Your a life saver. Our Kenmore Elite dishwasher would not work in the normal mode. It gave errors saying not enough water, start washing and the screen goes blank and starts beeping or it says there is too much suds (we only use Cascade) and not over fill the dispenser. I called Sears to come out and fix it. We have a whole house appliance contract on our appliances. I paid the $ 75 dollar for the service man to come out. He came in opened the dish washer, loosen the screws to the inside door panel and stared at it for several minutes and said 'You need a new dish washer". I told him OK and thanked him and he left. I came here and found this video and tried what you said and by golly it worked. It re-set the controller module and now my dish washer works on all cycles. I'm going to send a letter to someone at Sears and see if I can get my money back or at least gripe at them because the serviceman didn't have the knowledge to do what you said. I'm glad you put this on UA-cam.
Thank you so much!!! Called Kenmore 3 times, they were finally honest and said they don't have a technical questions department. They couldn't even really help find the model number. You're help has saved the day! Finally a you tube video that actually helped resolve an issue!!!
Thank you, your video was light years ahead of anything Kenmore has offered up to it's customers. Your video was well done and to the point. Yours was easy to understand, unlike so many of the videos out there. Thanks for taking time to help your fellow Kenmore sufferer regain use of the dishwasher that we paid so much for.
Thank you, and thank you again! After months of hand washing my dishes and looking for a new dishwasher, I happened to come across your video. I don't know how I missed this in the past. My dishwasher now works!
Thanks . Someone on the facebook was giving a dishwasher similar to yours away for free so I was trying to research it . He said itll run a half cycle and stop with the lights blinking. I have a bad feeling it's just gonna have to be rest. I'm so glad I ran up on your video. Thanks x 10
Thank You! This really helped me out with my issue of my panel! Found Nothing in the Manual, etc until I had to look it up as I knew the panel could be reset somehow! The panel lit up just like you showed us and it went through a few cycles and finished about 30 min later. Keyword.. Let it Finish!
THANK YOU!!! Your video saved us over $300 (or maybe even having to buy a new dishwasher)! It worked for Kenmore Elite Ultraclean dishwasher model 66514752N510 which we got about 2 1/2 years ago.
Awesome brother! My Kenmore sucks a mean one, along with my Fridge. I purchased all my appliances about two to three years ago. My Fridge completely went out. Had to replace it, at the Sears Owners expense. Then the movers brought in the new one and broke the water dispenser hose. Now I have to get another new one. WTF? Sears and Kenmore blow. Never again. Thanks for your video. Good job!!!!
Keep this in mind next round. Whirlpool, Frigidaire etc.. manufactures Kenmore for Sears. So' in order for (2) corps to make money they make a very cheap but very nice looking unit called a "Sucker unit" aka polished up turd if you will? The manufactures make them for these p.o.s. corps like sears to sell on the grounds Sears handles all warranties and they sell contract to sell millions of these units to people so hell' manufactures love it. Just make a p.o.s. with low/no quality control and make a fortune with no warranties to handle. Win Win!! How I know? Sears & Pioneer done it to me in the late 80's. After sears failed to repair the p.o.s. (3) times I personally called Pioneer to fix it. It just shut off at 30% volume... Pioneer said " Sir' we don't warranty our Pioneers sold through Sears, sears does". Then said' "We build (actually change) the stereos to conform to Sears specs, they're not our real Pioneers". WTH??? Needless to say I returned that $1200 stereo (IN PIECES to be Unsellable) and have never bought anything but clothes/tools from Sears and "nothing" from Pioneer ever again. Neither cared what they sold so' screw both! I bought a JVC system that's still problem free today.. Yes still jams like day one after 30 yrs! Many do it with mowers,furniture,appliances etc.. Do that homework!
