How to Diagnose and Repair Jandy LRZ Flame Failure Step by Step Instructional Guide for Technicians
Вставка
- Опубліковано 5 жов 2024
- This step by step instructional video is designed for the authorized technician the procedures on how to diagnose and make the repair. As a licensed master plumber and HVAC contractor my company and I have the opportunity to service, repair and install pool heaters. During this video, our clients Jandy LRZ325 giving ignition failure error and not heating the pool.
Mikey Pipes Uncensored: / @mikeypipesuncensored
New oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
As of 8/3/22 - Pipe Doctor & Bosch short sleeve shirts are available in Medium & Large.
Minimum donation of $23 is appreciated. Or (2) for $40 delivered.
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Plumbing
80 E Hawthorne Ave
Valley Stream, NY 11580
Join our team! We are expanding to the great State of South Carolina! Email me: mike@mikeypipes.com your interest. Relocation assistance is available!
#poolheater #mikeypipes #jandyventura
swimming pool heater repair pool heater failure pool heater troubleshooting pool heater repair
Well done, Sir…..love your method of attack in your investigation/diagnosis! By the way, that client is great! He should have his own UA-cam channel!
@@PipeDoctor 👍
Don’t forget to check the manifold pressure after you install gas valves and clock the gas meter not to mention check for gas leaks and safe combustion.
Most people skip these steps but it’s always done on every job regarding a fuel burning appliance because it is the correct way servicing gas appliances and needs to be documented like this in case of a legal disputes. Not too many techs or repair guys have done a video on proper word documentation for the work you just did.
Great Video keep up the good work ! 👍🏻
Having the proper tools, makes all the difference. Great Video Mikey Pipes
I needed a video like this with heat season coming up and dealing with furnaces everyday! Good stuff man!
Amazing video. Very well broken down. Thank you for explaining some safety items as well, per the gas piping threads, etc.
Those are always my favorite kinda customers, where they like to talk s#it and mess around before we get to work 🤜🏻🤛🏻
Found this video educational, entertaining, and enjoyable. Thanks for sharing.
You're the expert, fix the fugging thing. 😂
I like the fella. 🤪
You don’t see this anywhere else! 👍👍
Another Great Video, Hello from New Brunswick, Canada
THANK YOU FOR YOUR VIDEOS!!!
you're a damn Saint. I've learned so much in a small amount of time.
Always doing a great job!!! Great Videos!
Great info Mikey ... Thx for teaching the young techs ...
Grab the Mapquest Mikey
Nice video! Really helpful walkthrough
Good job Mike.
Well done.
Another good video with good info & i learn something new every day. Stay safe
You have Bueno!!!
Another great video and always learn a lot so thank you !!
Great stuff bro.
Snacks with facts!
Stay safe.
🍺🍺🍺🥃🥃👍🏻
I get 24v for like 2 seconds then 0 volts. Does that mean something? 😅
This was such a solid video
What should I replace if I am getting only 17 volts out of the ignition controller instead of 24v?
check for shorts
Educational video, thanks Bro!
Great informative video again.
8:48 this voltage test should be carried out with the gas valve hooked up and leads also hooked up. Testing open circuit voltage can be misleading. Without a load on circuit it could. Pass voltage and not be able to pass amperage.
I see you have another pipe doctor lol. To bad he does not know what we do. We already know what the problem was before testing... 🙂
Lets Go Eddie (Brandon)
Just because someone has done something for 30 years does not mean it's right. Always should try to learn something.
good point, because the control/ignition box/relay may be failing and lull you into thinking it's fine. then it's whoops new gas valve and it still doesn't work or only works intermittent.
been bitten that way plenty in the past with all sorts of different electronics and control boards. oven, fridge, washer, tv's, radios, vehicle parts, the list goes on!
Mikey, what manometer do you recommend for entry level tech on a budget vs I might have a couple bucks for a better one. Asking for a friend.
Is homemade a reliable option ?
if you do a lot of furnaces with pressure switches, you may want to get the more costly (3 port) model with air pump. for sure if you'll be using any universal pressure switches you have to set and choose the right parts(they're a pain in the nutz)
Step 9 check gas has pressure
Swell , teach on sally
👍👍
👍
Crazy people heat their pool when there's been a heat wave for 5 weeks straight.... tell me I'm wrong
@@PipeDoctor those people are crazy 🤣
I had solar heat on my pool in Vegas.
@@PipeDoctor
Added a month and a half to each end of the swim season. It could keep 87 degrees from mid March to mid October. You'd be surprised how much heat is lost at night to evaporation. In Vegas you never close the pool. If you can stand 55 degree water you can swim in December/January. Our realtor used a wetsuit in the cold season.
@@scott_meyer 55 degrees? Nope! Not for me. What’s the OAT?
@@MikeyPipesUncensored
OAT?
You could have gotten fooled by measuring the 24 volts with no load.
I've been watching the auto diag guys mention this a lot and getting fooled. They mostly use light bulbs for a load.
She's not a leaka momma. She's constipated.
Mickey F-ing Pipes
Useless with excessive commercial