my issue, so I ended up putting Eva tape on the inside of the back cover of the controller to put enough pressure on the board to be completely aligned. And now it works perfectly (the small issue I had with K4 is now fixed as well). I hope this will be helpful to someone out there :)
Had the exact same problem with the left analog stick and also noticed that my screenshot button didn't "click" anymore. As you said there wasn't enough pressure coming from the left side of the motherboard inside due to the tape added at 10:20. Your solution worked perfectly, so thanks for sharing. I spared the part where the main orange ribbon cable lies on the battery to not put any more pressure on it.
In case someone still needs help: Put the spare EVA Tapes and the one from your old backcase on the battery before you close the controller again, on the side where the new orange ribbon cable lies.
That's great! Where in the video is the tutorial for that? I have missed it somehow lol. You need to sodder it, but did you use any flux with the soddering tin? I guess it's not necessary for that small drop?
I need help, my controller no longer turns on, it only shows a yellow light when I connect it with a cable and it doesn't have the adhesive tape either
Highly recommended!!! Thanks to the installation video it was pretty easy and it works more than perfectly. Just love it! Have had it for a couple years for the PS4 controller, once used it's a must-have and this one is even better😍.
k3/4 and the remap button are not staying in place when I wanna attach it to the controller.... they just keep falling out, any ideas how to fix it? slowly getting frustrated
Hey @Craig’s Channel, appreciate the help, thank you. I’m about to order the BDM-030 kit and was wondering what was different about installing the 030 vs the 010/020? Any help would be greatly appreciated and thanks!
@@exmann03 with the newer version you don't have to remove the ribbon cables on the side, makes things a lot easier as loads of people on my channel where fitting the ribbons wrong. Have you got a 030 controller? Make sure to check you've got that model first in case you have a 020 👍
@@exmann03 you can check by the R2 and L2, probably the easiest way in future saves you opening it up 😄 Hope you have fun with the install and enjoy the kit 😎
They’ve changed how it fits in now (heard back from the seller). You just have to press the holes into the slots where you have added the new foam insert. That will keep it in place 👍
Great video, thank you! Let me post my feedback here. 1, I spent a good 10 minutes to put back the touchpad in its place. There is a small plastic hook I broke down intentionally, so It went back together easily. 2, The L3 & R3 FPC cable strip could have larger holes so it would be easier to solder onto the PCB. 3, When I placed the small sticky pad under the original FPC cable, it was impossible to put back the FPC cable to its plastic pins, so I skipped that. 4, The FPC cable that came with the kit hadn't the smaller sticky tape on it, so I place that too onto the plastic pins instead. Other than these, everything was fine and it works perfectly!
BDM-30 Rise install not working Hi, I am hoping some kind sould would be able to help me. I have installed the hair micro switch clicky triggers which works fine. However, today I have gone to install the Rise4 kit and ensure everything ia lined up and installed correctly but the front buttons no longer work on the controller and when I go to turn ps5 off the controller just turns it back on again. Any help please?
At 10:45* i dont think ur supposed to leave the existing foam tape installed. And perhaps remove it and install one of the new foam tapes. I put in the new foam tape on top of the existing and when I put my controller board back in the new ribbon broke on that side of the board. Sending mine in to get it replaced. Or skip the foam tape completely
All my lights flash correctly and the correct amount of times when entering settings mode and mapping mode and after map them but once I test it, none of the paddles or buttons are responsive after many times of mapping them, don't get why since I have no flashing light when I press k1 and setting, please help I'm lost
The K3 Button on the metal kit doesn’t work as it should. Tried everything, even with the little black square stickers. I don’t know what to do, it’s just not clicking. It only clicks if i touch the button at the top but it’s not the point where I push naturally.
Can de BDM-030 be install just like the 020 and 010 version without soldering?Cause I'm just wondering why every UA-cam video include the soldering part for the 030 version.
The touch on my remote does not work when I press it and it turns on and off only when it wants, after installing the kit, does anyone know what the problem is and how to solve it?
Got it to christmas wanted to built it. There was no glue. I tried to fix this and my controller broke, my mic and the feedback are broken and i cant build it like it was before. Now i dont have paddles and dont have a normal controller. Fortunately i have a second controller
Can someone please help me I have metal bdm 30 and my k1 button is not clicking meanwhile my k2 and everything else works fine. I can’t figure out why it won’t click and work since it’s metal and it’s not broke like a plastic one would be
Man, I really wanna try this out but so scared of this whole process. I really only want the L3 and R3 buttons on the paddles. I did change a joystick on one controller with hall effect by desoldering and soldering it off but this one sounds like it has a lot of steps.
