He really knows what he's talking about and it's logic at all ! Most of the time when my girlfriend's chevy cruze 2015 RS have that F**** StabiliTrak pop up on the dash, the Economy battery pops too at the same time. It means the voltage is at the lowest. I've changed almost everything. Exhaust manifold, map sensor, motor cover, Maf sensor, Catalystic, prestone tube and waterpump (Thinking about maybe it's overheating causing that engine to jumps up and down crazy, but at least that's a common problem too in cruze) Right now I've just purchasing the ground cable, the voltage sensor and a new coil pack to see if it fix on my side too, Will be back on comment if it works for us too.
I tightened the front grounds, disconnected negative battery terminal cable to clear engine light and used my new spare key..so far so good.."junk car"
I have a question I have a 2013 Chevy Cruze my car just cuts off for a short second and then when it comes on it says service stabilitrak and goes right off. No engine light or nothing when I use the code reader no code comes up where do I go from here
I would hazard to guess that it is a ground issue. Be it the negative battery cable or other grounds coming loose. If the negative cable hasn't been replaced yet, do that first. Then follow the rest of the steps in the video to try and pin it down. If it isn't throwing any codes, I wouldn't think it is coming from the coil. It would also be advisable to take your car to an auto parts store and get a load test run on the charging system just in case.
He really knows what he's talking about and it's logic at all ! Most of the time when my girlfriend's chevy cruze 2015 RS have that F**** StabiliTrak pop up on the dash, the Economy battery pops too at the same time. It means the voltage is at the lowest. I've changed almost everything. Exhaust manifold, map sensor, motor cover, Maf sensor, Catalystic, prestone tube and waterpump (Thinking about maybe it's overheating causing that engine to jumps up and down crazy, but at least that's a common problem too in cruze) Right now I've just purchasing the ground cable, the voltage sensor and a new coil pack to see if it fix on my side too, Will be back on comment if it works for us too.
Finally found a person who knows what he's talking about. Thanks
I don't know if I would go that far. But I know enough to be dangerous.
Thank You! Most of the other videos on this issue do not address the electrical system.
No problem
Thank you
No problem
You’re awesome thank you
I merely do what I can.
I tightened the front grounds, disconnected negative battery terminal cable to clear engine light and used my new spare key..so far so good.."junk car"
I have a question I have a 2013 Chevy Cruze my car just cuts off for a short second and then when it comes on it says service stabilitrak and goes right off. No engine light or nothing when I use the code reader no code comes up where do I go from here
I would hazard to guess that it is a ground issue. Be it the negative battery cable or other grounds coming loose. If the negative cable hasn't been replaced yet, do that first. Then follow the rest of the steps in the video to try and pin it down. If it isn't throwing any codes, I wouldn't think it is coming from the coil. It would also be advisable to take your car to an auto parts store and get a load test run on the charging system just in case.
Right now I have all 3 power steering stablia track and traction control. I just changed the ground to a brand new ac delco one and it's still bad
Disconnect the negative for 30 minutes to let the computer reset. Than check and see if you have the same issue.