무타공 섬프수조 오버플로우 만들기 2번째 Diy Aquarium Overflow System
Вставка
- Опубліковано 6 лип 2020
- 한시간에 약 3,000L 물 순환용 오버플로우
3,000Liter / Hour Overflow
4자수조 이상 무타공으로 오버플로우를 가능하게 해주는
오버플로우 파이프 만들기 입니다.
섬프수조는 4자 이상에서 효과를 발휘 할 수 있습니다.
4자 이하 사이즈의 수조는 외부여과기나 상면여과기로 충분히 커버가 가능하기 때문에 본 영상에서는 4자 수조 이상에서 사용할 수 있는 무타공 오버플로우 만들기에 대해 알아보겠습니다.
사용 재료
*유리 5T (Glass 5mm)
150x80mm 2ea
110x160mm 2ea
110x80mm 2ea
80x80mm 2ea
80x60mm 1ea
80x30mm 2ea
*PVC 20A 파이프 (PVC 3/4" Pipe) 1m
myoung119.com/goods/view?no=1091
*PVC 20A 후드밸브 (PVC 3/4" Foot valve) 1개
myoung119.com/goods/view?no=9...
*PVC 20A 탱크피팅 (PVC 3/4" Tank Fittings) 1개
myoung119.com/goods/view?no=1156
*PVC 20A 90엘보 (PVC 3/4" 90 Elbow) 2개
myoung119.com/goods/view?no=682
*PVC 15A 파이프 (PVC 1/2" Pipe) 1m
myoung119.com/goods/view?no=1091
*PVC 15A 탱크피팅 (PVC 1/2" Tank Fittings) 1개
myoung119.com/goods/view?no=1156
*PVC 15A 밸브소켓 (PVC 1/2" Valve Socket) 1개
myoung119.com/goods/view?no=674
*PVC 15A 볼 밸브 (PVC 1/2" Ball Valve) 1개
myoung119.com/goods/view?no=3326
*26,32,38mm 홀쏘 (Hole saw bits)
*5,32,38mm 유리홀쏘 (Glass hole saw bits)
*에어스톤(Air stone), 아크릴판5mm(Acryl 5mm), 실리콘(Silicone)
PVC본드(PVC Bond)
네이버 "대한민국 버터플라이 코이" 카페 개설
cafe.naver.com/buflko
감사합니다. - Навчання та стиль
와 별걸다 만드십니다,,,꿈도못꿀일들같은데.뚝딱뚝딱,,,멋지네요
감사합니다.^^
정말 금손이시네요ㅎㅎ
와우~~~ 또다른 작품이 완성되었네요 ㅎ 유리타공보고...바로 전 그냥 감상모드로..ㅎㅎ
^^ 감사합니다. 유리타공은 생각보다 쉽더라구요. 어렵지 않습니다.
Mind Blowing !!!!!! You are amazing my friend........
What a vast improvement on all other overflows shown on UA-cam........
알아보기쉽게 투명으로 만들아주셨는데도 어렵네요ㅜㅜ 대단합니다!
감사합니다.
I'm really liking your DIY projects, they have a very professional look to them, really well thought out and executed.
Thank you.
Спасибо! Очень понравилось Ваше видео. Всех благ и удачи!
버플코님의 거침없는 자작과 현란한 동작과 그걸 지켜보는 나~ 그건 아마도 대리만족 타임. 난 행복하니깐 애정하니까 버블코님에게서 힐링할거야ㅋㅋㅋㅋ 죄송
ㅋㅋㅋ 임재범 노래가 소환되는 글이네요. ^^ 좋게봐주셔서 감사합니다.
이번것도 대박이네요
^^ 감사합니다.
역시 대단하십니다 !
감사합니다
와우 사각 유리라 이쁘기도하고 멋지네요...무타공 이라 전 섬프라 다음 어항에선 꼭 해보고싶네요...
물생활1일차 감사합니다. ^^
Great design, i'd pay for this.
대단하네요..
В тонкую трубочку попадает или заползает улитка и вода выливается из аквариума затопив помещение, отличная идея и никаких предохранителей и защиты от перелива при засорении тонкой трубки...
Un trabajo espectacular
Thank you so much
Looking works good thanks for shared my friend
Wow nuce design better than any other on yt!
sos un groso, te felicito
👍🏼 great! thanks for share!
버플코tv님이 알고리즘을 어서 타야하는데 말이야
그나마 한두번 타서 여기까지 온겁니다. ^^ 감사합니다.
