TBparts 88cc big bore kit install honda CT70 dax
Вставка
- Опубліковано 16 вер 2024
- This Episode we'll take a stock 72cc honda engine and pull it down, clean it up and paint it 2 pack satin black, then re assemble with the tb parts 88cc big bore kit for the stock honda head.
Once we're done we will start it up and run it on the engine stand...
Beautifull work.. Great choice in colour and details.
Thank you! Cheers!
Awesome job and video! Just finished a 72cc. Can't wait to do an 88 on the next one!
Thanks mate, the 88cc is a great little cruiser in a ct70,,,,the tb kit has been excellent , very reliable....would highly recommend.
Those screws holding down the centrifugal filter cover are a nightmare to get off. Impact driver is the only way. But man, I would not have used my piston skirt to stop the crank turning!
yeah those screws are a nightmare, glad i didn't have to drill the heads off...the piston was a throw away item , it was off a later model engine with the flat top.
Nice video! Very helpful, i was wondering, was there a spring i missed seeing prior to the clutch cover being put on as part of the shifting Assembly?
Hi adam ar 15:26 there's the a piece with a cut out in it and theres a spring with about 2 or 3 coils that goes in the centre of that piece then the clutch coved goes on ....if. you look up cmsnl.com they have exploded diagrams of everything...its my go to website for any assembling duties...and you can buy parts from them as well.....
@@rustknuckles4337 Awesome! I'm doing my first 88 kit this weekend. Will change to a higher volume oil spinner but they say the oil passage should be drilled using a 2mm bit. Thanks for the Link!
@@adamdelarozza1985 yes I drilled out the oil passage with a 2mm drill bit and installed the high volume oil pump, just didn't put it on the video.. ...the oil pump came with my kit which was good...
hi,what is the model of your stator?not original isn't it?thx
Hi the stator is a cdi stator that i found on eBay for the ct70k0 model, came with everything you need and was easy to install.
What carburetor is that and what jets are in it? Pilot and main.
The carb came with the tb parts big bore kit it's a 20mm Chinese carb...unsure what jet sizes are in it but came with a main jet kit for tuning....I ended up swapping it for a genuine mikuni.
Where did you get the stand?
Hi John...I made the stand myself from some square tubing and flat bar...I bought a cheap tank off ebay and painted it with a hammertone grey finish from a spray can.