If you need one of these units Ink Bird has extended a cool discount!! Just input the discount code at checkout after clicking the link.. 15% off WiFi Temp Controller (WIFI ITC-308): (USA Store) 89KAGQJZ : amzn.to/3eTSlOg (Canadian Store) PUJ22MLU: amzn.to/2D9EmXa
Thanks for a nice clear explanation. For info the Wi-fi 308 is available from Amazon UK too. I use mine for controlling my greenhouse environment, specifically a ‘hoop house’ propagator inside it.
I was about to send this thing back because I couldn’t figure out the ridiculous wording on the instructions. Glad I found your video. Ink bird should send you some money.
When I got to the part where you said "Now this unit works fine if only the heating element or cooling element are plugged in...." I knew i found what i was searching for. Thank you man, god bless ya!
Havent even watched the full video and im commenting, the way you describe everyrhing in detail is excellent , no other videos of the inkbird do this , thank you
@@2guysandacoolercan we use it in our chick's brooder room or this equipment just works with refrigerator etc? Because I want to attach cooling fans with it in extreme summers and i belong to a hotter region where summers last till November. can you help
Hi Eric. First of all you're doing very good job with your videos. Very helpful and thank you for that. I just set up the inlbird wifi temperature controller in my small beverage center and it was working great until i changed from the app the refrigerator delay from 3 minutes to 4 and tun the the tmperature ofnthe fridge all the way to the coolest. After that whnever reaches 57°f instead of delaying for 3 or 4 minutes it's start cooling again right away until 55. My settings is exactly like yours.
Great stuff, very useful! Mines on they way, just wanted to get a better understanding of how they work, setups and stuff before it comes…. I’ll probably be back while setting it up once it’s here. Thanks!
How did you setup your configuration for your greenhouse? Heating = intake? or outtake? Cooling = outtake? or intake? I'm guessing for a growing environment for veggies and fruit growing, you might set it up in this configuration below..?? Heating = OutTake Exhaust fan (dirty air) Cooling = Intake Fan = (clean air) Ideally I'm guessing additionally you could also use InkBird Humidity WiFi Controller IHC-200wifi and have it setup in this configuration below also. Work1 = Humidy too Low = Turn on Humidifier Work 2 = Humidy too High = Turn on Dehumidifier
Hi! How come the temperature differential are not working. Inkbird said I have to activate "normal mode". Seems like mine is in "special mode".How do I set that?
Thanks for the video, the app and instructions are very difficult to understand. After watching your video now I understand what’s going on. The app is confusing as it has scrolling numbers left and right and that’s the decimal point.
Thank you! What confusing terms this manufacturer has, the paper manual that came with it (tiny, hard to read), the online pdf manual and the iPhone app all have different terminology for the same settings? I think it started with a lab guy who no one understood what the hell he was saying, then went to one of the tech staff who tried to get it right and ended up with a professor who struggles to reach is students. WTH! What does “hysteresis” mean ??? I didn’t know I was going to need a class to set this. Oh and why on the device have PV and SV when nothing mentioned even has those letters. Had I not already known the temp of my room that first one would be just as confusing as the others. Your video makes perfect sense.
All set up and working great! Only one thing, I can’t get the wifi light to stop blinking. I did the setup in my house where the connection is strong, but out in my metal shop it’s like a Faraday cage. When I pressed the wifi button (don’t ask me why, it’s late) the APP/blinking light started and since I had no connection on my phone, the Weedbird couldn’t find anything. I tried holding in the wifi, the set, nothing it just started looking again. I check in the morning.
@@2guysandacooler It must time out eventually because I came back the next day and no blinking. It’s working great with the mini oil filled radiator I bought. These radiators don’t dry out the air like the blower types heaters do. Plus it only draws 700w.
Great video. I'm trying to change both the heating and cooling hysteresis on the phone app of my 308. Everytime I try to change the values, it reverts back to 2deg for both. Not sure what I'm doing wrong? Cheerz
Very nice. For some reason my cooling back temp doesn’t seem to work. I have it set at 10 degrees. But my cooling unit clicks on when it’s even .5 over my target.
