I have been working on getting my dishwasher back "on-line" for many hours. Your fix of retrieving the error codes is the ONLY thing that actually worked. THANK YOU!
I got all the way to 2:44 before I realized my Kenmore elite must be different because I do not have a LCD panel on it. Saying it was flashing codes and I was like what are you talking about? Ha ha.
Great Question Leslie👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin We’ll Get It Fixed 👍
How do you see the diagnostic code if you have a panel ready door, which doesn't have anything in the front door since it's made to custom fit a door panel. Mine doesn't have the led screen like yours
@@jkarasta1 I figured it out. After entering diagnostic mode, observe and count the flashing lights between each sequence from the touch buttons and write them down on a paper. Then, decode the amount of flashing lights between the sequences to match with the error code
Thank you so very much. I had watched several videos. No one said to have the door open, then do the three buttons and then close the door. Mine does not have error codes, but all the lights lit up and we are up and running again.
Hello Scott..I solved it once but after one cycle of washing the same.problem appeared and 1-2-3 trick didn't work again . What wrong may have happened?
Does anyone know of the address of the head quarters of the Sears Company or what is left of them. Our Kenmore Elite dishwasher would not work in the normal mode. It gave errors saying not enough water, start washing and the screen goes blank and starts beeping or it says there is too much suds (we only use Cascade) and not over fill the dispenser. I called Sears to come out and fix it. We have a whole house appliance contract on our appliances. I paid the $ 75 dollar for the service man to come out. He came in opened the dish washer, loosen the screws to the inside door panel and stared at it for several minutes and said 'You need a new dish washer". I told him OK and thanked him and he left. I came here and found this video and tried what you said and by golly it worked. It re-set the controller module and now my dish washer works on all cycles. I'm going to send a letter to someone at Sears and see if I can get my money back or at least gripe at them because the serviceman didn't have the knowledge to do what you said. I'm glad you put this on UA-cam.
Hi , I have Amy mom has a kenmore elite dishwasher 2013, no power to it , had a guy come cost 85$ and all he did was bring up a code F2E2, and said he doesn't know what's wrong with it and he would call .... I have watched few videos and tried to do the 123 thing and nothing lights up, but the code remains on the screen with light, so there must be some power going to it....any advice on something else I can do, so we don't have to spend a fortune on trying to get it fixed? Thank you , ToniAnn
Probably needs a new control board. Whirlpool gold series dishwasher error code e2 f2, means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board.
Wow, you had a lot wrong on the 1 yr old machine...The last on I owned ran for 15 yrs without a problem. I probably could have fixed it but I figured I got my $250 bucks worth, haha...Anyway thanks! EDIT: I guess I should add that my new Elite is only a year old also. :(
This dishwasher causes nothing but problems. The sensor bar has been malfunctioning over and over again. We are on our third one now. Any idea why our dishwasher constantly turns on and beeps after turning it off? We've been having this issue for like a month now. It automatically turns on and starts beeping as if someone is selecting an option. There's no time interval to it and it's erratic. I can't even shut off the beeping noise and it's super loud and annoying. Please help!
I have this exact same model. The Turbo Zone, High Temp, Sani Rinse, 1-12 Hour Delay, Cancel, and Display Scroll lights flash every two seconds and none of the buttons function to be able to get any error codes. I can't find anything online that mentions both of these issues simultaneously.
This stuff is designed/engineered to fail, good luck trying to find a repair manual that will show the error codes what each code means. The repair manuals are stored with the Coca Cola recipe.
I have been working on getting my dishwasher back "on-line" for many hours. Your fix of retrieving the error codes is the ONLY thing that actually worked. THANK YOU!
Wow, great job 👍😊
Watched a lot of different videos none of them work, but yours was spot on. Thanks for posting this. It really helps us out.
You're welcome!😊
I got all the way to 2:44 before I realized my Kenmore elite must be different because I do not have a LCD panel on it. Saying it was flashing codes and I was like what are you talking about? Ha ha.
Several lights are blinking. When I try what was suggested none of the buttons do anything. Any suggestions????
