Nine looking Cummins u got there buddy!! U got her looking some sexy. Nice choice in parts. I was Just wondering if u no about extended idil? and if u r idling r trucking for any amount of time it’s better to bring the rpm’s up to at least 1100. I love watching ur videos and like how u r always taking good care of it. So that why I said something about over idling our trucks. If u take ur truck to a dealership they can do a reflash and update ur truck. I’m not sure but I don’t think it gets cold enough for u to need the 3 cylinder high idil but no matter when or where u r it’s always better to bring ur rpm’s up over the 1000 mark.
I'm about to upgrade the stock elbow intake on my Cummins and was wondering if there is a particular reason why you went with the banks? thanks love the videos
ParoDoXz how much of a difference did you notice? I just ordered this for my 7.3L powerstroke. I have already upgraded the turbo and intercooler. Thanks brother, love your videos and the Army shirt.
I noticed you STILL have your stock fuel filter canister mounted on your intake plenum even though you have a FASS that bypasses it. If you want to clean up the engine bay a little, you can pull it off and buy a dummy plug for the "water in fuel" sensor. Just fuel for thought brotha
So does it matter how much bigger the pipe is if the outlet feeding it is 3” ? No matter the pipe diameter as long as its exceeding 3” , it can only flow 3” of volumetric air. However the resistance is lessened by said larger pipe thus decreasing the viscosity n speed of air when entering your manifold. All pressure has dissipated upon entering a larger volume area. Boost will suffer , n overall power will be lost. Amazing they’ve sold so many 😔
ParoDoXz yes big fan of your truck a lot of my buddy's have diesels but yours is way cleaner then any of there's lol (cleaner mean nicer) lol bet it will sound a little louder too with more air flow !
I had a feeling that stock intake would be getting canned soon with all the mods your doing. Remember to take your girl out for a good date with all the money you've been spending! She might get mad (or already) if you don't.
Sorry to be so short bro. When you put the monster ram elbow in and add that spacer underneath.. someone was saying that you lose your heater for inside the cab!??
What are your overall goals with the truck? I don't want to come off as a hater but it looks like you're spending a lot of money on unnecessary parts. I daily drive a 2001 24 valve that runs 11's with a lot of stock parts under the hood. I like the channel and you're doing a great job on the videos, but it looks like you're getting some bad information from your commenters.
ParoDoXz I got you. What I'm tryin to say is many of these parts don't need to be replaced at that power level. A BHAF is capable of big hp and is $200 less than most CAIs, stock intake elbow handles big power just fine, stock replacement vp will support 700hp for $700 less than a hot rod pump. All of those upgraded parts make no noticable difference at your power level. If you're trying to make it look cool under the hood then keep doing your thing. I personally think money would be better spent on other upgrades that make a difference you can feel, a valvebody and traction bars for example. Again, not hating, just trying to make sure you're going the right direction. I bought my truck bone stock 2 years ago and saved a lot of time and money on my build talking to the right people.
+ParoDoXz They really aren't as bad as people say they are, I tow every day I just service it every 12k and its fine. You can use the power as long as the trucks moving, I dont think launches would be a good idea lol.
I have the same intake elbow. Love it. When my. Vp44 took a dump on me I upgraded to the same pump you got. 70k miles later and we're still running strong. Don't think you'll be sorry for spending the extra money.
You invested a lot of money in streamlining air into that cummins, but you left the single most restrictive element in it. Get that grid heater out of there!
have you noticed a difference since installing the banks monster ram and boost elbow. I've been considering changing my stocker out and was wondering if it's worth it. Thanks man! keep up the great work!
I installed one of these on my 04 2500. Seen zero improvement. $500 for nothing. If your going to spend your money on boost elbow, get you a $50 part off eBay. If you want improvements upgrade your turbo
You are way too concerned with scratching the paint. It's a truck bud, and it's a powder coated cast piece. Not gonna hurt it. Makes me sad that you're more worried about how good it looks in the bay rather than the gains you'll see.
can't wait to hear it. been waiting to long to hear with all the upgrades
Twiztid Juggalotus That video will be out tomorrow man!
It's been to long
at 8:44 its not your power steering fluid, its your brake fluid!
Damn dude that's been in my mind what that was in the box!! Looks real SWEET sitting in the engine bay like that!
Corey Fontenot Yeah man it looks good! Thanks for watching!
Corey Fontenot That video will be out tomorrow!
Nine looking Cummins u got there buddy!! U got her looking some sexy. Nice choice in parts. I was Just wondering if u no about extended idil? and if u r idling r trucking for any amount of time it’s better to bring the rpm’s up to at least 1100. I love watching ur videos and like how u r always taking good care of it. So that why I said something about over idling our trucks. If u take ur truck to a dealership they can do a reflash and update ur truck. I’m not sure but I don’t think it gets cold enough for u to need the 3 cylinder high idil but no matter when or where u r it’s always better to bring ur rpm’s up over the 1000 mark.
can't wait to see what she's gonna do
Chris Pastuf Video will be up tomorrow! Thanks for watching!
Np, you gonna get it on the dyno?