Thanks for this video it’s helping me a lot
Thank you
Nice. Going to try it
대단하십니다. 저는 똥손이라 보는걸루 만족~ㅋ
^^ 감사합니다.
excelente trabajo saludos desde México
Gracias.
점점 발전해 나가네요.. 대단하십니다.^^
감사합니다.^^
Look for work 👍 my friend very nice... safety all ways ... God 🙏 bless you
Wow.. really nice work bro... tnx for the upload..! 👍💖
If you run the hose into the bottom of a sump compartment and let it overflow into a filter sock compartment it will be a lot quieter.
Thank you for your advice.
Yep, I've been using the dump tank method for years. I always have a chamber in the front of my son that has absolutely nothing in it except for a bag of crushed coral for equalizing my pH my overflow runs into that below the waterline to silence things and then flows over to my socks chamber.
좋은
Молодец! Золотые руки!
Спасибо.
I sow many overflow UA-cam clips , Yours is the best! Even though it is in an oriental language I do not know. Thumbs up , from the bottom of my heart. One thing I would do different is to build from Plexiglass or PVC Glass 5mm thick (a new transparent PVC material , much better than plexiglass but it cost some $ if you use this PVC transparent material, you DO NOT need bulkhead fittings , you glue straight to the PVC Transparent box using PVC glue (Tangit PVC-U Adhesive). I Built mine after seeing your UA-cam. Glass is Breakable, cumbersome and heavy, but if I knew how to cut glass as FAST you , I might have chosen glass...
👍 looks great
Thank you!
Hello
Thanks for your idea that you shered with us is a much easier to build than pvc pipes overflow and I think its safer ,the posibilites that in this sistem will apear breakdowns because the siphon gets fals air somehowe its very limited, but and here is the question: wich piece give you the water level in the thank? thanks kindly for the answer.
Thanks dude.its so helpfull design
Thank you!
Wow amazing
Man appreciate your video but it's really hard to make and all the tools needed is just insane. I would love to buy it if someone can make it for me lol.
아니 이형님 집에 없는게 없으심 ㄷㄷ
ㅋㅋㅋㅋ 하나하나 사 모은겁니다.
How nice, but I have a question, there's a small hose to attract water, is the surface level the same as the height of the water reservoir in the overflow box?
Buenas tardes amigo. Una pregunta para que es eso?
You also have solutions, even for marine aquariums
Nice share
Nice!
Nice😀
if I set the foot valve long to the bottom. is there a problem?
I didn’t understand how it started to work automatically after the pump had been turned off and turned on. Someone can explain?
Cool
I have a question, it is based on something that happened to me when I turned off the return pump, the water continued to drop, much more than the breaking point, why is this happening and how can I solve it? I don't know if the height has something to do with it of the aquarium or what could be the problem.
is it posisible to use a smaller pipe 1/2'
탱크 내부의 흡입 파이프 길이를 늘릴 수 있습니다. 그렇지 않으면 항상 상자 베이스 위치에 있어야 합니다.
auuuu meus zóvos!
5mins in imma like f that I'd just buy one
Where can i buy one of these over flowes
That is perhaps too much efforts putting into it. I would prefer a three chamber overflow system built into the tank.
why use different size in inlet & outlet? or rather why the smaller size in outlet? why not use 3/4" size all throughout?
첫번째 diy도 좋았는데 유리로 제작하신 이유가 따로 있는지요?
cakep si om , cuma nanti kalo udah mulai lumutan dan banyak kotoran kaga bisa di bersihin...
실력이 대단하시네요 혹시 섬프 입출구셑 판매도 하시나요? 외부 여과기 사용중인데 영상보고 섬프로 바꾸고 싶어지네요~
이제 사업길로 가시지요 ㅋ
One question, how do you resolve the siphon effect if the inlet are made closer to the bottom?
smart
Great job, congratulations. I have a question: How many liters per hour or gallons per hour can this overflow drain? Are 3 thousand liters per hour ??? Thanks for your attention.
Liter for hour 5,000L
@@buflko wooo, really cool. Where did you learn this technique? Many thanks for the reply.
Thank you
안녕하세요
ㅎㅎ대단하십니다
영상잘보고갑니다
혹 새로운 저면여과박스
개발해보시죠?ㅋㅋㅋ
수고하세요
^^ 저면 여과박스 검색들어갑니다. 감사합니다.
Awesome job! But the more I watch $100.00 is worth not building it myself Hahaha
옹 이번에는 유리박스!!
에어호스가 저렇게 작동하는군용
하지만 항상 따라하기엔 난이도가ㅠ
^^ 감사합니다.