Thanks for your help. I tried all other options prior including unplugging confirming the water is 120 coming in etc. My diagnostic test seemed to run for 20 min. My problem was it wasn’t sanitizing nor was it drying - I assumed it was the heating element gone bad after only having the unit for a year. After test it def is hot hot hot again 👍
Thank you - this fixed my issue as well. I should point out that I was initially having issues with the instructions. You'll please note that when the sequence of buttons were pressed in the video, each button he pressed "lit up" as he pressed them. For some reason mine weren't lighting up as they were in the instructions. I forget if I had to hit the "reset" button or unplug the unit first to get them to light. Once the buttons lit up (as shown in the video) the reset sequence worked and I was back in business. Thanks again for the video !!!!
@@observer698 Sorry for the (very) long delay in responding - after a year I had to find this video again and re-run the process and I just saw your question. To answer your question - yes - if when running the 1-2-3, 1-2-3, 1-2-3 sequence shown - if each light doesn't light up, unplug the dishwasher for about 10 seconds and try it again. Once your front panel lights up like a Christmas tree, simply close the dishwasher door. Set a timer for 25 minutes and resist the urge to do anything until the 25 minutes have expired. The front panel will say "complete" almost immediately, then flash "complete", then go blank, etc. during testing. After the 25 minute period you should be all set to run the dishwasher as "normal". I just ran through the process again today (after a year) and I'm back in business again.
Thank you so much for this video! You saved us over $200.00 that we would have spent on a repair that we really didn't need! Although our dishwasher is older than your model, this method worked. Now our dishwasher is working again! Thank you, thank you! : )
Thanks so much. I checked my manual after it was "locked" and other videos online and your video provided me with a good outcome. Luckily, after mine ran the diagnostic test, everything worked. I didn't see a code anywhere indicating the original reason why it would not unlock or even where this code might appear. I tried the website you posted and it is now private and I could not find any where else where there was a service repair or diagnostic manual, only the original manual that was of no help. I really appreciate you doing the video as I try and fix things myself before calling someone to help me. Thanks!!!
Here it is again July 17, 2024 and our Kenmore Elite Dish Washer saying low water pressure. I thought I had downloaded this video but I could not find it. Thankfully it was still on the internet so I downloaded it again. Right now I am waiting for that 25 minutes to countdown.
I have a Kenmore model 665 13973K010. I ran diagnostics and runs for about 20 minutes and beeps. No flashing lights, nothing. Does this mean it passed all tests with no codes? I sometimes get a over sudsing issue where it just stops. I replaced the float switch which I think helped. Heard it could be a vent issue as well. I heard the contacts can get rusty on the plug for the vent system. Will see what happens I guess. I run the Cascade Platinum paks and no rinse aid since the paks have the aid built in. I had better performance with old fashion regular Cascade powder. Thanks for the video.
TY, the 3 button, lights on, shut the door, open it and all now working fine, just resetting the computer did the trick. 3 minutes max and all fixed. It forces a complete reload of the computer program " hit the 3 buttons 3 time 123 123 123 .... 3 times fast,1 sec each., all lights come on. Shut the door and clean your dishes. Thanks again..
thanks for your suggestion. When I press three buttons, buttons do not lit and the 'daignostics , TEST" does not start. The WASHING light is flashing.. I tried unplugging and plugging but still did not work
Thank you my friend, you really saved me with this web site you posted. I was trying to located info on my dishwasher and this site gave everything needed. Thanks again.
Mine is doing the same thing. I got that u hit the sequence of buttons...all my lights work. But what do u do after that? I'm confused. My dishwasher drains...just stops and starts blinking after about 15 min.
sending air kisses..u ARE a life, money and mental health saver..thank you thank you thank you..and I agree with all the positive comments that have already been shared.
Very nice!! Thank You for the info.. I was able to find my manual but it never said how to reset and have the dishwasher do diagnostic for my kenmore elite with smartwash. Thanks x20
The diagnostics section of your dishwashers manual should help you out. The Control Board might need to be replaced or your pump might be bad. If it doesn't go through the diagnostic self-test it's probably the Control Card.