I'm about to upgrade the stock elbow intake on my Cummins and was wondering if there is a particular reason why you went with the banks? thanks love the videos
Waiting at the ready for all your vids haha, thanks for putting another awesome vid up!
Dominic Forrer I appreciate that man! Thank you!
How come you didn’t get the Black color to match the valve cover.?? Red looks sick though.!!!
You need some power tools dude! That intake horn is a 2 minute job with a good electric 3/8 impact. Lookin good tho.
Quentin Fontenot Send your boy some money lol
Haha i feel ya. I just put an s369sxe on mine and wasted the vp on the first run:(
Quentin Fontenot stock VP? Any lift pump ? Why did it trash it
looks good on there. nice little upgrade to the truck.
Big Murph Thanks bro! I think it looks great
That was my question how hard is install i got all tools and aircompresdor
Did you notice any difference after you installed the new intake ?
awesome video, great info .. and I love the ghetto vibe !!
keep up the good videos parodoxz
Thanks man! I will!
Did you notice an air noise while applying throttle?
Cant wait too see the start up video tomorrow!
Glicks Auto Body 👌
The "power steering" you mentioned is actually the master cylinder, for the brakes.
Actually it is the powersteering. It's called a hydroboost.
Your power steering and vacuum pump are under the injection pump and gear driven.
Thats whats up man keep it up, subbed and looking forward to hearing her
Thanks for the subscribe bro! I appreciate that! Video will be up tomorrow!
ParoDoXz how much of a difference did you notice? I just ordered this for my 7.3L powerstroke. I have already upgraded the turbo and intercooler. Thanks brother, love your videos and the Army shirt.
I noticed you STILL have your stock fuel filter canister mounted on your intake plenum even though you have a FASS that bypasses it. If you want to clean up the engine bay a little, you can pull it off and buy a dummy plug for the "water in fuel" sensor. Just fuel for thought brotha
Spencer Leyendekker I know man, I'm gonna keep it there though, just in case I ever need it
After installing the elbow Have you noticed faster turbo spool?
Good to see you building the motor bud this things gonna rip
Cole G Yeah it is man!
ParoDoXz have you started it
Awesome video man you are awesome
Sem Verpaalen Thanks for the support on the channel and watching early!
So does it matter how much bigger the pipe is if the outlet feeding it is 3” ? No matter the pipe diameter as long as its exceeding 3” , it can only flow 3” of volumetric air. However the resistance is lessened by said larger pipe thus decreasing the viscosity n speed of air when entering your manifold. All pressure has dissipated upon entering a larger volume area. Boost will suffer , n overall power will be lost. Amazing they’ve sold so many 😔
Hey man where did you get your vp44 at? Mine took a shit today.
Austin Adams industrial injection
Austin Adams True 👆
Base housing?
Did u leave ur hot side pipe stock?
can't wait !!!
alejandro munoz Tomorrow's only a day away haha
ParoDoXz yes big fan of your truck a lot of my buddy's have diesels but yours is way cleaner then any of there's lol (cleaner mean nicer) lol bet it will sound a little louder too with more air flow !
Thanks man! I appreciate that!
nice can't wait
Joe Buchanan Me either man! Video will be up tomorrow!
That "Down Pipe" isn't what it's called. It's called a "Boost/Charge Air Pipe" or Boost Tube! ;) Nice video!
Do I have to have a bigger turbo to install one of this?and do I have to do a heater grid delete?
Can it lower egt’s?
I had a feeling that stock intake would be getting canned soon with all the mods your doing. Remember to take your girl out for a good date with all the money you've been spending! She might get mad (or already) if you don't.
tedtronsen I got that under control haha
when's a bigger turbo coming man?
david cox Hopefully soon! Just very expensive haha
Sorry to be so short bro. When you put the monster ram elbow in and add that spacer underneath.. someone was saying that you lose your heater for inside the cab!??
Mikes 16Chevy4X4 grid heater it helps start the truck Cummins don’t have glow plugs they have a grid heater
Could you put a link or something to this setup?
Whats up with that F- body in the garage? When you droppin some mods on that?
Peyton Jackson That's my neighbors lol ya boy can barely afford to keep the Cummins on the road lol
ParoDoXz lmao, you got the basics on the truck covered now. You shouldn't have any issues for a good little while. Knock on wood.
Nice video 👍
What are your overall goals with the truck? I don't want to come off as a hater but it looks like you're spending a lot of money on unnecessary parts. I daily drive a 2001 24 valve that runs 11's with a lot of stock parts under the hood. I like the channel and you're doing a great job on the videos, but it looks like you're getting some bad information from your commenters.
ZachU812 I'm not trying to run 11's or even ever race it Man, just want a fast daily that looks and runs good, those are the only goals man
ParoDoXz I got you. What I'm tryin to say is many of these parts don't need to be replaced at that power level. A BHAF is capable of big hp and is $200 less than most CAIs, stock intake elbow handles big power just fine, stock replacement vp will support 700hp for $700 less than a hot rod pump. All of those upgraded parts make no noticable difference at your power level. If you're trying to make it look cool under the hood then keep doing your thing. I personally think money would be better spent on other upgrades that make a difference you can feel, a valvebody and traction bars for example. Again, not hating, just trying to make sure you're going the right direction. I bought my truck bone stock 2 years ago and saved a lot of time and money on my build talking to the right people.