I had the same problem turns out the orange cable disconnected from the paddle part, I was able to plug it back in without taking apart the whole thing.
The tutorial was perfect! Everything works like a charm. However, the start and share buttons are now a bit "sunken" into the controller. Are there any tips to fix this? Anybody else has experienced this?
Mais bouton x o triangle et carré ne marche plus et mais flèche aussi et ma manette ne fait que d’essayer de s’allumer, comme ci le bouton p était appuyer h24
Hello, I need a bit of help. What do you mean if you don’t need the touchpad or L3/R3 button you can remap them to the rear buttons? So if I don’t solder anything, will I still be able to use the touchpad and L3/R3 as well as remapping the rear buttons. I want to remap the rear buttons to be “x” and “o”?
Help please ! The bottom right ribbon i discovered whilst putting back together it had fallen out ! I was extremely careful and delicate throughout the whole process and its just gone. Is my controller completely broken now?
My FPC ribbon isn’t going inside of the back mother board all the way . Also one of the 2 little holes are torn on the FPC ribbon . Do I have to replace it ?
If your problem is getting the touchpad out or refitting it back in, just gotta force it bro. I had the same issue and used a bit more force than shown in the video with his twist technique and it came out. If your touchpad is stuck after putting it back together, then your best bet is to probably take it apart again and double check everything. Good luck mane
Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?
10:30 Apparently this is the part of the build that can cause this issue, from what someone told me on the subreddit. Had the same exact issue as you, after L3 to sprint back buttons won’t work for a few seconds. Super annoying problem in games like Destiny 2 where you are doing a lot of running and jumping. Anyways I never found a great solution that lasted more than a few months, but a temporary fix is opening the controller back up and making sure the FPC cable is fitted down over the piece of EVA tape you put in there. Problem is when you put the tape in there you have to stretch the FPC cable back over the little black spikes that stick up, doing that widens the holes in the FPC making it more likely to pop back up. Basically everytime you notice L3 preventing the back buttons from working the FPC cable prob moved. So you gotta go back in an reseat it. I’ve had times where the issue starts happening and I open the controller up but the FPC hasn’t moved. But when I put the controller all back together the problem goes away for another month or two. If you find a better fix please let me know, I fucking hate taking these controllers apart, it is not as easy as everyone makes it sound. I just built a new controller hoping to get away from this problem, if it starts happening again in the new one I’m giving up on this company for good.
@@rockybalboa6433 Thanks for your answer. So I haven't found a solution to the problem. I have now completely removed the Extrem Rate paddles and sent the controller to a small company who installed completely new and different paddles for me. Now everything is finally working again without any problems.
@stefansky5609 what company did you use for paddles? This issue is making it unusable for me, repeatedly dying in game due to a lack of connection and buttons just stop working
you think i could put the metal big paddles with the plastic small paddles? i imagine they would be more durable but the controller would weigh less than having it all metal. im also curious if they’re even interchangeable? thank you
For some reason my suspicion, will the PS5 DualSense controller still dock and charge on official PS5 charging dock? and after installing the eXtremeRate remap buttons. It doesn’t sit on the dock anymore😳😢
Just got mine 5 minutes ago from Amazon and got the correct one this time but the cable that goes on the board doesn’t have any adhesive to keep it on and neither did the one I bought prior which was the incorrect piece?
Hi, I have lately some issues with my remapkit. Somehow whenever I press L3 ( sometimes even when I move the stick around ) the signals from the pedals won't go trough for at least a second. I also noticed that the LED, while remapping, just shut off when I press or move the Left Stick. And the remapping get cancelled. Hopefully someone can help me 🤙
Hello, is there a way to make a video just for those of us that want the back buttons for "x and o" ? Theres so many steps to skip that I'm getting really confused and hesitant to purchase this. Thank you.
