@@danimayb hello mate. Just voilimart 1500w motor. Dunno bout control box. But it def kicks arse. In fact I'm having to go shopping morra for rubber bushes for wheel nuts and torque wrench to keep wheel aligned. It's Def nuts tho
This is the number one best e bike kit installation video I have watched. I have installed 500W's-3000W kits and have not found a video on UA-cam yet, that explains the battery connections, because to many people the battery connection is the most confusing part for the entire installation . Great job man.......
Very cool. I’m doing a kit from Amazon. I just ordered it. Suppose to be 1200w and 36mph. I have a 52v 30ah battery and would be happy with 28-30mph on my old trek
I had to grind the forks a bit to get this kit on the trek. It is a great kit. It has been kicking butt at about 30mph to 35mph and makes the front tire peel out. Way good for the price and so the kit was about $225, bike was free with another bike that I sold, and then about $250 for the battery. I also upgraded to kool stop brakes and I love them. Maybe disc later
exactly. completely wrong about locking your crank arms if you tight the arm bolt too much. it has nothing to do with the bearings inside the bottom bracket shell. safety hazard
@@jonasmeier417 That wouldn’t happen because the cranks are different lengths for such pieces. If this pedal assist module is not able to be used correctly/ tightened up properly it will all fail and the crash will hurt
This is the best video on UA-cam. No bs not 1000ads and hes not trying to sell you an ebike thst costs more than your nans morhers house 😂. Happy riding guys !!!!
I have a 1000w kit in Garage, I'm running a 250 geard at the moment but my 1000w is good for 35mph i just didn't like the weight and everything wears out fast at high speed on a bike 😅 🤠🤘👍 , but excellent for the money as most of us haven't got thousands to spend on a ready made, i love kits 🙏🤠🤘👍🇬🇧🇺🇸
I had the same issue with the battery mount. I was able to mount it the right way up by removing the plastic cover on the mounting, that exposes additional mounting brackets. Then put the plastic cover back on.
At 33mph on a mountain bike, I'd be wearing a helmet bro 😉 Fantastic tutorial! I'm gonna make my 250w Hyper bike into a 2000w beast. The only problem I have is that the original 250w battery is integrated into the frame. I'll work it out, lol 😁
Thanks for the comment. Helmet is a must for sure. I didn’t think it through during the video after a long day putting it together. Good luck on your project. Sounds exciting and I’m sure you’ll figure it out.
If you are planning to upgrade to a DUAL MOTOR, best set up is to use a Gear motor as the base and a Gearless motor to use as a turbo Booster ( 1500 to 2000watt ) . This set up provides build very practical of using gear motor within residential speed zones and using turbo Booster when on blvds or straightaway streets on long distance trips of a 5 to 10 mile or longer. Gearless motors only go so far on full throttle of a 3 to 5 mile range before the motor cuts off to cool down a few minutes. Using a Gear motor will decrease overall torque output( saves battery and not overheating motors) When on turbo Booster , you can have the gear motor on cruise control as regenerating battery power kicks in ( only batteries or factory e bikes that do this). The weight of this set up is ideal besides performance that is equal or more vs the 3000$ and higher e bikes.
With the type of battery you have (Hailong), you could have a controller hidden in the battery cradle with the control cables coming out of the it instead of just a battery connector. This eliminates the cabling between the battery and motor, and reduces clutter on your bike. The downside is that the controller is slightly less powerful than what you have (22A vs 30A).
Great video. I've got a 500w e bike, but definitely want to build a 1000w one on my old mountain bike. This video made up my mind! Thanks again. Have fun riding yours!
Thanks for the video. Very very good one.. 48v 12-20 ah will probably fit in most frames. If not you could maybe use a bicycle baggage carrier (min 25 kg load), And mount a small motorcycle topbox, that could hold the controller and a 10-60 ah battery..
Don't rely on the bottle holder bolts, the weight of a battery is too much for them. Either get a base plate with hose clamps to make sure the battery can't come out in an accident etc or do what I did, get a triangular battery that hangs in the frame by straps.
Thank you for this video. I look forward to convert a bike myself. I found your video inspiring and helpful. What was the reason for going with a different battery?
Here is the link to the product. Thanks! esoulbike.com/discount/DIY%2520POTENTIALS?redirect=%2Fproducts%2Fesoulbike™-48v-1000w-rear-wheel-electric-bike-conversion-kit-的副本
now that you know how to make an e bike do dis, get a sabcoton controller and another hub motor for the other wheel, also get a 72v battery and , if you live through it , it will be a beast and basicqally a 2wd motorcycle, have fun
So I just got a Mountain bike 26" for $50. Now I will spend $400 for the bike kit . But I'm not very confident doing this myself. So how much do you think the bicycle store would charge me?