I’ve been using that controller for over a year and never knew about the smart home connection. I can now ask Alexa how my smoker is doing! Very nice. TU What APP & revision APP are you using? Update: I was using the InkBird pro app that doesn’t have the bells and whistles. Again, TU
Dear, please note that your request need two ITC-308-WIFI's to achieved. If have any problem, please feel free to contact our email support@inkbird.com
Hi - I think I have set mine up correctly however the unit indicates its always either heating or cooling, this is when I have set heat differential parameters. for example if I have the heat diff set for 5degrees higher or lower than 55 degrees, so between 50 degrees and 60 degrees the unit should neither be heating or cooling however both on the device and on the app at say 56 degrees it indicates its cooling and at 53 degrees its heating. is this normal? I would expect the unit to be off neither heating or cooling because its within the differential parameters? TIA
That is correct. If you have the heating diff. set to 5 then when the temp gets below 50 the heater will kick on. same for the cooling diff. when the temp gets above 60 the fridge (or whatever you have plugged into it) will kick on. Not sure why yours is kicking on at 3 degrees up or down..
bought this one by mistake… The aquarium version of this unit is ITC-306a. comes with two probes with suction cups. really goddamn annoying how Amazon said this version with the metal probe is also for aquariums…
Do you know if you can schedule target temperatures? I would like my temperature at 25 degrees Celsius during the day and 21 degrees Celsius at night. Having trouble with the scheduling function.
When connected to the wifi, will the app still work for me away from the house? Like will I get a temperature difference notification via the app If I'm out and about?
Hi, Would you kindly answer this question please before I purchase an Inkbird ITC-308. I have a Klarstein Thermo electric humidor to store my cigars. It is cooling only and does not have an heating element. The temp range for cooling is 12 to 18 degrees centigrade, that is the only settings on its digital thermostat. I need it to not start cooling until the internal temp reaches 21c. I have a small heat pad in there to get the temp up to 21c but have to have the humidor unplugged otherwise the cooling kicks in and takes it back to 18c. My question is will your Inkbird product override the internal thermostat of my humidor and not allow the cooling fans to kick in unless the temp exceeds 21c. Will the unit still work and kick in when the temp exceeds 21c even though it was set at the factory to only have an adjustment on its digital thermostat of 12 to 18c. I can say that the digital readout does show if for example I have deliberately allowed the unit to get to 25c by unplugging the unit and turning up the heat pad, then plugging the unit in and it shows the 25c on the readout and then the cooling kicks and takes it back to 18C. Very frustrating I just want a temp of 21c constant by leaving my heat pad on and the unit kicking in and cooling back to 21c when it exceeds this temp. Really hopeing your product can help and looking forward to your reply.
Great questions. For starters, this isn't my unit. I just use it. It will work for your application. You would basically keep the same set up you have currently. Plug the heating pad into the "heating" port and the humidor into the "cooling" port. The controller will then take over the functions. Set it to whatever temp you want and that's where it will stay.
Im only using heating biy not cooling. Is there anyway i cud have it to only heat up on a certain time. Wud i be able to plug the inkbird controller into a timer.
How can I use it 4 cooling...there is some different between mine and that ink bird in the video.i tried long time u programme it on cooling but icouldnt
i just set mine up this was really helpful. but the cooling and heating lights are off. is this normal? lol ? i plugged my heat mat into heating though. i want it at 80 for my pacman frog
The cooling and heating light should come on when the parameters that you set are triggered. So if you want the temp to be 80F and you have the heater difference set at 4degrees. Then when the temp drops down to 76f the heater should come on.