Hey could someone please resolve this issue for me, i had first installed the clicky hair trigger bdm 030 and now i installed this rise 4 remap kit plastic version, but it does not turn on i did not do any kind of soldering either, and now also my face buttons sometime don’t work in the game. Please help
Same with me! The BDM 030 now also has a new touchpad but the soldering point is in roughly the same place and there is actually hardly any difference. No idea if this is a Japanese version but having said that, it's easy to see which point is the right one
Please connect your controller with an PC and go to extremerate.com/pages/gamepadtester to check if any buttons registered constantly. If so, please re-align the main ribbon cable
Been a month with it and now my remote is completely fkddd completely in playable, won’t charge random buttons seem to be pressed can play any game, worked fine until out of no where
I installed the kit to my ps5 controller and it worked pretty good for a few weeks but now I press the button multiple times and nothing happens and it does this all the time I have my buttons mapped to o and x I also installed the clicky kit for my controller and that still works great but the paddles arent working and everytime i hold the button to remap the controller it works and the light turns on and it maps properly but the buttons themselves arent being responsive everytime I click it
As someone who did this along with the whole clicky kit I wanted to give a few things from my build that may or may not help someone else first off on mine the rise 4 absolutely would not work until I put the thick sponge on like it says in this video but the clicky kit video says not to use it mine NEEDED that thick sponge from this video to work also my up directional arrow would not work once I put it all togeather but as soon as I took the back off it was back to working as it should only solution I could find for that was to take all the extra sticky sponge pieces and stack them on top of each other and place them on the r1/r2 top corner of the battery out of the way of the rise ribbon cable I’ve literally spent 10+ hours trying different things and checking Reddit and these were only fixes I could come up with to reliably fix my issues all in all not a bad kit I had literally 0 experience doing this type of thing but got it working but if a dual sense edge is in your budget I would just go with that unless you need 4 back buttons instead of 2
Also make sure when the ribbon cable bends around the board to stick to the battery at the top by the usb-c port make sure it does not get pinched or a sharp bend in it there make sure it stays a smooth bend I ruined my first cable because it got pinched
Can someone please advise I followed all steps without soldering as I do not want to solder. I use X and O I notice that it’s very different from bdm 020 and 010 that we don’t need any additional ribbons ? As I have followed it the remap goes solid red and then when I do the configure paddle to X it flashes as if it’s done but actually hasn’t done anything
Please connect your controller with an PC and go to extremerate.com/pages/gamepadtester to check if any buttons registered constantly. If so, please re-align the main ribbon cable
sucessfully installed mine, here are my tips, becareful when unplugging the ribbon cables sometimes it would unplug on the other side of the cable. get the plastic version, its easier to install compared to the metal, i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. put the extra foam tape cut it in half then stack them together then stick it on top of the orange cable before closing the shell, this would add an extra pressure to make sure that the new ribbon cable makes solid contact to your controller. have fun
i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. Are you referring to 28:40 in the video, I was wondering how these would work/feel without the eva tape.
@@Aaron6791ae it would not work properly without eva tape, what i did was remove the eva tape and replaced it with the thin plastic tape that came with the kit, i wasnt sure what that was for but thats what i used for the k3 and k4, it worked perfectly without sticking the buttons and made it more snappier when pressing the buttons, probably because its plastic and its more harder than foam.
@@Aaron6791ae yeah used the plastic tape, its similar to the eva tape but its a bit thinner and its also pre-cut to small squares same as the eva tape,
@@LoadingWorks Oh ok I see what your using then not the foam squares, but the hard plastic squares referred to as "pc plates in the updated video 11:30. Under the controller mainboard to make the board more fixed. Unfortunately I only have 4 squares of that left so I won't be able to use that for the k3 and k4 buttons.
Could you make a video of how you would set this thing up bc I got confused when he was tvhanging the touchpad L3 & R3 cause I don’t need none of those just O and X
@brando vasquez You can remap O and X to the back buttons. Don't solder anything just make sure everything is plugged in like in the video. Skip the soldering part.
Extreame rate I have a question ,i did it on the bdm 20 model, the install, Was working fine for weeks until i dropped it on carpet, Now i cant remap my buttons anymore the red light beeps as normal, but all buttons are unassigned now k4 k5 ect Any idea what has gone wrong as i dont no how to remove the kit once assembled sure its a loose ribben but i dont no Ill some it up i can no longer remap buttons although light on back flickers like it should Any ideas 💡??