Thank u I have a 21 speed torker bike I just got tired of pedaling up hills and I just need a way to rest my hip after the surgery from the year September 9 2021 once it’s converted I will send a shot out to you on my channel 😎
Bravo nice work..i already got a 20 inch folding ebike but i want to upgrade it to a 60 volt system.. I'm kinda nervous doing this upgrade cause I'm still new to ebikes..but it's something I'm thinking about doing one day tho .
esoulbike.com/discount/DIY%2520POTENTIALS?redirect=%2Fproducts%2Fesoulbike™-48v-1000w-rear-wheel-electric-bike-conversion-kit-的副本. Let me know if you ended up purchasing the kit. Thanks!
Were based in the Philippines and would like to do an eBike conversion also thats why am trying to see channels that can help us set it up. Hope we can ask you some queries about this thing someday. Good job...
Thank YOu good video. I have an older Schwinn 10 speed street cruiser with steel frame. BUT I like it, the seat and handle bars are comfortable and fit my body. It has 27 inch wheels that are 1 1/4 inch wide. Can you suggest a beginner kit for simply neighborhood cruising and workout with help on the hills and getting home if I gas out. It has rim brakes not caliber disc which i like but would need to upgrade to. Can offer suggestions for suppliers and sources. Thank You again, Dennis
I have just installed my battery up the other way like you have. Is this ok for continued usage? a bit worried about it hanging on just the lock is all, I'm not sure!
You need to have your motor laced to a new rim (can be done by a professionnal if you don't know how to do this). That's the downside of using rim-based brakes.
I noticed that you linked some similar kits in the description. Would you recommend those over the one you used in the video? The similar kits are about $200 cheaper and I want to know whether there's a large performance difference between them. Thanks!
They are all rated at 1000W. So in terms of power, they should offer the same performance. I would use the extra $200 for a longer range battery pack. Good luck on your project. Thanks!
@@diypotentials no, it is not exactly the same thing you have. I believe my problem is not having pedal assist hooked up or trying to use a 52V battery on a 48V system. I got this unit in an auction with no directions.
GREAT JOB SIR, PLEASE KINDLY REFER WHERE I CAN LEARN A STEP BY STEP GUIDE IN CONVERTING NORMAL BICYCLE TO E BICYCLE BECAUSE I WANT TO KNOW THE DETAILS FROM BEGINNER TO EXPERT EVEN IF ITS COST ME, THE BASIC KNOWLEDGE IS WHAT I WANT .
the entire kit probably weighs 4/5kg, so slightly harder but not a massive amount. If anything, it's easier because the motor *assists* your legs when pedalling
@@jjmmjj9999 Yes, I know there's added weight. But, I was wondering if the rear hub motor, itself, creates resistance for the rider. For example, I know someone that got a mid-drive eBike, and pedalling it with the motor off, it is like pedaling an elliptical machine at the gym, that someone set to level 10. I ask, because I plan on using the motor on my eBike, only when I'm tired. The plan is to pedal the majority of the time.
@@tr1707 my ebike (not this kit, it's a prebuilt one) does seem quite hard to pedal, and the idea of resistance due to the motor crossed my mind but i've put it down to the fact i'm quite large (115kg) and the bike itself is 25kg rather than the motor adding resistance
If you are in the US, you have to order the battery separately. It does not come with tools. I recommend watching the entire video for all the good details… thanks!
How long does it last? Is "it," worth it? My bike had three flat tires then another bike was stolen and my 80cc motorized bike keeps getting knocked overed.
I've done 3000 miles on a very similar looking motor and everything is still going just the same as when it was brand new. I ride it to work and home everyday.
@@diypotentials Thanks, I had been looking for a donor bike to convert, but have an old Cannondale mtb with rim brakes. I could stand to rebuild the brakes on that either way.
Yaaa... idk whats going on here but my 750w bafang mid drive can hit 33mph throttle only on the flat easy.. plus while full throttle and peddling my max speed is 42mph in flat ground.. i'd think a 1000wer could beat that
Only thing I forgot was torque bar. And good breaks. Other than that my 1990s mountain bike with 1500w motor hits 45mph. Good video
Jesus lol What motor is that? And what voltage? Gotta be a hot wired hub and plenty of volts to hit that speed..