Any advice on how to purchase a nice clean second gen?
I got one you could buy😂
nice trk did u do the heater delete when u put the monster elbow on or did u leave that I'm wanting to put that on my trk I have 2006 3500.
Jake Brake Thanks man! And no i didn't , I kept it
man when are you going to start it
Joe Buchanan Video will be up tomorrow, gonna finish editing it tonight!
Is your trans still stock? Buncha stuff under the hood now lol!
Alex Matthews Yeah I know lol that's why I baby this thing till I build the trans
+ParoDoXz They really aren't as bad as people say they are, I tow every day I just service it every 12k and its fine. You can use the power as long as the trucks moving, I dont think launches would be a good idea lol.
double upload please i can't wait any longer
Austin Johnson Video will be up tomorrow! Gotta keep y'all in suspense a little bit haha
Austin Johnson Thank you for watching early!
nice dude
xsta nt Thanks man!
So what website did you get the kit off of?
Robert Lockwood I ordered it directly through BANKS
Hey bro when you added the elbow does it take the heat awat???
Away
Mike jordan You talking about the heater block? No it doesn't . But if your talking about the EGTs, I've noticed a little difference
From where do you get your parts?
I'm just getting more and more impatient to hear that baby sing.
Grayson Reichert Haha I know y'all are, I'm sorry lol that video will be up tomorrow!
I have the same intake elbow. Love it. When my. Vp44 took a dump on me I upgraded to the same pump you got. 70k miles later and we're still running strong. Don't think you'll be sorry for spending the extra money.
corey kinnamon Nice man! I'm hoping so!
What pump did you get ? Hot Rod ?
I guessed it!
Have you taken the silencer ring out of the turbo?
Carson Smith First thing I did
Carson Smith yes, he showed it in a earlier video
I could be wrong but pretty sure that's the up pipe not the down tube lol, the down pipe is behind the turbo. But nice video man!
Cole Wright It probably is man, I don't always use the best and most technically verbiage on the channel haha
ParoDoXz Haha I feel ya, you have a great channel man, keep up the good work
i have a maroon 01 24v, what color would look best for accessories under the hood?
jesse thompson I'm not really sure, under the hood colors are really debatable, it's really just whatever you like man
jesse thompson silver
jesse thompson or gun metal gray
You invested a lot of money in streamlining air into that cummins, but you left the single most restrictive element in it. Get that grid heater out of there!
AlphaPsycho that grid heater helps in the winter. Idk where he lives. But I need mine in Ohio. -20 sometimes.
You need to colormatch your tail lights, it would a lot cleaner and sick'er !
Look* lol
Ill think about it lol Thanks for watching!
just the trim piece i mean , not the actual light lol and its a pleasure sick truck keep it up !!
I know what you meant lol And thanks bro!
just start it!
THE Nerv That video will be up tomorrow!
ill be waiting
have you noticed a difference since installing the banks monster ram and boost elbow. I've been considering changing my stocker out and was wondering if it's worth it. Thanks man! keep up the great work!
I have noticed a rise in my boost, also makes a nice noise haha
Thanks for the info man!
Korey Jones Anytime bro, thank you for watching!
@@ParoDoXz What kind of noise?
Can you send me the link for the intercooler tune you got?
Hhuuurrryyy lol exciting stuff
Nick Bader Tomorrow lok
4th gen F body!!!! 👍👍👍
Shouldn't adding a high flow part lower boost pressure? Unless the boost sensor is after the elbow.
Power steering fluid huh that's a first if you do anything more than a bolt on I'd have a mechanic do it
Cody flenthrope haha no shit
3 weeks ago u had 6,000 subs 3 weeks later I already have 8,300
Stephen Stills I know, I'm blessed to say the least
ParoDoXz hey could u check out my truck build on instagram just started it's that15_durtymax
I need a Cummins dude you're inspirational lol
LiftedWhiteChevy Haha they are great trucks man!
What size Allen key is the screw taps? I didn't receive one with my kit
aaaaand I dropped a valve today SMH!!!!!!!! loud clacking noise and slot of smoke
jays4forces Dangggg..
ParoDoXz I simply can't win man.
I installed one of these on my 04 2500. Seen zero improvement. $500 for nothing. If your going to spend your money on boost elbow, get you a $50 part off eBay. If you want improvements upgrade your turbo
I like the Banks but not a fan of the noise from it !!!!
What do you mean by noise?
just start it up alreadyyyyyyyyyy
Video will be up tomorrow!
FYI a lot of your videos are labeled "Private". What gives?
Your dodge video's are way better. To bad you switch
You are way too concerned with scratching the paint. It's a truck bud, and it's a powder coated cast piece. Not gonna hurt it. Makes me sad that you're more worried about how good it looks in the bay rather than the gains you'll see.
There is no such word as tooken. You have it taken apart not tooken.
Hug your dog, he sounds sad.
doesnt link any of it lmfao
Couldnt hear,too echoe
Banks is way way too expensive....!!!