Why do i have to install the Eva tape? Cause at the Rise 4 kit for BDM 020 there was no eva and the Flex cable was connected right to the original connector not fixed at the plate. And is the eva tape part of the kit? Cause i need 2 new Contollers and want to install the Rise 4 kit on both!
I have come around an issue after installing the kit. I can’t do autosprint anymore it seems like the left joystick never hits the outer threshold so i am always walking. Another issue is when I press K1 the light doesn’t flicker when testing even though it can be mapped. On the contrary k4 doesn’t want to be mapped. Please help me !
Update: So as I guessed, the left stick wasn't going to the max because when I put the board back it wasn't completely aligned. At first I thought it was because of the EVA tape, so I removed it and I put the rise circuit directly on the FPC (fixed it on the two pins). This still didn't fix my issue, so I ended up putting Eva tape on the inside of the back cover of the controller to put enough pressure on the board to be completely aligned. And now it works perfectly (the small issue I had with K4 is now fixed as well). I hope this will be helpful to someone out there :)
Had the exact same problem with the left analog stick and also noticed that my screenshot button didn't "click" anymore. As you said there wasn't enough pressure coming from the left side of the motherboard inside due to the tape added at 10:20. Your solution worked perfectly, so thanks for sharing. I spared the part where the main orange ribbon cable lies on the battery to not put any more pressure on it.
Does the kit comes with that EVA tape? as I've ordered it and am a bit worried now
In case someone still needs help: Put the spare EVA Tapes and the one from your old backcase on the battery before you close the controller again, on the side where the new orange ribbon cable lies.
@@kiliancinematic496 on the Orange Cable ?
@@kiliancinematic496 Or only on the bettery?
I love the fact that Craig started to work on official ExtremeRate channel. Great work man! 🙌
I installed and connected the L3 R3 cable and it works perfectly, thank you.
That's great! Where in the video is the tutorial for that? I have missed it somehow lol. You need to sodder it, but did you use any flux with the soddering tin? I guess it's not necessary for that small drop?
I need help, my controller no longer turns on, it only shows a yellow light when I connect it with a cable and it doesn't have the adhesive tape either
Did you get it to work?
Same bro
@@christiand.5912 yes i didt i rot in ther discord
Followed the tutorial to a T and it worked like a charm! Amazing tutorial!
thanks craig really nice to see more commentary from you 🥰
Highly recommended!!! Thanks to the installation video it was pretty easy and it works more than perfectly. Just love it!
Have had it for a couple years for the PS4 controller, once used it's a must-have and this one is even better😍.
So i did the install and everything correctly and remap the buttons it flashes like its remapped but when i click the buttons they dont do anything 😢
Ummm... at 12:27 mine doesn't have the sticky part, and there was never a white piece of paper to peel off of it.
same
k3/4 and the remap button are not staying in place when I wanna attach it to the controller.... they just keep falling out, any ideas how to fix it? slowly getting frustrated
As always, if you're needing a helping hand I'm always here 😁
Craig is here!!
Hey @Craig’s Channel, appreciate the help, thank you. I’m about to order the BDM-030 kit and was wondering what was different about installing the 030 vs the 010/020? Any help would be greatly appreciated and thanks!
@@exmann03 with the newer version you don't have to remove the ribbon cables on the side, makes things a lot easier as loads of people on my channel where fitting the ribbons wrong.
Have you got a 030 controller? Make sure to check you've got that model first in case you have a 020 👍
@@CraigsChannel thanks for replying so quickly. Yes, it’s the 030 I opened it up already.
@@exmann03 you can check by the R2 and L2, probably the easiest way in future saves you opening it up 😄
Hope you have fun with the install and enjoy the kit 😎
My main cable doesn’t have the first sticky pad on it, so having trouble keeping it in place. Do I need a replacement or is there a way around this?
Same dude
They’ve changed how it fits in now (heard back from the seller). You just have to press the holes into the slots where you have added the new foam insert. That will keep it in place 👍
@@MrD4nj after days of not fiddling with it, I decided to try again today and I seated the ribbon JUST RIGHT and NOW it all works and I’m so happy😭😭😭
Congrats! Yeah I got mine working (second one I’ve had as my first dualsense got horrendous stick drift). Can’t play without back buttons now
Is there a video showing the rise kit and clicky trigger install together?
Like the play-by-play instruction of the teardown and fix up back together again.
Yeah bro 😄
You need to make another video completely ignoring the soldering parts. Please.