@@danimayb hello mate. Just voilimart 1500w motor. Dunno bout control box. But it def kicks arse. In fact I'm having to go shopping morra for rubber bushes for wheel nuts and torque wrench to keep wheel aligned. It's Def nuts tho
It's good for 45 off throttle. Things is brakes despite being recent blocks just sent enough to stop it now
Congrats!
@@jakedonnely4094 ...don't lie!
..$$?..if true!
This is the number one best e bike kit installation video I have watched. I have installed 500W's-3000W kits and have not found a video on UA-cam yet, that explains the battery connections, because to many people the battery connection is the most confusing part for the entire installation . Great job man.......
Thank you and best wishes!
I have the same system too on my Engwe mountain bike I upgraded from 250w36v to 1000w 48v 😊 awesome job putting it together
Congrats on the upgrade! Thanks for sharing!
What's your top speed using an gps speedo app on your phone???
i want to make my mountain bike electric, were did you order ? or did you also made a video ?
I have a 48V 500watt motor on mine. Absolutely flies haha
Very cool. I’m doing a kit from Amazon. I just ordered it. Suppose to be 1200w and 36mph. I have a 52v 30ah battery and would be happy with 28-30mph on my old trek
Are you able to send the link ?
I’m looking at upgrading my mid to late 90’s trek..any info or links would be appreciated
I had to grind the forks a bit to get this kit on the trek. It is a great kit. It has been kicking butt at about 30mph to 35mph and makes the front tire peel out. Way good for the price and so the kit was about $225, bike was free with another bike that I sold, and then about $250 for the battery. I also upgraded to kool stop brakes and I love them. Maybe disc later
Your left crank arm is gonna come loose and fall off. Tighten that up man 👊😎
exactly. completely wrong about locking your crank arms if you tight the arm bolt too much. it has nothing to do with the bearings inside the bottom bracket shell. safety hazard
But Bud did not screw too tight, because he didn't want to squeeze PAS.
@@jonasmeier417
That wouldn’t happen because the cranks are different lengths for such pieces.
If this pedal assist module is not able to be used correctly/ tightened up properly it will all fail and the crash will hurt
Is there not a torque number to tighten the crank.properly?
This is the best video on UA-cam. No bs not 1000ads and hes not trying to sell you an ebike thst costs more than your nans morhers house 😂. Happy riding guys !!!!
thank you my controller had a different wire than the battery and your the only tutorial that actually showed how to cut and connect the wires
Thank you!
Great video man, thanks for showcasing the throttle and pedal assist.
May God be with you
Thank you!
@@diypotentials I have a question, did the pedal assist just come with the rear hub motor or did you also purchase a mid drive motor?
@@JoseDuthie14 The pedal assist should come with the conversion kit. Make sure it is part of the package before purchasing the kit. Thanks!
I have a 1000w kit in Garage, I'm running a 250 geard at the moment but my 1000w is good for 35mph i just didn't like the weight and everything wears out fast at high speed on a bike 😅 🤠🤘👍 , but excellent for the money as most of us haven't got thousands to spend on a ready made, i love kits 🙏🤠🤘👍🇬🇧🇺🇸
I PREFER DISC BRAKES FOR BETTER STOPPING POWER. CAO THE BIKE CONVERSION BE DONE WITH DISC BRAKES ON THE BIKE?
Greeting, it's a very good place to put the battery and controller there. The bike needs balancing for easy control and tire wear mitigation.🙂
I had the same issue with the battery mount. I was able to mount it the right way up by removing the plastic cover on the mounting, that exposes additional mounting brackets. Then put the plastic cover back on.
Wow! Good job on figuring that out. Thanks for sharing.
I wasn't sure what the purpose of the torque arm was. Glad I watched this first. Putting a 700c wheel/1500 watt motor on my diamondback hybrid.
At 33mph on a mountain bike, I'd be wearing a helmet bro 😉 Fantastic tutorial! I'm gonna make my 250w Hyper bike into a 2000w beast. The only problem I have is that the original 250w battery is integrated into the frame. I'll work it out, lol 😁
Thanks for the comment. Helmet is a must for sure. I didn’t think it through during the video after a long day putting it together. Good luck on your project. Sounds exciting and I’m sure you’ll figure it out.
