Have a 300 or 310? Here's Your Supercharger Fix!
Вставка
- Опубліковано 10 лип 2024
- Join us for an in-depth look into supercharger maintenance on the Kawasaki Ultra 300 and 310! In this video, we guide you through the essential steps of maintaining your watercraft's supercharger system, covering what needs replacement and what doesn't. Whether you're a seasoned enthusiast or new to personal watercraft maintenance, our expert tips and insights ensure your Kawasaki Ultra runs at peak performance for all your aquatic adventures. Don't miss out on maximizing the lifespan and power of your watercraft!
Chapters
0:00 Intro And Important Info
2:55 Removing The Supercharger Pulley
3:59 Oil Fill/Drain Plug
4:54 Removing The 6 12mm Hex Case Bolts
5:14 Separating Transmission From Supercharger
5:52 Separating Supercharger Transmission Housing
6:17 Info On Gears And Bearings
6:53 Bearing Highlight Information
8:15 Reduction Gear Housing Info
9:16 Damper Assembly Info
10:19 Disassembling / Inspecting Damper Assembly
12:50 Pressing Shaft Out Of Damper Assembly
13:22 Shaft Info
13:42 Removing Eaton Rotor Pack From Housing
15:05 Inspecting Rotors And Internals
15:59 Highly Recommended Replacement
16:20 Removing Needle Bearings
17:16 Removing Bearings With Collet Puller
19:15 Rebuild Kit Options
20:39 More Information And Help - Авто та транспорт
This has got to be the most thorough tear-down and inside look at the Ultra 310 Eaton TVS on the internet! Cool to see the damper unit and internals. Even after all these years I am still amazed they managed to get a friggin TVS supercharger onto a Jet Ski! Big thank you to KP for always providing such great support and top notch products and components. You guys are pretty much the only ones on the planet that provide rebuild kits for these units! 😎
Thanks JD! Leave it to Kawasaki to design something really cool :)
This is the only video as of now with a great explanation on the Kawi super charger. Great video my man. We need more like this.
Thanks! More videos are coming!
Great content & information Steve. Thanks for sharing.
Billy D
My pleasure Billy, I’m glad you enjoyed it !
Would have been nice to show the needle bearing installation.
super informative
Glad it was helpful!
Thanks for providing a super informative video of the Eaton S/C!
Our pleasure! Glad it was helpful !
Thanks for the video makes considering a DIY rebuild less daunting. I have a 2012 300 LX. At the end of last year it started to drop out about 55mph. Seems fine at low speeds, hit 55 or open up the throttle it just drops like you let off the throttle. So you do and ski is still running and you can work it back to about 55. Does this 100% of the time. As far as I can tell it came after filling up with fuel. Though I'm not sure as it happened while friend were riding and they never told me about the issue. I was thinking to rebuild the Supercharger but was wondering your expert opinion?
Could be fuel pump issue, replace the pump since it is cheap, and see if that resolves the issue. Of course new plugs first before anything
Is there a supercharger removal video somewhere?
We do not have one as of yet
What do you do if the dampers are bad? Just throw the whole supercharger away and order a new one?
Unfortunately, yes. If we see a large volume of damper failures, we will make them. But, for now there is a very small volume.
How do you have a press but use a claw hammer? Lol
Wow…. Every 50 hrs or so engine back to replace the belt. Every 50 hrs the exhaust has to come apart. Every 25 hrs the top half of the ski has to come apart to change the fuel filter/sock, every 100 hrs it’s engine out to rebuild the spr chrgr. Geez… Who has the time or $$ for a Kawi?? Not to mention all the parts that need replaced because they easily rust. I mean they’re nice and all but seems like a lot of expansive down time for a ski.
If you do some of the upgrades that we offer you wont have to worry about such frequent service intervals.
Is the best made machine, but is not made for a Middle class customer..😊 you have to be a Tech or have a sponsor.
It's the best machine, but is not made for a medium class customer 😊is not..
Music is horrible. Leave it out except intro and outro. And never use head tracking.