I have bought one wifi version. And I keep getting AH ALARM THAT SOUNDS LOUD . IM FOINF HIGH AT 84 LOW AT 80 and sometimes it goes to 84 and AH alarms, I saw you presed SET TO SET ALARMS OFF, BUT HOW TO TURN IT OFF COMPLETELY. thanks for your help
I have this hooked up for one day. It was working fine then at 3 am my wifi was lost for a few minutes and alarm was going off. Is this something that happens all the time ??
Are you aware if there is any product like this unit, but that has a clock built in? So that I can request a cooling temp for the day, and a different one for the evening ?
Dear, sorry that ITC-308-WIFI cannot achieve this function, we recommend you ITC-310T-B(NO WIFI). If have any problem, please feel free to contact our email support@inkbird.com
It really depends on what type of cheese you are making but for most cheese you can use the settings in this video. You'll have to monitor the way your cheese cave responds to the settings and make small adjustments as each refrigerator is slightly different. Try to keep the temp at 55f and the humidity at 80%
Hi So can u clarify if I have set to 65 with differential of say 5 degrees on either end.. it won't turn on til it hits either 60 or 70 right but then it will stay on to target temp. Is there any way to give target temperature a range? Thanks.
You are correct. In essence by setting the differentials you are giving the unit a range. so if you set the temp to 65f and you give it a 5 differential both ways. Your range become 60-70f. What this unit tries to do is provide an average. So in theory what you set it at will become the average of what the area will have..
Is there anyway through the app to set up an automated schedule for different times of the day… like for growing plants I want my “nighttime” temperate to be slightly cooler than when lights are on to mimick outdoor reality. I was hoping with the WiFi enabled controller this would be simple, but I cannot navigate my way through the “Tap to Run” setting or the “automation” tab… any help or advice would be much appreciated!
Dear, sorry that ITC-308-WIFI cannot achieve this function, we recommend you ITC-310T-B(NO WIFI). If have any problem, please feel free to contact our email support@inkbird.com
@@INKBIRD-official Ι have aquestion about refrigerator compressor delay. I use my temperature controller in a small beverage center and only use cooling at inkbird. I have target temperature 55°f and heating/cooling differential 2°f so 57°f until compressor go on again. Now i set the compressor delay for 3 minutes. Does that mean that the compressor will start working again in 3 minutes after i hit 57 or 3 minutes delay since it stoped at 55. When my controller reaches 55 stops .then it takes arround 8 minutes to reach 57 and then right away the compressor starts without 3 minutes delay. Also heating screen is turn on sometimes in the app while i m not using any heating source. I would love to get some clarification right here because i dont know if this is normal or something is wrong with the device. Thank you in advance.
@@evangelosmakris703 Hello, The PT compressor delay protection principle is: When the time interval between two refrigeration operation is larger than preset delay, the equipment will start refrigeration immediately; when the time interval between two refrigeration is less than preset delay, the equipment won't start refrigeration until preset delay is satisfied. For example PT=3. (Compressor Delay 3 mins) For the first time, when temperature reached TS+CD, it will turn on the cooling outlet, turn off at TS. It takes 1 min to reach TS+CD again, at this time, the cooling outlet will not turn on, it will wait 2 mins. So if you set PT=3, when it takes 8 minutes to reach 57 degrees from 55 degrees, then its delay time is reached and therefore at 57 degrees it will turn on the cooling output.
Dear, please note that the power range of the ITC-308WIFI is: Max. 10A, 100V ~240V AC. If have any problem, please feel free to contact our email support@inkbird.com
no matter what i set my target heat to, it won’t go above 77. its so annoying. how do i fix that? it lets me set everything then after i do f or c and hit and hold set it just goes back to 77.
Dear, may I ask did you set it up by pressing the button? If you press and hold the set button to save and exit, it also won't save the target temperature setting? If have any problem, please feel free to contact our email support@inkbird.com
Only 10AMPS folks. Don't burn your homes down and try to run high current devices. Certainly nothing like a HEATER OR REFRIGERATOR. I seriously doubt this think will last let alone not burst into flames if used with these. I would hope it's internally fused just incase stupid happens.