@@diypotentialsthanks man 🙌
If you are planning to upgrade to a DUAL MOTOR, best set up is to use a Gear motor as the base and a Gearless motor to use as a turbo Booster ( 1500 to 2000watt ) . This set up provides build very practical of using gear motor within residential speed zones and using turbo Booster when on blvds or straightaway streets on long distance trips of a 5 to 10 mile or longer. Gearless motors only go so far on full throttle of a 3 to 5 mile range before the motor cuts off to cool down a few minutes. Using a Gear motor will decrease overall torque output( saves battery and not overheating motors) When on turbo Booster , you can have the gear motor on cruise control as regenerating battery power kicks in ( only batteries or factory e bikes that do this). The weight of this set up is ideal besides performance that is equal or more vs the 3000$ and higher e bikes.
Very useful information. Thanks for sharing…
Thanks for the video I now know how to fit mine and i wasn’t sure about the torque arm.
THANKS!
With the type of battery you have (Hailong), you could have a controller hidden in the battery cradle with the control cables coming out of the it instead of just a battery connector. This eliminates the cabling between the battery and motor, and reduces clutter on your bike. The downside is that the controller is slightly less powerful than what you have (22A vs 30A).
Great video. I've got a 500w e bike, but definitely want to build a 1000w one on my old mountain bike. This video made up my mind! Thanks again. Have fun riding yours!
Thank you!
How fast your 500w ebike goes?
@@CooperTUGA My 500W e bike would go around 26 mph on flat surface with throttle only
@@SeanH-zi7zw No way, mine can go over 30mph.
Thanks for the video. Very very good one.. 48v 12-20 ah will probably fit in most frames. If not you could maybe use a bicycle baggage carrier (min 25 kg load), And mount a small motorcycle topbox, that could hold the controller and a 10-60 ah battery..
Don't rely on the bottle holder bolts, the weight of a battery is too much for them. Either get a base plate with hose clamps to make sure the battery can't come out in an accident etc or do what I did, get a triangular battery that hangs in the frame by straps.
I think the unused orange/yellow front cable is a second break sensor for the right break.
Good vid.
That makes sense. Thank you!
Cool video. You made the install look so easy. I'd like to try this on my bike. Thanks for the content.
Would this Kit be compatible to 26" Fat tire bike?
is it possible to add a self regenative brake system to the kit?
ARE THE CONVERSION KITS MORE POWERFUL THAN THE ONES INSTALLED ON MANUFACTURED ELECTRIC BIKE?
Just check the motor size and battery capacity. It's possible to build a faster bike, especially if local laws limit what people can sell locally.
This is the best video I seen you are great keep up the good videos!!
Thank you!
I want to do this to my mountain bike. but I can find a smaller rear wheel hub that is 750 watts ?
Well done on the set up I think you might need a Helmet.
Thank you for this video. I look forward to convert a bike myself. I found your video inspiring and helpful. What was the reason for going with a different battery?
Esoulbike doesn’t sell battery to U.S. customers. Thanks!
What's the price including shipping
Here is the link to the product. Thanks! esoulbike.com/discount/DIY%2520POTENTIALS?redirect=%2Fproducts%2Fesoulbike™-48v-1000w-rear-wheel-electric-bike-conversion-kit-的副本
How do you know if the battery pack is compatible with the controller box or the motor
Really nice and useful video. Thanks! Hoy many cycles the battery can last? Is it LiPO4? Edit: does'nt mind. I checked the info. in the link provided.
I was wondering if this set up will work fory pedicab .. ive been looking for a kit to use to adapt to the pedicab
I don't see why not
My e bike conversion kit came without a LCD display unit. Can i buy one that will be compatible for this kit.
Hello can you put one of these kits on a bike with an alloy frame or no? Or is steel recommended because of stronger drop outs?
I'm buying the 1000watt viribus conversion on ebay where do I get the battery.
now that you know how to make an e bike do dis, get a sabcoton controller and another hub motor for the other wheel, also get a 72v battery and , if you live through it , it will be a beast and basicqally a 2wd motorcycle, have fun
so how do you add a toque sensor to finesse it?
I bought a pexmor conversion kit mine did not come with battery 😭
Do you have a video with the single speed version of this kit?
So I just got a Mountain bike 26" for $50. Now I will spend $400 for the bike kit . But I'm not very confident doing this myself. So how much do you think the bicycle store would charge me?
1000 bucks
what's that location, those beautiful rolling hills, they are reminiscent of the downland here in Hampshire and Wiltshire in the uK
San Francisco Bay Area in California. Thanks! 😊
@@diypotentials Beautiful !