I agree 100%
Just skip them like it shows in the video. It’s pretty easy.
@@NotTooTypical that’s not how my brain works 🫠 I really need a separate video
@@NotTooTypical it was a lot easier to follow along when I got my kit tho 👍🏼
I was so confused at first too
Why isn't it working when I have the full clicky kit and this it keeps rapid blinking
Great video, thank you! Let me post my feedback here.
1, I spent a good 10 minutes to put back the touchpad in its place. There is a small plastic hook I broke down intentionally, so It went back together easily.
2, The L3 & R3 FPC cable strip could have larger holes so it would be easier to solder onto the PCB.
3, When I placed the small sticky pad under the original FPC cable, it was impossible to put back the FPC cable to its plastic pins, so I skipped that.
4, The FPC cable that came with the kit hadn't the smaller sticky tape on it, so I place that too onto the plastic pins instead.
Other than these, everything was fine and it works perfectly!
Do you guys make this product for model bdm-10
Hi, my controller is no longer turning on after adding the L3/R3 cable. It was working fine before with just the back buttons
Hello, I need help, I cut the wrong part in my quite and I would like a new piece for bdm 40 please
(i am french)
BDM-30 Rise install not working
Hi,
I am hoping some kind sould would be able to help me.
I have installed the hair micro switch clicky triggers which works fine.
However, today I have gone to install the Rise4 kit and ensure everything ia lined up and installed correctly but the front buttons no longer work on the controller and when I go to turn ps5 off the controller just turns it back on again. Any help please?
At 10:45* i dont think ur supposed to leave the existing foam tape installed. And perhaps remove it and install one of the new foam tapes. I put in the new foam tape on top of the existing and when I put my controller board back in the new ribbon broke on that side of the board. Sending mine in to get it replaced. Or skip the foam tape completely
All my lights flash correctly and the correct amount of times when entering settings mode and mapping mode and after map them but once I test it, none of the paddles or buttons are responsive after many times of mapping them, don't get why since I have no flashing light when I press k1 and setting, please help I'm lost
the little orange thing that i stick to the board diddnt have sticky tape on it so i cant stick it to the board what do i do?
Same idk how I’m supposed to make it stick
I just used a piece of the black tape that was included to stick it to the board.
The K3 Button on the metal kit doesn’t work as it should. Tried everything, even with the little black square stickers.
I don’t know what to do, it’s just not clicking.
It only clicks if i touch the button at the top but it’s not the point where I push naturally.
same idk what to do
@@z3mv I wrote the Support an Email. Now they will send me a new PCB board to try again.
I recommend to do the same.
Did you try it without the tape?
Videos are so helpful everytime! Will always come to Craig for my remapping needs!
5:35 i do have the BDM-040 controller, and for some reason, my board looks completely different than in the video :/
Yes! I've been waiting for this video since Sony decided to send me all three bdm 030
3! I can't even find one 😄
Can de BDM-030 be install just like the 020 and 010 version without soldering?Cause I'm just wondering why every UA-cam video include the soldering part for the 030 version.
Hey!
Everything worked out except of the „right arrow“ button. Can you help me? 😢
The touch on my remote does not work when I press it and it turns on and off only when it wants, after installing the kit, does anyone know what the problem is and how to solve it?
I use these buttons for jump and slide/crouch. Outside the game it works but when I play it doesn’t respond properly.. how can I fix that?
Got it to christmas wanted to built it. There was no glue. I tried to fix this and my controller broke, my mic and the feedback are broken and i cant build it like it was before. Now i dont have paddles and dont have a normal controller. Fortunately i have a second controller
Can someone please help me I have metal bdm 30 and my k1 button is not clicking meanwhile my k2 and everything else works fine. I can’t figure out why it won’t click and work since it’s metal and it’s not broke like a plastic one would be
Did you use the eva tape in the video at 28:40 or no?
Man, I really wanna try this out but so scared of this whole process. I really only want the L3 and R3 buttons on the paddles.
I did change a joystick on one controller with hall effect by desoldering and soldering it off but this one sounds like it has a lot of steps.
The light will be solid initially until i put on the back plate (k3 and k4) then it will flash rapidly.
Bro i cant get the k3 and k4 metal back plate to stay on does anyone else have this problem????