Hello, first I want to say that I am a big fan of youre show ( I think it is called show, or ??) love your videos about the starter cultures, but I have a question, I got a frozen bag of Starterculture BactoFlavor BFL-T03. All I can find on the net, is that it is simular to TSPX, although the flavour side of it. I want to use it, but don't know if I have to follow the same Ph en Temperatures as you tell about in that video do you know how to use that starterculture ?? it would be very helpfull. thanks and keep on the good work. greetings from Holland
Thank you! Check out this link and go to page 3 (I think). Your range is 65F-85F with 85% humidity for 36-72 hours till your pH hits 5.0-5.2. Use it exactly as T-SPX.
@@alainjanssen9393 LOL... hjemmeriet.com/da/ChrHansen/Brochures/Meat%20manual_UK.pdf It's page 30. You can read about the type of bacteria. Then on page 20 you can see what each one of the bacteria likes :)
I don't think you can reset it. Best option would be to uninstall the app, clear the app memory, reboot the phone, and reinstall the app. See if that works. Also are you using 2.4ghz wireless?
If you need one of these units Ink Bird has extended a cool discount!! Just input the discount code at checkout after clicking the link..
15% off WiFi Temp Controller (WIFI ITC-308):
(USA Store) 89KAGQJZ : amzn.to/3eTSlOg
(Canadian Store) PUJ22MLU: amzn.to/2D9EmXa
Thanks for a nice clear explanation. For info the Wi-fi 308 is available from Amazon UK too.
I use mine for controlling my greenhouse environment, specifically a ‘hoop house’ propagator inside it.
Where is your video for making a fermentation box? I was hoping to see your design with the ink bird for making yogurt. Thanks!
I was about to send this thing back because I couldn’t figure out the ridiculous wording on the instructions. Glad I found your video. Ink bird should send you some money.
When I got to the part where you said "Now this unit works fine if only the heating element or cooling element are plugged in...." I knew i found what i was searching for. Thank you man, god bless ya!
Thank you so much for doing a detailed walkthrough, I'm using this to set up my aquarium heater. I really appreciate it
I have been trying to find a comprehensible instruction for setting this baby up for ages. Thank you so much!!!
Havent even watched the full video and im commenting, the way you describe everyrhing in detail is excellent , no other videos of the inkbird do this , thank you
I appreciate that!
@@2guysandacoolercan we use it in our chick's brooder room or this equipment just works with refrigerator etc? Because I want to attach cooling fans with it in extreme summers and i belong to a hotter region where summers last till November. can you help
You're a Great Teacher. Many thanks for your time doing this useful & instructional video.
Hi Eric. First of all you're doing very good job with your videos. Very helpful and thank you for that. I just set up the inlbird wifi temperature controller in my small beverage center and it was working great until i changed from the app the refrigerator delay from 3 minutes to 4 and tun the the tmperature ofnthe fridge all the way to the coolest. After that whnever reaches 57°f instead of delaying for 3 or 4 minutes it's start cooling again right away until 55. My settings is exactly like yours.
Also right now i just changed the refrigerator delay to 5 to see what happens and it shows me the heating screen. I have no heating plugged
Very helpful video. Especially the app portion at the end. Thanks!
This was perfect for me to set up didn’t even have to read the instructions thanks !
Great stuff, very useful! Mines on they way, just wanted to get a better understanding of how they work, setups and stuff before it comes…. I’ll probably be back while setting it up once it’s here. Thanks!
Excellent info.! Beautiful scenery behind you. Fermentation is on the learn list-with your help I’m gonna get there! Thanks!
Absolutely!!! That's my back yard. Banana trees everywhere :)
Thank you for explaining this so simply. Now mine works as it should.
Thank you for posting this. I couldn't figure out based on the instructions
Exactly what I was looking for, thanks heaps man 🙏🏻
Best video I’ve seen! Thank you 🙌🏼
Sir you just saved me a ton of headache with that instruction manual.
