@Grandpa's Time hi! The course has multiple pdf files inside, with custom notes that I design. You will have an account through our website. You will have access to all video and support content.
Finally someone who actually explains it from the start to finish, to many skip parts and you don't get the start to finish details. Thanks for the vid
Much appreciated 🙏 thanks for smarter and not harder instructions, I realized instantly when you said tilted sideways and reach up underneath, you are a smart individual sir! Take the whole freaking top off is what every other video has said!!! Thanks man! Although might have been a little bit easier if you would have just gave me a nice clear shot of all them error codes 😀 😉
Here's a concise summary with timestamp links: Entering Diagnostic Mode: Start with the knob at a 12 o'clock angle, then sequence left-right-right-right-left-right to enter diagnostic mode (0:24). Accessing the Tech Sheet: The tech sheet, essential for reading codes, is located at the front of the machine's interior. Instead of removing the top, the presenter suggests leaning the machine back to access the tech sheet (0:37). Reading Codes: To begin reading codes, set the light on "Done" and press the start button. Then, turn the dial to see which lights flash up, indicating specific errors. The tech sheet provides a guide to interpret these flashes, with the first flash representing "F" and the second "E", followed by corresponding numbers that you add together to get the error code (e.g., F6 E6) (1:10). Example Error Codes: The presenter gives examples of how to interpret the flashes. For instance, if "Rinse" and "Spin" light up, you add their designated numbers to get F6; if the next flash includes "4" and "2", it results in E6, making the complete error code F6 E6, which you can then look up on the tech sheet for troubleshooting (1:16). Diagnostic Tests: After clearing or reading the codes, you can put the washer into a diagnostic test mode by setting the knob to "Spin". This runs the machine through all cycles, allowing for manual or automatic testing of different functions (2:37).
Thank you guys for all your support! If this is your first time visiting my channel, be sure to check out the rest of my videos. Also be sure to hit the subscribe button! Thank you and have a great day!
Question: If you have an error code and then erase it without doing the repair, and then run the machine again, WILL THE ERROR COME BACK? I would think it WOULD but it hasn't. I ask because this is what I did exactly and the error NEVER came back. I didn't do the repair yet. Just a curiosity question.
Yes you can clear the codes. It's on one of the setting. I don't have the book in front of me at the time of message, but it will tell you how to reset it.
Hey brother; got a Whirlpool model wtw4815e1 that stops mid wash and holds water. Checked codes and had F1E2 - (motor control fault) Indicates a fault of the motor control section of the main control and F7E6 - (motor fault) Indicates an open clockwise or counterclockwise circuit of the motor. Cleared codes and ran auto diagnostics and it passed twice. Tried washing clothes but stopped again and threw F1E2 Motor control fault but not the F7E6 Motor fault. Cleared washer and codes and ran self test again and passed with no codes again. Why does it pass empty self tests but fail with clothes and what should i check?? Any help is greatly appreciated brother!
Thx only video I found on the exact washer I am trying to fix for my senior neighbor's is there a recalibration video? It 's not draining. I used a nother video and got it to go into diagnostic mode and recalibration and replaced the actiator and it's went through the cycles and then the rinse light stood on and it was making a light humming and slight noise but still not working ahhh help me mr. Wizard.
help!!! i ran diagnostics, but not sure what the lights are telling me. here is the blinking light pattern: sensing, rinse, done, spin. first 3 blink at same time, then spin alone, then repeat. what does this mean?
I have a older model but it still worked exactly the same I was getting a weird error code of f8 e1 or LF but I don’t know how to fix the problem. I’ve already checked and cold and hot water valves are on and the hose is connected correctly
I. Have a washer just like the one in video , obtained it in auction, it will wash and drain but when it begins to rinse the water will run for a second or two then shut down . The rinse light blinks and the door is locked . By researching videos on UA-cam it seems to be a common problem with these machines, even new ones. No videos on a fix for this problem. Have you ever repaired one giving the same trouble ?
If the companies provide the repair manual in the machines for free, why not provide them online so we don't have to tip the machine over or remove the top.
Hi Everyone! Here is the link to the course. www.dcelitetech.com/courses/washer-dryer-flipping-course/.
Are the videos in your course downloadable?
@Grandpa's Time hi! The course has multiple pdf files inside, with custom notes that I design. You will have an account through our website. You will have access to all video and support content.
@@DCApplianceRepair Ah thanks.. I'm out of cell range a lot so wanted to make sure I could download everything.
Finally someone who actually explains it from the start to finish, to many skip parts and you don't get the start to finish details.
Thanks for the vid
Thank you!
Much appreciated 🙏 thanks for smarter and not harder instructions, I realized instantly when you said tilted sideways and reach up underneath, you are a smart individual sir! Take the whole freaking top off is what every other video has said!!! Thanks man! Although might have been a little bit easier if you would have just gave me a nice clear shot of all them error codes 😀 😉
Haha! Welcome to my channel. Thank you I appreciate it. Hope you was able to repair your unit?
@@DCApplianceRepair yea, it was the lid lock. Your video helped a whole bunch. Thanks again!
Ok, but helpful would be linking the repair manual for those of us that need it...
Great video Took me all day to find a video that explained how these codes work. You hit the nail on the head. Thanks
Thank you! I appreciate your feedback.
That's what I've been looking for 6 months. THANK YOU DC!
Your welcome sir!
Here's a concise summary with timestamp links:
Entering Diagnostic Mode: Start with the knob at a 12 o'clock angle, then sequence left-right-right-right-left-right to enter diagnostic mode (0:24).
Accessing the Tech Sheet: The tech sheet, essential for reading codes, is located at the front of the machine's interior. Instead of removing the top, the presenter suggests leaning the machine back to access the tech sheet (0:37).