Cut the harness, Why not DePin the connectors from plugs and insert into matching connectors?
how do u deal with the wheel falling out of the dropouts? im using 2 torque arms and it still falls out
nice video, I just got almost the same kit. I can't wait for the summer.
Excellent demonstration
Thank you!
Thank u I have a 21 speed torker bike I just got tired of pedaling up hills and I just need a way to rest my hip after the surgery from the year September 9 2021 once it’s converted I will send a shot out to you on my channel 😎
Thank you!
Bravo nice work..i already got a 20 inch folding ebike but i want to upgrade it to a 60 volt system.. I'm kinda nervous doing this upgrade cause I'm still new to ebikes..but it's something I'm thinking about doing one day tho .
Thanks and best of luck on your future project.
@@diypotentials thanks 😃
What is the size of this frame? I am having difficulty finding a bike that the battery fits on
Why did you need a new rim? Could you use original one?
So far I loved your video are explanations and how to was very in site for on the how to
Have you tried using a gps speedo app on your phone for the top speed?
does you controller not hit your front wheel when the front wheel suspension is bottomed out?
Good luck when it blows up in the moddle of the night ... 😂🎉🎉🎉
Do you think this wheel could work in the front?
Theyalways say its in the discription down below. I cant. Find it plz tellme i want to know wear i can get the same , kit
esoulbike.com/discount/DIY%2520POTENTIALS?redirect=%2Fproducts%2Fesoulbike™-48v-1000w-rear-wheel-electric-bike-conversion-kit-的副本. Let me know if you ended up purchasing the kit. Thanks!
I too would be interested in doing a video on a conversion kit for my Trek 7200 bike! 🙂
That would be awesome! Let me know how it turns out. Thanks!
where i buy all this alectric assist for any bike
Great video, very easy to follow
Thanks!
Nice video! Where are Esoulbike kits shipped from? I'm in the us. How long would it take to ship to me?
They have a warehouse in the California. It took them less than a week to ship to me. I’m in CA as well…
@@diypotentials Thanks! Is your promo code still valid?
@@jameshoutsinger4190 yes…
Hello dear sir yes to your bicycle fit it up with your electric ebike conversion kit nough respect.
Were based in the Philippines and would like to do an eBike conversion also thats why am trying to see channels that can help us set it up. Hope we can ask you some queries about this thing someday. Good job...
What’s the “unused” wire supposed to go to?
48 volt 1500 watt kit prices
1000w is very strong motor...so that means this run very fast?
Thank YOu good video. I have an older Schwinn 10 speed street cruiser with steel frame. BUT I like it, the seat and handle bars are comfortable and fit my body. It has 27 inch wheels that are 1 1/4 inch wide. Can you suggest a beginner kit for simply neighborhood cruising and workout with help on the hills and getting home if I gas out. It has rim brakes not caliber disc which i like but would need to upgrade to. Can offer suggestions for suppliers and sources. Thank You again, Dennis
I have just installed my battery up the other way like you have. Is this ok for continued usage? a bit worried about it hanging on just the lock is all, I'm not sure!
Mine is holding up well. No issue with the positioning of the battery so far. Thanks!
What happens when the rims wear when using v breaks, , how do you change the motor to a new wheel?
You need to have your motor laced to a new rim (can be done by a professionnal if you don't know how to do this). That's the downside of using rim-based brakes.
How cost the prices that you put in your bike
Great Job Bud. It looks great!
Thank you!
I noticed that you linked some similar kits in the description. Would you recommend those over the one you used in the video? The similar kits are about $200 cheaper and I want to know whether there's a large performance difference between them. Thanks!
They are all rated at 1000W. So in terms of power, they should offer the same performance. I would use the extra $200 for a longer range battery pack. Good luck on your project. Thanks!
Wear is the discription area im ona tablet. Plztell me
What’s the range?
30-50 miles…
@@diypotentials that’s good to know. Was planning to convert my bikes to electric
I hooked everything up except the pedal assist because it wont attach on my bike. I have everything energized, bike motor not doing anything. 😢
Sorry to hear. Are you using the same motor, controller, display, and battery pack?
@@diypotentials no, it is not exactly the same thing you have. I believe my problem is not having pedal assist hooked up or trying to use a 52V battery on a 48V system. I got this unit in an auction with no directions.