Yeah thanks for this been trying to set mine up and was having some issue. You cleared up a lot of queries I had about the device
You are so perfect bro. Thanks for the review. There is always someone or something in the world, who shows you the path". Thanks
Outstanding demonstration. Thanks.
Amazing thanks for good explanation !
Now to try setting up the humidity controller...
safe, simple, no suction, accurate. FISH LOVES THIS THING
THANK YOU! You made setting this up for my greenhouse so easy
How did you setup your configuration for your greenhouse?
Heating = intake? or outtake?
Cooling = outtake? or intake?
I'm guessing for a growing environment for veggies and fruit growing, you might set it up in this configuration below..??
Heating = OutTake Exhaust fan (dirty air)
Cooling = Intake Fan = (clean air)
Ideally I'm guessing additionally you could also use InkBird Humidity WiFi Controller IHC-200wifi and have it setup in this configuration below also.
Work1 = Humidy too Low = Turn on Humidifier
Work 2 = Humidy too High = Turn on Dehumidifier
Hi!
How come the temperature differential are not working. Inkbird said I have to activate "normal mode". Seems like mine is in "special mode".How do I set that?
Thanks... I cannot wait for your new stuff.
Fantastic explanation of this controller 👍
Thanks for the video, the app and instructions are very difficult to understand. After watching your video now I understand what’s going on. The app is confusing as it has scrolling numbers left and right and that’s the decimal point.
Cold plunging brought me here 👋
Great instructional video. Thanks
Thank you. Fantastic logical presentation
This video was so awesome LEGEND THANKYOU !!!!
Nice! I'm looking for a warming cabinet to convert to a hot/cold smoker. The wifi feature here will be great!
That's perfect...
Awesome! You just made a sell! Thanks
Cool. It's a great little unit.
Can I remove the alarm?
Thank you very helpful compared to the manual
Great instructional video. Simple and highly understandable. Thanks. 😁
Thank you for the walk thru
You did show how to connect it to your Wi-Fi SMDH
Thank you!
What confusing terms this manufacturer has, the paper manual that came with it (tiny, hard to read), the online pdf manual and the iPhone app all have different terminology for the same settings? I think it started with a lab guy who no one understood what the hell he was saying, then went to one of the tech staff who tried to get it right and ended up with a professor who struggles to reach is students. WTH! What does “hysteresis” mean ??? I didn’t know I was going to need a class to set this.
Oh and why on the device have PV and SV when nothing mentioned even has those letters. Had I not already known the temp of my room that first one would be just as confusing as the others.
Your video makes perfect sense.
All set up and working great!
Only one thing, I can’t get the wifi light to stop blinking. I did the setup in my house where the connection is strong, but out in my metal shop it’s like a Faraday cage. When I pressed the wifi button (don’t ask me why, it’s late) the APP/blinking light started and since I had no connection on my phone, the Weedbird couldn’t find anything. I tried holding in the wifi, the set, nothing it just started looking again. I check in the morning.
interesting. Let me know what happens..
@@2guysandacooler It must time out eventually because I came back the next day and no blinking. It’s working great with the mini oil filled radiator I bought. These radiators don’t dry out the air like the blower types heaters do. Plus it only draws 700w.
@@Mr_PNW nice. That's great to know
Thanks very much sir for your great video.
Great video. I'm trying to change both the heating and cooling hysteresis on the phone app of my 308. Everytime I try to change the values, it reverts back to 2deg for both. Not sure what I'm doing wrong? Cheerz
Great video. I have a question:why can’t I see the humidity in the app?
Great video Erick
Thanks Robert.
Great info thanks for the vid!
Thanks for the explanation, now i can brew some good beer 😁
Very nice. For some reason my cooling back temp doesn’t seem to work. I have it set at 10 degrees. But my cooling unit clicks on when it’s even .5 over my target.
you might want to reach out to inkbird
Could you talk about t a hot house with plants
Can you use a surge protector on the heating side to set up multiple heat mats?