Dec 2019 - Here is a link to the manual. It will download a PDF file to your computer / device: www.applianceblog.com/mainforums/attachments/22110313-sears-kenmore-elite-2013-stainless-steel-tall-tub-dishwaher-service-manual-pdf.33568/
Mine is totally black, no lights on. Looks like the same model. I hate this thing and of course it breaks a month before I finally get out of this slumlord apartment.
It’s 2023 and I keep coming back to your video when my dishwasher isn’t working. Thank you so very much! It has worked every time😊🎉
This is the best reason I can think of for the existence of the internet. You’ve revived (at least for a little while) my faith in humanity. Thanks!
Your a life saver. Our Kenmore Elite dishwasher would not work in the normal mode. It gave errors saying not enough water, start washing and the screen goes blank and starts beeping or it says there is too much suds (we only use Cascade) and not over fill the dispenser.
I called Sears to come out and fix it. We have a whole house appliance contract on our appliances. I paid the $ 75 dollar for the service man to come out.
He came in opened the dish washer, loosen the screws to the inside door panel and stared at it for several minutes and said 'You need a new dish washer". I told him OK and thanked him and he left.
I came here and found this video and tried what you said and by golly it worked. It re-set the controller module and now my dish washer works on all cycles.
I'm going to send a letter to someone at Sears and see if I can get my money back or at least gripe at them because the serviceman didn't have the knowledge to do what you said.
I'm glad you put this on UA-cam.
Thank you so much!!! Called Kenmore 3 times, they were finally honest and said they don't have a technical questions department. They couldn't even really help find the model number. You're help has saved the day! Finally a you tube video that actually helped resolve an issue!!!
Thank you, your video was light years ahead of anything Kenmore has offered up to it's customers. Your video was well done and to the point. Yours was easy to understand, unlike so many of the videos out there. Thanks for taking time to help your fellow Kenmore sufferer regain use of the dishwasher that we paid so much for.
My first video response ever. This video just saved me 1,100 dollars. I can cancel the new dishwasher on order.
Thank you, and thank you again! After months of hand washing my dishes and looking for a new dishwasher, I happened to come across your video. I don't know how I missed this in the past. My dishwasher now works!
Thanks . Someone on the facebook was giving a dishwasher similar to yours away for free so I was trying to research it . He said itll run a half cycle and stop with the lights blinking. I have a bad feeling it's just gonna have to be rest. I'm so glad I ran up on your video. Thanks x 10
My bad - I scrolled down and found it. Many many thanks for taking the time to make the video.
Thank You! This really helped me out with my issue of my panel! Found Nothing in the Manual, etc until I had to look it up as I knew the panel could be reset somehow! The panel lit up just like you showed us and it went through a few cycles and finished about 30 min later. Keyword.. Let it Finish!
THANK YOU!!! Your video saved us over $300 (or maybe even having to buy a new dishwasher)! It worked for Kenmore Elite Ultraclean dishwasher model 66514752N510 which we got about 2 1/2 years ago.
Awesome brother! My Kenmore sucks a mean one, along with my Fridge. I purchased all my appliances about two to three years ago. My Fridge completely went out. Had to replace it, at the Sears Owners expense. Then the movers brought in the new one and broke the water dispenser hose. Now I have to get another new one. WTF? Sears and Kenmore blow. Never again. Thanks for your video. Good job!!!!
Keep this in mind next round. Whirlpool, Frigidaire etc.. manufactures Kenmore for Sears. So' in order for (2) corps to make money they make a very cheap but very nice looking unit called a "Sucker unit" aka polished up turd if you will?
The manufactures make them for these p.o.s. corps like sears to sell on the grounds Sears handles all warranties and they sell contract to sell millions of these units to people so hell' manufactures love it. Just make a p.o.s. with low/no quality control and make a fortune with no warranties to handle. Win Win!!
How I know? Sears & Pioneer done it to me in the late 80's.
After sears failed to repair the p.o.s. (3) times I personally called Pioneer to fix it. It just shut off at 30% volume...