The back plate that has the K4 and K3 buttons keep popping off please help
.
my controller doesnt have the thing on side to plug in its from the ps slim dont know if its different
I did everything like in the video but the led indicator did not light up at all, why?
Same
I had the same problem turns out the orange cable disconnected from the paddle part, I was able to plug it back in without taking apart the whole thing.
My left/right arrow is now not working, also the paddles are not working. I did everything as shown in the video, can you please help me?
The tutorial was perfect! Everything works like a charm.
However, the start and share buttons are now a bit "sunken" into the controller. Are there any tips to fix this? Anybody else has experienced this?
The touchpad looks different in my version of the BDM030. Can’t figure out what is the soldering point.
Mais bouton x o triangle et carré ne marche plus et mais flèche aussi et ma manette ne fait que d’essayer de s’allumer, comme ci le bouton p était appuyer h24
I don't have Eva tape in the box and one of the buttons are wobbly, what do I do
Hello, I need a bit of help. What do you mean if you don’t need the touchpad or L3/R3 button you can remap them to the rear buttons?
So if I don’t solder anything, will I still be able to use the touchpad and L3/R3 as well as remapping the rear buttons. I want to remap the rear buttons to be “x” and “o”?
When I turn the paddle board on the light just flashes and turns back off again
Help please ! The bottom right ribbon i discovered whilst putting back together it had fallen out ! I was extremely careful and delicate throughout the whole process and its just gone. Is my controller completely broken now?
10:17 Am I right in thinking that if I don't want to do any solduring, I still have to remove the original FPC cable and put EVA tape under it?
Correct
mine blinks and shows as if everything was right but it doesn’t work
my cable doesn't align with the holes you can see at 12:10. Additionally I don't have a tesa-strip - how connect this cable now?
The holes aren’t aligning either, did you find the fix for this?
My FPC ribbon isn’t going inside of the back mother board all the way . Also one of the 2 little holes are torn on the FPC ribbon . Do I have to replace it ?
11:54 i dont have that to stick it into place
My circle and triangle don’t work and the led on the back pedal doesn’t work
Having trouble with a stuck touchpad, maybe some got the same problem and a solution..
If your problem is getting the touchpad out or refitting it back in, just gotta force it bro. I had the same issue and used a bit more force than shown in the video with his twist technique and it came out. If your touchpad is stuck after putting it back together, then your best bet is to probably take it apart again and double check everything. Good luck mane
@@thahrimdon thx for the help, I'll try my best.
Overall extremerate product's are really good, i like the company and there things they put on market
Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?
10:30
Apparently this is the part of the build that can cause this issue, from what someone told me on the subreddit. Had the same exact issue as you, after L3 to sprint back buttons won’t work for a few seconds. Super annoying problem in games like Destiny 2 where you are doing a lot of running and jumping.
Anyways I never found a great solution that lasted more than a few months, but a temporary fix is opening the controller back up and making sure the FPC cable is fitted down over the piece of EVA tape you put in there. Problem is when you put the tape in there you have to stretch the FPC cable back over the little black spikes that stick up, doing that widens the holes in the FPC making it more likely to pop back up.
Basically everytime you notice L3 preventing the back buttons from working the FPC cable prob moved. So you gotta go back in an reseat it. I’ve had times where the issue starts happening and I open the controller up but the FPC hasn’t moved. But when I put the controller all back together the problem goes away for another month or two.
If you find a better fix please let me know, I fucking hate taking these controllers apart, it is not as easy as everyone makes it sound. I just built a new controller hoping to get away from this problem, if it starts happening again in the new one I’m giving up on this company for good.
@@rockybalboa6433 Thanks for your answer. So I haven't found a solution to the problem. I have now completely removed the Extrem Rate paddles and sent the controller to a small company who installed completely new and different paddles for me. Now everything is finally working again without any problems.
@@rockybalboa6433thinking about buying this. Can I skip removing the fpc cable? Or is it required?
@stefansky5609 what company did you use for paddles? This issue is making it unusable for me, repeatedly dying in game due to a lack of connection and buttons just stop working
Mine didn’t come with adhesive on the orange thing😢
Great video, it works well! Thank You!
you think i could put the metal big paddles with the plastic small paddles? i imagine they would be more durable but the controller would weigh less than having it all metal. im also curious if they’re even interchangeable? thank you
would this still function without the EVA tape or is it important to have it?