I’ve been using that controller for over a year and never knew about the smart home connection. I can now ask Alexa how my smoker is doing! Very nice. TU What APP & revision APP are you using?
Update: I was using the InkBird pro app that doesn’t have the bells and whistles. Again, TU
For others readers its the Inkbird Smart app.
Also good for aquariums
Please explain how to heat below 15 and cool above 30 and off everything between 15 and 30.
Dear, please note that your request need two ITC-308-WIFI's to achieved. If have any problem, please feel free to contact our email support@inkbird.com
Hi - I think I have set mine up correctly however the unit indicates its always either heating or cooling, this is when I have set heat differential parameters. for example if I have the heat diff set for 5degrees higher or lower than 55 degrees, so between 50 degrees and 60 degrees the unit should neither be heating or cooling however both on the device and on the app at say 56 degrees it indicates its cooling and at 53 degrees its heating. is this normal? I would expect the unit to be off neither heating or cooling because its within the differential parameters? TIA
That is correct. If you have the heating diff. set to 5 then when the temp gets below 50 the heater will kick on. same for the cooling diff. when the temp gets above 60 the fridge (or whatever you have plugged into it) will kick on. Not sure why yours is kicking on at 3 degrees up or down..
bought this one by mistake… The aquarium version of this unit is ITC-306a. comes with two probes with suction cups. really goddamn annoying how Amazon said this version with the metal probe is also for aquariums…
Do you know if you can schedule target temperatures? I would like my temperature at 25 degrees Celsius during the day and 21 degrees Celsius at night. Having trouble with the scheduling function.
How do I turn off the alarm from the app?
When connected to the wifi, will the app still work for me away from the house? Like will I get a temperature difference notification via the app If I'm out and about?
I was wondering if I could use the inkbird with an ac unit to keep a insulated 6x8 room at 38 degree to keep a deer or 2 cool??
My freezer only cuts on when I plug it into the Heating port.
I don’t get it.
Yes I need this for my solomy that I'm growing🤥
Can the alarm be silenced in the app?
I can’t find out how
Now you know something about this ?
Hi,
Would you kindly answer this question please before I purchase an Inkbird ITC-308.
I have a Klarstein Thermo electric humidor to store my cigars. It is cooling only and does not have an heating element. The temp range for cooling is 12 to 18 degrees centigrade, that is the only settings on its digital thermostat. I need it to not start cooling until the internal temp reaches 21c.
I have a small heat pad in there to get the temp up to 21c but have to have the humidor unplugged otherwise the cooling kicks in and takes it back to 18c.
My question is will your Inkbird product override the internal thermostat of my humidor and not allow the cooling fans to kick in unless the temp exceeds 21c. Will the unit still work and kick in when the temp exceeds 21c even though it was set at the factory to only have an adjustment on its digital thermostat of 12 to 18c.
I can say that the digital readout does show if for example I have deliberately allowed the unit to get to 25c by unplugging the unit and turning up the heat pad, then plugging the unit in and it shows the 25c on the readout and then the cooling kicks and takes it back to 18C.
Very frustrating I just want a temp of 21c constant by leaving my heat pad on and the unit kicking in and cooling back to 21c when it exceeds this temp.
Really hopeing your product can help and looking forward to your reply.
Great questions. For starters, this isn't my unit. I just use it.
It will work for your application. You would basically keep the same set up you have currently. Plug the heating pad into the "heating" port and the humidor into the "cooling" port. The controller will then take over the functions. Set it to whatever temp you want and that's where it will stay.
Im only using heating biy not cooling. Is there anyway i cud have it to only heat up on a certain time. Wud i be able to plug the inkbird controller into a timer.
yes
How can I use it 4 cooling...there is some different between mine and that ink bird in the video.i tried long time u programme it on cooling but icouldnt
just plug a refrigerator or cooling unit into the cooling port. Program the controller and you are set
Hi could you please tell me how I set temp to 18c and 25c thanks
i just set mine up this was really helpful. but the cooling and heating lights are off. is this normal? lol ? i plugged my heat mat into heating though. i want it at 80 for my pacman frog
The cooling and heating light should come on when the parameters that you set are triggered. So if you want the temp to be 80F and you have the heater difference set at 4degrees. Then when the temp drops down to 76f the heater should come on.
