I agree the speed that they do these stunts is almost useless and you could literally rotate the video in post editing instead of this super fast flip. I find it almost pointless and a gimmick. It's going to get old really fast seeing the same effects over and over and over the exact same way as the same speed.
Hello. You can check if you have the following conditions: 1. Easy ACRO cannot be enabled in the following situations: a. A video is being recorded. b. Head Tracking is enabled. c. The drone is controlled by using DJI FPV Remote Controller 3. d. * Easy ACRO is available only in N mode. For details about the precautions for using Easy ACRO, see the "Easy ACRO" section in the DJI Avata 2 User Manual. e. * If the U0 firmware does not support Easy ACRO or the Easy ACRO option is unavailable, kindly update the firmware. 2. Before performing Easy ACRO actions, be sure to keep the surrounding environment obstacle-free for the sake of flight safety. · Easy ACRO does not work in the following situations: a. The drone is taking off, braking and hovering, landing, or returning to home. b. The drone is flying in Sport mode. c. The battery level of the drone is below 25%. d. The drone is flying less than 1.5 m above the ground. e. The drone is flying on windy days when the wind speed exceeds 10 m/s. f. The drone is performing poorly in positioning, with GNSS Vision Positioning disabled. g. The drone is flying in a restricted zone or the drone reaches the max flight altitude or distance. · It is necessary to increase the drone altitude when the drone is performing actions (such as rapid turns and sharp acceleration or deceleration) that may change its attitude angle. Otherwise, Easy ACRO may not be available.
The fact that it comes with easy acro on the RCM3, does inspire a bit more confidence than the original. If it flips and rolls in RCM3, then manual via FPV3 should be a solid improvement too.
I read in the manual that the drone does not record footage when Easy Acro is active. Can you deny this news? If that were the case, it would be a useless function.
Hello, there. Thank you for your feedback. Easy Acro can not be enabled when recording video. You can enable the Easy Acro first and then enable the recording.
Hello, there. Sorry for the inconvenience. The country and region will be determined according to the GPS, and then switch between FCC, CE, and SRRC in accordance with local laws and regulations.
Easy Acro is cool but it will be even cooler if we can change the duration of the roll for a couple of seconds more.. Hope an update will come.
Or just learn acro, those filps, rolls and drifts are super easy once you know how to fly acro and you can do them however fast you want them.
@@jonathan6351 You're right, I know it's a taste for beginners... But a quick update for speed would be awesome..
I agree the speed that they do these stunts is almost useless and you could literally rotate the video in post editing instead of this super fast flip.
I find it almost pointless and a gimmick.
It's going to get old really fast seeing the same effects over and over and over the exact same way as the same speed.
@@JohnDoe-xk8iy totally.. The 180 Drift is perfect, super useful for many scenarios, but the flips are way too fast...
Flips and Rolls are so easy and doing it assited does not get you anywhere
Hi. Is the Easy Acro mode available everywhere? Or do I need to purchase the Remote Controller to be able to use it?
Thank you for a nice and clear explanation
Is it available in d-log or just normal color profile?
on my avata 2, in the shorcut menu, there no option easy acro, how can i fix it ?
Nem no meu
these instructional videos give me north korea vibes
Super cool
Can you record while using easy acro?
can i do it with dji controller?
Easy Acro is not available for me when recording and not recording. Any update on this?
Hello. You can check if you have the following conditions:
1. Easy ACRO cannot be enabled in the following situations:
a. A video is being recorded.
b. Head Tracking is enabled.
c. The drone is controlled by using DJI FPV Remote Controller 3.
d. * Easy ACRO is available only in N mode. For details about the precautions for using Easy ACRO, see the "Easy ACRO" section in the DJI Avata 2 User Manual.
e. * If the U0 firmware does not support Easy ACRO or the Easy ACRO option is unavailable, kindly update the firmware.
2. Before performing Easy ACRO actions, be sure to keep the surrounding environment obstacle-free for the sake of flight safety.
· Easy ACRO does not work in the following situations:
a. The drone is taking off, braking and hovering, landing, or returning to home.
b. The drone is flying in Sport mode.
c. The battery level of the drone is below 25%.
d. The drone is flying less than 1.5 m above the ground.
e. The drone is flying on windy days when the wind speed exceeds 10 m/s.
f. The drone is performing poorly in positioning, with GNSS Vision Positioning disabled.
g. The drone is flying in a restricted zone or the drone reaches the max flight altitude or distance.
· It is necessary to increase the drone altitude when the drone is performing actions (such as rapid turns and sharp acceleration or deceleration) that may change its attitude angle. Otherwise, Easy ACRO may not be available.
Maybe Joshua Bardwell and Ken Heron will be able to do tricks without crashing now!!
Why can’t I use acro with the controller 3?
Same on me
Cool!
The fact that it comes with easy acro on the RCM3, does inspire a bit more confidence than the original. If it flips and rolls in RCM3, then manual via FPV3 should be a solid improvement too.
No meu drone não aparece essa função! Como faço?
I have the same issue, did you find a fix
I cannot find the easy acro option in the shortcut menu
Me too… where can i find them??
Firmeware update then it appears
Good luck
I don’t have an easy acro icon.
I don’t have the feature either
DJI please add cliff dives to easy acro 🙏🏻🙏🏻
I read in the manual that the drone does not record footage when Easy Acro is active. Can you deny this news? If that were the case, it would be a useless function.
Pretty sure you can capture video while in easy acro mode. I've seen a bunch of UA-camrs with easy acro clips in their vids.
Hello, there. Thank you for your feedback. Easy Acro can not be enabled when recording video. You can enable the Easy Acro first and then enable the recording.
how come I don't have easy macro mode?
I don't have it either, have you found a solution?
I updated the firnware
@@surgfish only goggles or the drone?
Parece um tello😂
Seems complicated.
Please ensure Turkish language support on devices with new updates.
We don’t need Easy acro drones, we just need powerful fpv drone. Its that simple.
What about giving us the option to switch between CE and FCC? Who cares about "Easy Acro"?
Nah bro that won't happen lol 😂
I second this
@@samtsen0831 Then people anyway find a way around it so what's the point?
@RockFPV could that void warranty?
Hello, there. Sorry for the inconvenience. The country and region will be determined according to the GPS, and then switch between FCC, CE, and SRRC in accordance with local laws and regulations.
😂lol