Great Question Leslie👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
We’ll Get It Fixed 👍
Thank you so much for your help
Happy to help😊😊
How do you see the diagnostic code if you have a panel ready door, which doesn't have anything in the front door since it's made to custom fit a door panel. Mine doesn't have the led screen like yours
Exactly. Me too. Did anyone ever answer you? My Washing Sanitized lights won’t turn off
@@jkarasta1 I figured it out. After entering diagnostic mode, observe and count the flashing lights between each sequence from the touch buttons and write them down on a paper. Then, decode the amount of flashing lights between the sequences to match with the error code
Thank you so very much. I had watched several videos. No one said to have the door open, then do the three buttons and then close the door. Mine does not have error codes, but all the lights lit up and we are up and running again.
Awesome,
Thanks Sylvia😊
Hello Scott..I solved it once but after one cycle of washing the same.problem appeared and 1-2-3 trick didn't work again . What wrong may have happened?
Any ideas on how to change the display to English?
What year does this method of retrieving codes apply?
Does anyone know of the address of the head quarters of the Sears Company or what is left of them.
Our Kenmore Elite dishwasher would not work in the normal mode. It gave errors saying not enough water, start washing and the screen goes blank and starts beeping or it says there is too much suds (we only use Cascade) and not over fill the dispenser.
I called Sears to come out and fix it. We have a whole house appliance contract on our appliances. I paid the $ 75 dollar for the service man to come out.
He came in opened the dish washer, loosen the screws to the inside door panel and stared at it for several minutes and said 'You need a new dish washer". I told him OK and thanked him and he left.
I came here and found this video and tried what you said and by golly it worked. It re-set the controller module and now my dish washer works on all cycles.
I'm going to send a letter to someone at Sears and see if I can get my money back or at least gripe at them because the serviceman didn't have the knowledge to do what you said.
I'm glad you put this on UA-cam.
How do you reset the dishwasher after viewing the error codes?
You can unplug it for 3 hours to let the error codes fade out👍
Hi , I have Amy mom has a kenmore elite dishwasher 2013, no power to it , had a guy come cost 85$ and all he did was bring up a code F2E2, and said he doesn't know what's wrong with it and he would call .... I have watched few videos and tried to do the 123 thing and nothing lights up, but the code remains on the screen with light, so there must be some power going to it....any advice on something else I can do, so we don't have to spend a fortune on trying to get it fixed?
Thank you , ToniAnn
Probably needs a new control board. Whirlpool gold series dishwasher error code e2 f2, means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board.
Wow, you had a lot wrong on the 1 yr old machine...The last on I owned ran for 15 yrs without a problem. I probably could have fixed it but I figured I got my $250 bucks worth, haha...Anyway thanks!
EDIT: I guess I should add that my new Elite is only a year old also. :(
You’re welcome
My Kenmore elite doesn't have display. How do you get codes
Thanks….
You’re welcome 😊
This dishwasher causes nothing but problems. The sensor bar has been malfunctioning over and over again. We are on our third one now.
Any idea why our dishwasher constantly turns on and beeps after turning it off? We've been having this issue for like a month now. It automatically turns on and starts beeping as if someone is selecting an option. There's no time interval to it and it's erratic. I can't even shut off the beeping noise and it's super loud and annoying. Please help!
Also, do you know where the power plug is? I cannot find it at all. (My Kenmore Elite doesn't have that diagnostic screen on the bar as well.)
It’s time for a new controller .
Only 800 number flashing. Tried pushing buttons in sequence. No other buttons light up except code. Nothing helps!!
Can you send that same question to my email: scottthefixitguy@yahoo.com
My dishwasher looks nothing like that it’s 3 years old kenmore plan Jane light blinking won’t do anything else
Can you send that same question to my email at: scottthefixitguy@yahoo.com
I have this exact same model. The Turbo Zone, High Temp, Sani Rinse, 1-12 Hour Delay, Cancel, and Display Scroll lights flash every two seconds and none of the buttons function to be able to get any error codes. I can't find anything online that mentions both of these issues simultaneously.
Hi Jeff,
Can you unplug it overnight and let me know if it works tomorrow ?
Wow thanks for responding. Will do...
I flipped the breaker off last night. Flashing stopped. But resumed flashing this morning when I flipped it back on this morning.
Thank you very much..
I received the F9E4 code as well
How can fix that
Me too... 😩
Anyone know what the fix is?
One of the first things you want us to do is push the Start button, but it' my Start button that's not working
Thank you
Thanks
This stuff is designed/engineered to fail, good luck trying to find a repair manual that will show the error codes what each code means. The repair manuals are stored with the Coca Cola recipe.
😂😂😂