@@2guysandacooler Oh okay Thank u:)
I can't get mine to change
I have bought one wifi version. And I keep getting AH ALARM THAT SOUNDS LOUD . IM FOINF HIGH AT 84 LOW AT 80 and sometimes it goes to 84 and AH alarms, I saw you presed SET TO SET ALARMS OFF, BUT HOW TO TURN IT OFF COMPLETELY. thanks for your help
you can't turn it off completely. You best option would be to increase the high alarm to 130f or something like that...
I have this hooked up for one day. It was working fine then at 3 am my wifi was lost for a few minutes and alarm was going off. Is this something that happens all the time ??
What are your alarms set to? High and low's. More than likely the alarm was triggered because the wifi on or off won't affect the alarm
@@2guysandacooler Hey I have High set for 84 deg and low set for 74 deg.heaters set at 82 and the temperature controller I have set for 78.
What are your high alarm and low alarm values? Is that 90 and 40 degrees F?
currently the alarms are set like this:
High temp: 75f
Low Temp: 40f
Are you aware if there is any product like this unit, but that has a clock built in? So that I can request a cooling temp for the day, and a different one for the evening ?
I haven't seen one.
Is there any way to set a night and day cycle so temps will be within a different range at those times?
Dear, sorry that ITC-308-WIFI cannot achieve this function, we recommend you ITC-310T-B(NO WIFI). If have any problem, please feel free to contact our email support@inkbird.com
Hi. Could you tell me what should be all the settings for a cheese cave. ? Thanks
It really depends on what type of cheese you are making but for most cheese you can use the settings in this video. You'll have to monitor the way your cheese cave responds to the settings and make small adjustments as each refrigerator is slightly different. Try to keep the temp at 55f and the humidity at 80%
What happens in a power outage? Does it reset to the entered values?
yes.
Hi
So can u clarify if I have set to 65 with differential of say 5 degrees on either end.. it won't turn on til it hits either 60 or 70 right but then it will stay on to target temp. Is there any way to give target temperature a range? Thanks.
You are correct. In essence by setting the differentials you are giving the unit a range. so if you set the temp to 65f and you give it a 5 differential both ways. Your range become 60-70f. What this unit tries to do is provide an average. So in theory what you set it at will become the average of what the area will have..
If the power goes out to this item does it save or lose the temperatures you set up?
It saves the settings
If you lose power. Do you lose the data info. In other words, does it hold a memory of the info you entered?
yes, it has a memory and holds data
Is there anyway through the app to set up an automated schedule for different times of the day… like for growing plants I want my “nighttime” temperate to be slightly cooler than when lights are on to mimick outdoor reality. I was hoping with the WiFi enabled controller this would be simple, but I cannot navigate my way through the “Tap to Run” setting or the “automation” tab… any help or advice would be much appreciated!
Dear, sorry that ITC-308-WIFI cannot achieve this function, we recommend you ITC-310T-B(NO WIFI). If have any problem, please feel free to contact our email support@inkbird.com
@@INKBIRD-official
Ι have aquestion about refrigerator compressor delay. I use my temperature controller in a small beverage center and only use cooling at inkbird. I have target temperature 55°f and heating/cooling differential 2°f so 57°f until compressor go on again. Now i set the compressor delay for 3 minutes. Does that mean that the compressor will start working again in 3 minutes after i hit 57 or 3 minutes delay since it stoped at 55. When my controller reaches 55 stops .then it takes arround 8 minutes to reach 57 and then right away the compressor starts without 3 minutes delay. Also heating screen is turn on sometimes in the app while i m not using any heating source. I would love to get some clarification right here because i dont know if this is normal or something is wrong with the device.