GREAT JOB SIR, PLEASE KINDLY REFER WHERE I CAN LEARN A STEP BY STEP GUIDE IN CONVERTING NORMAL BICYCLE TO E BICYCLE
BECAUSE I WANT TO KNOW THE DETAILS FROM BEGINNER TO EXPERT
EVEN IF ITS COST ME, THE BASIC KNOWLEDGE IS WHAT I WANT .
Whats the biggest battery you can put on a 1000w 48 v conversion kit
For maximum speed, power and range use a 52v battery. Minimum battery for a 1000w kit would be 48v.
I'm interested in this and how can i have access to it,am in Zambia kabwe town
Hello dear sir you can pull it out like a clutch. Kit
brake lever or brake sensor? what to order?? I have mechanical brake sistem on my bike. PLZ HELP
The brake sensor should come with the conversion kit. Thanks!
@@diypotentials yeah i know. but which one is better for mechanical disk brakes?
Very good ! Excellent job! Can you tell me which battery you bought specifically? Which brand. Thank you
The link to the exact battery pack is in the video description…The brand is Engwe. Thanks!
This video was awesome, brother! Thanks!
Thank you!
How much harder is it to pedal an custom ebike on your own, like this one, than your bicycle before the conversion?
the entire kit probably weighs 4/5kg, so slightly harder but not a massive amount.
If anything, it's easier because the motor *assists* your legs when pedalling
@@jjmmjj9999 Yes, I know there's added weight. But, I was wondering if the rear hub motor, itself, creates resistance for the rider. For example, I know someone that got a mid-drive eBike, and pedalling it with the motor off, it is like pedaling an elliptical machine at the gym, that someone set to level 10.
I ask, because I plan on using the motor on my eBike, only when I'm tired. The plan is to pedal the majority of the time.
@@tr1707 my ebike (not this kit, it's a prebuilt one) does seem quite hard to pedal, and the idea of resistance due to the motor crossed my mind but i've put it down to the fact i'm quite large (115kg) and the bike itself is 25kg rather than the motor adding resistance
Very interesting video. I’ve been thinking about this. Good to know what’s involved.
Thank you!
Excellent clear explanation of installation.
Thanks!
I also dream of having an ebike. How much did it cost sir?
Does everything come with it or do you have to buy additional parts
If you are in the US, you have to order the battery separately. It does not come with tools. I recommend watching the entire video for all the good details… thanks!
hi is this kit waterpoof?
How long does it last? Is "it," worth it? My bike had three flat tires then another bike was stolen and my 80cc motorized bike keeps getting knocked overed.
I love it so far….it is fast and powerful and solidly made…Thanks!
@@diypotentials I really have a phycological battle with these things as people are always trying to talk me out of it.
@@veteransowhat5669 listen to the one that matters the most, you. Thanks and good luck!
I've done 3000 miles on a very similar looking motor and everything is still going just the same as when it was brand new. I ride it to work and home everyday.
Nice job, I'm in the market for one, I'll check esoul out!
Thank you!
Now that it's been a few months with some time to ride, are you finding that you have enough stopping power with the rim brakes?
I prefer disc brakes, but my bike doesn’t support it. As long as I’m using both brakes, there is sufficient braking power. Thanks!
@@diypotentials Thanks, I had been looking for a donor bike to convert, but have an old Cannondale mtb with rim brakes. I could stand to rebuild the brakes on that either way.
Is there any more promotional codes
my 80cc motorized bike does 38 and the kit cost me 300.As long as I have gas she goes.Does about 80milies per gallon.
Does this allow pedal assist?
Yes. Thanks!
Do you need that battery for the conversion?
No, you can choose any other battery of your liking… Thanks!
I’m having trouble finding where to buy that battery
The link to the battery is below the video description…
@@thouny1145 true. i tried searching the product name and only saw bikes.
Here is the link to the battery...ENGWE Unit Pack Power 48V 15AH Ebike Battery Electric Bike Lithium Li-ion Battery Pack
amzn.to/41ZQRvy. Thanks!
Yaaa... idk whats going on here but my 750w bafang mid drive can hit 33mph throttle only on the flat easy.. plus while full throttle and peddling my max speed is 42mph in flat ground.. i'd think a 1000wer could beat that
You are very light weight man but it should yeah
How many volts is your setup? Top speed of the motor is directly proportional to voltage.
What Bike Are You Using?? Thank's
@@danielandujar5479 Trek 4300 Mtb
@@Addison0526 750w fang mid drive 52V batt at 25amps
Is there a uk warehouse
Excellent tutorial, thank you.
Thank you!
Great job 👍.
How much it cost ?