Reading Codes: To begin reading codes, set the light on "Done" and press the start button. Then, turn the dial to see which lights flash up, indicating specific errors. The tech sheet provides a guide to interpret these flashes, with the first flash representing "F" and the second "E", followed by corresponding numbers that you add together to get the error code (e.g., F6 E6) (1:10).
Example Error Codes: The presenter gives examples of how to interpret the flashes. For instance, if "Rinse" and "Spin" light up, you add their designated numbers to get F6; if the next flash includes "4" and "2", it results in E6, making the complete error code F6 E6, which you can then look up on the tech sheet for troubleshooting (1:16).
Diagnostic Tests: After clearing or reading the codes, you can put the washer into a diagnostic test mode by setting the knob to "Spin". This runs the machine through all cycles, allowing for manual or automatic testing of different functions (2:37).
Thank you guys for all your support! If this is your first time visiting my channel, be sure to check out the rest of my videos. Also be sure to hit the subscribe button! Thank you and have a great day!
This is great - the best tip is where to find that service guide. Thank you!
Yessir thank you!
What does it mean when the fill sensing, wash, spin and done lights are all flashing at the same time?
Question:
If you have an error code and then erase it without doing the repair, and then run the machine again, WILL THE ERROR COME BACK?
I would think it WOULD but it hasn't.
I ask because this is what I did exactly and the error NEVER came back. I didn't do the repair yet.
Just a curiosity question.
Where can I find a booklet with the codes I lost mine tht came w/ my washer
You may can find one online with a pdf file.
Thank you very much.I appreciate your time.
Is there a way to get the techsheet online? The machine is too heavy for me to go under and take it. The model is a WTW4815EW1
You can go to the back. There is 3 1/4 screws. This will allow you to pull the top forward to lift it up. There you can get the sheet that way.
OH and is it like car car, Do you have to clear the codes? or rerun itr teat after new parts are installed?
Yes you can clear the codes. It's on one of the setting. I don't have the book in front of me at the time of message, but it will tell you how to reset it.
How do I check a temperature thermistor on a magtag top load washer
Hey brother; got a Whirlpool model wtw4815e1 that stops mid wash and holds water. Checked codes and had F1E2 - (motor control fault) Indicates a fault of the motor control section of the main control and F7E6 - (motor fault) Indicates an open clockwise or counterclockwise circuit of the motor.
Cleared codes and ran auto diagnostics and it passed twice. Tried washing clothes but stopped again and threw F1E2 Motor control fault but not the F7E6 Motor fault. Cleared washer and codes and ran self test again and passed with no codes again. Why does it pass empty self tests but fail with clothes and what should i check??
Any help is greatly appreciated brother!
Great explanations !*
Thank you so much you solved my problem
Awesome. Thank you
Thx only video I found on the exact washer I am trying to fix for my senior neighbor's is there a recalibration video? It 's not draining. I used a nother video and got it to go into diagnostic mode and recalibration and replaced the actiator and it's went through the cycles and then the rinse light stood on and it was making a light humming and slight noise but still not working ahhh help me mr. Wizard.
help!!! i ran diagnostics, but not sure what the lights are telling me. here is the blinking light pattern: sensing, rinse, done, spin. first 3 blink at same time, then spin alone, then repeat. what does this mean?
During self diagnostic checknit eill run through every cycle individually and how will it tell you who h one ia wrong with them? Thanks
I have a older model but it still worked exactly the same I was getting a weird error code of f8 e1 or LF but I don’t know how to fix the problem. I’ve already checked and cold and hot water valves are on and the hose is connected correctly
Thank you sooooooo much !
You are welcome!
Why did they have to make these damn things "smart" I just bought one of these pieces of shit and I already miss my 15 yr. old washer!
I think the manual is also available online.
Thank you amigo
Yessir your welcome!
I. Have a washer just like the one in video , obtained it in auction, it will wash and drain but when it begins to rinse the water will run for a second or two then shut down . The rinse light blinks and the door is locked . By researching videos on UA-cam it seems to be a common problem with these machines, even new ones. No videos on a fix for this problem. Have you ever repaired one giving the same trouble ?
Any error codes?
Dealing with the exact same problem
Your cold and hot supply might be reversed. Washers I have seen only rinses with cold water.
Good job!!
How do I clear a lid lock code? Everything I tried every minus replacing the 80 dollar connector
Thank DC
Yessir your welcome my friend 👍
where do you get that book at?
I have a brand new machine it does great until it gets to spin and done but won’t do it I manually have to make it spin
If it's under 1 year warranty call on it. Are you getting any codes?
I just replaced the lid lock and the lock light is still flashing???? Help
Are you able to put it in test mode?
I am confused about the e part of the lights
When you read the lights for F than E part of the light getting confused
Your first blink of light is for F the second blink is E.
@@DCApplianceRepair thank you
Good stuff man. Thanks
Thank you! You are welcome!
Damn bro I didn’t know I was going to have to do math
Having trouble my washer doesn't wash properly and it makes noise
It only makes the noise when its washing but it's not washing
It. Could be several things. Gear case grinding. Bad bearings. A piece of clothing maybe stuck between tub.
Ok thank u I will check it out
I don't get the code reading part?
Where do you find the diagnostic sheet?
It is in the video on how to locate it.
Plastic JUNK from Whirlpool! The Speed Queen "classic" washer model: TC5 is the ONLY washer on the market worth purchasing! It's a 30 year + washer!!
Doesn't work on mine.
If the companies provide the repair manual in the machines for free, why not provide them online so we don't have to tip the machine over or remove the top.
Please help
WTF is this guy for real?
Huh?
THE BODHI12345