Thank you in advance.
@@evangelosmakris703 Hello,
The PT compressor delay protection principle is:
When the time interval between two refrigeration operation is larger than preset delay, the equipment will start refrigeration immediately; when the time interval between two refrigeration is less than preset delay, the equipment won't start refrigeration until preset delay is satisfied.
For example PT=3. (Compressor Delay 3 mins)
For the first time, when temperature reached TS+CD, it will turn on the cooling outlet, turn off at TS. It takes 1 min to reach TS+CD again, at this time, the cooling outlet will not turn on, it will wait 2 mins.
So if you set PT=3, when it takes 8 minutes to reach 57 degrees from 55 degrees, then its delay time is reached and therefore at 57 degrees it will turn on the cooling output.
how do i setup a different Temperature for day and night in the app?
This unit can not do that. You would need the ITC608T
Hi , Can i control it from outside for example feom another town ? Or it must be at same wife in home ?
This can be controlled anywhere you go.
I use mine wherever I am in the UK.
How much amperage from a heater can it handle?
Dear, please note that the power range of the ITC-308WIFI is: Max. 10A, 100V ~240V AC. If have any problem, please feel free to contact our email support@inkbird.com
no matter what i set my target heat to, it won’t go above 77. its so annoying. how do i fix that? it lets me set everything then after i do f or c and hit and hold set it just goes back to 77.
Dear, may I ask did you set it up by pressing the button? If you press and hold the set button to save and exit, it also won't save the target temperature setting? If have any problem, please feel free to contact our email support@inkbird.com
What about 90 f
The probes themselves are water proof, just not past the metal tip.
Thanks for the tip. I usually wrap mine in a plastic (sous vide) bag when I submerge it.
Only 10AMPS folks. Don't burn your homes down and try to run high current devices. Certainly nothing like a HEATER OR REFRIGERATOR. I seriously doubt this think will last let alone not burst into flames if used with these. I would hope it's internally fused just incase stupid happens.
How do we turn off temperature alarm?
Set the alarms to extreme temperatures 👍
@@biblical-events Thanks!!
Hello,
first I want to say that I am a big fan of youre show ( I think it is called show, or ??)
love your videos about the starter cultures, but I have a question, I got a frozen bag of Starterculture BactoFlavor BFL-T03.
All I can find on the net, is that it is simular to TSPX, although the flavour side of it.
I want to use it, but don't know if I have to follow the same Ph en Temperatures as you tell about in that video
do you know how to use that starterculture ?? it would be very helpfull.
thanks and keep on the good work.
greetings from Holland
Thank you! Check out this link and go to page 3 (I think). Your range is 65F-85F with 85% humidity for 36-72 hours till your pH hits 5.0-5.2. Use it exactly as T-SPX.
@@2guysandacooler
thanks,
but which link ?
@@alainjanssen9393 LOL... hjemmeriet.com/da/ChrHansen/Brochures/Meat%20manual_UK.pdf
It's page 30. You can read about the type of bacteria. Then on page 20 you can see what each one of the bacteria likes :)
Fahrenheit
How do you reset this device my phone inkbird Pro app doesn't recognize my device. Any help
I don't think you can reset it. Best option would be to uninstall the app, clear the app memory, reboot the phone, and reinstall the app. See if that works. Also are you using 2.4ghz wireless?
@@2guysandacooler Thanks I figured it out. And my house runs off 2.4ghz and 5 ghz or something like that my brother said so mine has both.
@@the6ixconstrictors424 Cool. What did you have to do to fix it?
@@2guysandacooler I deleted the inkbird app from my phone and then added the app back on my cell phone and it works now :)
Basically i want temps 78 for 12hours and 70 for 12 hours
this device will not do that. you need the one that Auber has. It can be programmed to do step temperature
@@2guysandacooler the 306T aint it
Very helpful overview.