How many liter/h?
is it a QUIET Overflow. ????
What name intro music?
thank so much!
I want buy this
👍👍👍👍👍👍👍👍👍👍👍👍
WAW...VERY SMALL AND EFFICIENT :)
THANK YOU FOR SHARING :)
I DID A THUMB-UP ABOUT THE VIDEO AND SUBSCRIBE TO THE CHANNEL :)
THANK YOU FROM ISRAEL :)
intro song?
안녕하세요~
솜씨가 대박이십니다^^
여쭤볼 게 있어서요
이 방식으로 해수 어항도 가능한가요?
네. 해수에서도 사용가능합니다.
@@buflko 넵 감사합니다
해수 어항도 기대할게요~^^
I want to buy or design complet ?
Para que sirve
Wahat song ??
궁금한게 있어 댓글남겨봅니다.
박스는 공기유입이 안되야 제대로 작동하는거죠?
아크릴 절단하면서 살짝 빈틈이 생기는데 일단 누수는없어서
다 만들고 작동시험하려니 호스로 물을 빨았을때
입수가 안되더라구요..ㅠㅠ
아크릴로 만드셨으면 아크릴 접합부에 틈이 없게 만드셔야합니다. 공기가 유입되는 순간 제기능을 못합니다.
버블코님 유리대신에 아크릴도 가능할까요??
네..아크릴도 물만 안새게 작업한다면 가능합니다.
Love your channel, however I can't stand your intro music. Every time one of your videos starts I feel like I'm getting ready to watch an episode of Vampire Diaries LOL
Ok! I will not use it in the next video.👻👻👻
버블코님, 오버플로우 입수구가 더 아래로 내려가는건 안되나요? 바닥에 있는 물을 끌어오게요
파이프를 바닥에 내려오게 제작하셔도 됩니다.
👍👍👍👍🐠🐠🐠
😁😁😁😁😁😁
whether the position of the foot valve can be placed at the bottom of the aquarium
No.
@@buflko is there another model that can be used for that
I want to ask, how diameter pipe 3/4" ??
2:03 Note please.
what is opening music called?
I'm sorry. Did not find.
도..도면 좀 구할 수 있을까요 ㅠㅠ?!
nice job but.... dude... why?
Quấn băng tan ngược rồi
Я что-то не понял, этот узбек на видео, орудует дихлорэтаном без перчаток ?
Song name at 9:10 ?
I need help, I created this but mine does not siphon back once it initially breaks the siphon after a power outage.
Hello, have you fixed it? Or did u use another technique. Can u please share? I am looking for a solution too and your reply would be appreciated.
@@krg1231 No. I drilled my tank instead.
@@Roy-sj8sw After a lot of research i am planning drilling them too.
@@krg1231 It is better that way than waking up to a flooded floor and a broken pump after a power outage
I think the end of siphon tube which is in glass must be slightly lower than the water entrance part of foot valve. 13:05 , 14:35
이거만들어 사고싶은데요 ,어떡해요?
혹시 주소어디에요?
오버플로우가 무슨원리죠
간단하게 사이펀 원리라 보시면 됩니다. 근데 계속 물이 내려가지 않고 어느지점에서 물을 끊어주는걸로 이해하시면 될겁니다.
Tolong kasih tau d awal video itu lagu apa ????
Plase what song in video music ??
Sorry. I forgot what kind of music it was.
😔😔
만들어서 판매하실 의향은 없으신가요?
네..판매는 못 할것 같습니다. 일하고 병행하기가 넘 힘들어요..ㅋㅋㅋ
재료는 어디서 구매하셨아요? 저고 무타공 오버플로우가ㅜ팔요합미다 ㅠㅠ
재료는 명인코리아 보시면됩니다.
@@buflko 정말 감사합니다.
정말 훌륭하신 기술에 항상 놀랍습니다. 전기기사일을 하고 있지만 정말 기술적인 능력을 볼 때마다. 숙연해지는 영상입니다. 많이 배우고 갑니다. 감사합니다
@@MinimalCycle 아닙니다. 전 그냥 만드는거 좋아해서 이것저것 해보는것 뿐입니다. ^^ 혹시 오버플로우를 만드신다면 아래 디자인으로 만드시는게 더 쉽고 간단합니다.
제가 6개월동안 쓰고 있는데 괜찮습니다.
@@MinimalCycle ua-cam.com/video/CtmW5vmfMDA/v-deo.html
ни хрена ни чего не понял !!повторите пожалуйста !!!!!