Same question here m8
What if my controller doesn’t works after putting everything back together?
@dannyez13 did you find the problem or a workaround?
@@donserpico8244 yes I did thanks for the reply brother!
What’s the point of 10:18 ? Why did you add that sticky back foam piece?
In the updated video they have done away with this seems it was causing quite a few issues.
For some reason my suspicion, will the PS5 DualSense controller still dock and charge on official PS5 charging dock? and after installing the eXtremeRate remap buttons.
It doesn’t sit on the dock anymore😳😢
I have no light and can’t map anything please help me
My buttons works fine apart from the fact it doesn’t work when using analog sticks.
Like I can crouch when not moving but can’t slide when running
So if you skip the soldering parts, the those buttons no longer work? Or those buttons just can’t be remapped?
Just got mine 5 minutes ago from Amazon and got the correct one this time but the cable that goes on the board doesn’t have any adhesive to keep it on and neither did the one I bought prior which was the incorrect piece?
Hi, we have upgraded the kit, please watch this tutorial instead
ua-cam.com/video/P8UH64-h_5A/v-deo.html
It won’t even light up for me. Where did I go wrong
Enjoy to those with the bdm-30! One of my favorite mods
Glad that you like it bro!
@@ExtremeRate Hi, i lost my eva tape that comes with the kit but i can buy that from the local shop , so what thickness of it size etc ? Thanks
I only want my my 0 X my square and triangle what do I have to do then and also my 0x square and triangle won't work
if i only want x,o,square and triangle on my paddles whats the part i have to start watch im so confused?
Anybody elses paddles in back not fit well and keep unclipping when we screw them in the controller?
Can you make a video remapping X, O and the left and right dpad buttons, I don’t know where they are on my motherboard and I’m confused as
Ok...what's the fix if I get the flashing light??
Hi,
I have lately some issues with my remapkit. Somehow whenever I press L3 ( sometimes even when I move the stick around ) the signals from the pedals won't go trough for at least a second. I also noticed that the LED, while remapping, just shut off when I press or move the Left Stick. And the remapping get cancelled.
Hopefully someone can help me 🤙
Hello, is there a way to make a video just for those of us that want the back buttons for "x and o" ? Theres so many steps to skip that I'm getting really confused and hesitant to purchase this. Thank you.
Why is my L2 button not working after installing this (I’m not mapping buttons)
What to do If you installed it but the light doesnt turn on
Hey could someone please resolve this issue for me, i had first installed the clicky hair trigger bdm 030 and now i installed this rise 4 remap kit plastic version, but it does not turn on i did not do any kind of soldering either, and now also my face buttons sometime don’t work in the game. Please help
Hola, se me apaga el mando al conectar el flex izquierdo, el corto, en el modelo BDM-020. Alguna ayuda.
Installation was straight forward, thanks to this guide. The only thing is that the K1 press is way looser/easier than K2. Any solution for this?
where does it show how to remap square, X, triangle or circle?!?!
Hi, I just installed and everything works fine, but I couldn’t bind X button to any paddles, what should I do?
I didn’t get any sticky tape on my cable what do I do
What happens if I don’t do the touch pad L3 and R3 soldering part??
you can’t remap L3 R3 or touchpad
@@smokescreen4how about if ur on PC
nope. gotta solder @@KaifKhan-bk6bo
I have new type of touch pad board please help me
Same with me! The BDM 030 now also has a new touchpad but the soldering point is in roughly the same place and there is actually hardly any difference. No idea if this is a Japanese version but having said that, it's easy to see which point is the right one
Hi I did the self check mode everyrhing seemed to work fine but when I try and remap a button it just flashes quickly it doesn’t work
Please connect your controller with an PC and go to extremerate.com/pages/gamepadtester to check if any buttons registered constantly. If so, please re-align the main ribbon cable
Been a month with it and now my remote is completely fkddd completely in playable, won’t charge random buttons seem to be pressed can play any game, worked fine until out of no where
What do u do when your light flashes rapidly because it goes into remap mode but the buttons don’t work
Pcb is broken
I installed the kit to my ps5 controller and it worked pretty good for a few weeks but now I press the button multiple times and nothing happens and it does this all the time I have my buttons mapped to o and x I also installed the clicky kit for my controller and that still works great but the paddles arent working and everytime i hold the button to remap the controller it works and the light turns on and it maps properly but the buttons themselves arent being responsive everytime I click it
As someone who did this along with the whole clicky kit I wanted to give a few things from my build that may or may not help someone else first off on mine the rise 4 absolutely would not work until I put the thick sponge on like it says in this video but the clicky kit video says not to use it mine NEEDED that thick sponge from this video to work also my up directional arrow would not work once I put it all togeather but as soon as I took the back off it was back to working as it should only solution I could find for that was to take all the extra sticky sponge pieces and stack them on top of each other and place them on the r1/r2 top corner of the battery out of the way of the rise ribbon cable I’ve literally spent 10+ hours trying different things and checking Reddit and these were only fixes I could come up with to reliably fix my issues all in all not a bad kit I had literally 0 experience doing this type of thing but got it working but if a dual sense edge is in your budget I would just go with that unless you need 4 back buttons instead of 2
Also make sure when the ribbon cable bends around the board to stick to the battery at the top by the usb-c port make sure it does not get pinched or a sharp bend in it there make sure it stays a smooth bend I ruined my first cable because it got pinched
Which thick sponge? Because it also isn't working for me
So if we don't want to solder do we still have to put in the cable around 7:50?
Is there any tutorial on this product to map it to R1 and L1?
io non riesco a rimappare i tasti dietro... se tengo premuto il tasto centrale non succede nulla
When I try to remap it and press on the back button it flashes ten stops what should I do?
Can someone please advise I followed all steps without soldering as I do not want to solder. I use X and O I notice that it’s very different from bdm 020 and 010 that we don’t need any additional ribbons ? As I have followed it the remap goes solid red and then when I do the configure paddle to X it flashes as if it’s done but actually hasn’t done anything
Please connect your controller with an PC and go to extremerate.com/pages/gamepadtester to check if any buttons registered constantly. If so, please re-align the main ribbon cable
sucessfully installed mine, here are my tips, becareful when unplugging the ribbon cables sometimes it would unplug on the other side of the cable. get the plastic version, its easier to install compared to the metal, i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. put the extra foam tape cut it in half then stack them together then stick it on top of the orange cable before closing the shell, this would add an extra pressure to make sure that the new ribbon cable makes solid contact to your controller. have fun
i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. Are you referring to 28:40 in the video, I was wondering how these would work/feel without the eva tape.
@@Aaron6791ae it would not work properly without eva tape, what i did was remove the eva tape and replaced it with the thin plastic tape that came with the kit, i wasnt sure what that was for but thats what i used for the k3 and k4, it worked perfectly without sticking the buttons and made it more snappier when pressing the buttons, probably because its plastic and its more harder than foam.
@@LoadingWorks Thx I will use the tape then was worried that the tape would make them less responsive.
@@Aaron6791ae yeah used the plastic tape, its similar to the eva tape but its a bit thinner and its also pre-cut to small squares same as the eva tape,
@@LoadingWorks Oh ok I see what your using then not the foam squares, but the hard plastic squares referred to as "pc plates in the updated video 11:30. Under the controller mainboard to make the board more fixed. Unfortunately I only have 4 squares of that left so I won't be able to use that for the k3 and k4 buttons.
No soldering needed if all you want to do is jump or slide with the back buttons.
Could you make a video of how you would set this thing up bc I got confused when he was tvhanging the touchpad L3 & R3 cause I don’t need none of those just O and X
@brando vasquez You can remap O and X to the back buttons. Don't solder anything just make sure everything is plugged in like in the video. Skip the soldering part.
Extreame rate
I have a question ,i did it on the bdm 20 model, the install,
Was working fine for weeks until i dropped it on carpet,
Now i cant remap my buttons anymore the red light beeps as normal, but all buttons are unassigned now k4 k5 ect
Any idea what has gone wrong as i dont no how to remove the kit once assembled sure its a loose ribben but i dont no
Ill some it up i can no longer remap buttons although light on back flickers like it should
Any ideas 💡??
Why do i have to install the Eva tape? Cause at the Rise 4 kit for BDM 020 there was no eva and the Flex cable was connected right to the original connector not fixed at the plate. And is the eva tape part of the kit? Cause i need 2 new Contollers and want to install the Rise 4 kit on both!
Put mine together got a flasging red light gone throught it all numeorous time evething is in the right place any idea?