Pioneer said " Sir' we don't warranty our Pioneers sold through Sears, sears does". Then said' "We build (actually change) the stereos to conform to Sears specs, they're not our real Pioneers". WTH???
Needless to say I returned that $1200 stereo (IN PIECES to be Unsellable) and have never bought anything but clothes/tools from Sears and "nothing" from Pioneer ever again. Neither cared what they sold so' screw both!
I bought a JVC system that's still problem free today.. Yes still jams like day one after 30 yrs!
Many do it with mowers,furniture,appliances etc.. Do that homework!
Wow!! You are a lifesaver!! This method worked like magic!! THANKS FOR TAKING THE TIME TO POST.
Thanks for your help. I tried all other options prior including unplugging confirming the water is 120 coming in etc. My diagnostic test seemed to run for 20 min. My problem was it wasn’t sanitizing nor was it drying - I assumed it was the heating element gone bad after only having the unit for a year. After test it def is hot hot hot again 👍
does the board on front light up an state what is wrong.
Awesome. That worked! We don't even have that model Kenmore (ours is older and doesn't have a readout), but the reset did the trick. Thank you!
Thank you - this fixed my issue as well. I should point out that I was initially having issues with the instructions. You'll please note that when the sequence of buttons were pressed in the video, each button he pressed "lit up" as he pressed them. For some reason mine weren't lighting up as they were in the instructions. I forget if I had to hit the "reset" button or unplug the unit first to get them to light. Once the buttons lit up (as shown in the video) the reset sequence worked and I was back in business. Thanks again for the video !!!!
so you have to unplug the dishwasher for the buttons to lit?
@@observer698 Sorry for the (very) long delay in responding - after a year I had to find this video again and re-run the process and I just saw your question. To answer your question - yes - if when running the 1-2-3, 1-2-3, 1-2-3 sequence shown - if each light doesn't light up, unplug the dishwasher for about 10 seconds and try it again. Once your front panel lights up like a Christmas tree, simply close the dishwasher door. Set a timer for 25 minutes and resist the urge to do anything until the 25 minutes have expired. The front panel will say "complete" almost immediately, then flash "complete", then go blank, etc. during testing. After the 25 minute period you should be all set to run the dishwasher as "normal". I just ran through the process again today (after a year) and I'm back in business again.
Thank you so much for this video! You saved us over $200.00 that we would have spent on a repair that we really didn't need! Although our dishwasher is older than your model, this method worked. Now our dishwasher is working again! Thank you, thank you! : )
Thank you for this video demo and detail - I was able to successfully reset my Kenmore Elite, same model as yours.
Thank you!
My Kenmore elite has the buttons on the front but I did what you said and it worked just like you said.
Thank you!!!
Thanks so much. I checked my manual after it was "locked" and other videos online and your video provided me with a good outcome. Luckily, after mine ran the diagnostic test, everything worked. I didn't see a code anywhere indicating the original reason why it would not unlock or even where this code might appear. I tried the website you posted and it is now private and I could not find any where else where there was a service repair or diagnostic manual, only the original manual that was of no help. I really appreciate you doing the video as I try and fix things myself before calling someone to help me. Thanks!!!
Thank you for the video! I'm letting the dishwasher cycle through for 24 minutes as you suggest. What do I do once I get the diagnostic code?
Kenmore Ultra Wash 665.13543 - Sani Rinse | High Temp | Heated Dry 3x then close the door
Here it is again July 17, 2024 and our Kenmore Elite Dish Washer saying low water pressure. I thought I had downloaded this video but I could not find it. Thankfully it was still on the internet so I downloaded it again. Right now I am waiting for that 25 minutes to countdown.
Fixed my dishwasher also. Thank you for your assistance
I have a Kenmore model 665 13973K010. I ran diagnostics and runs for about 20 minutes and beeps. No flashing lights, nothing. Does this mean it passed all tests with no codes? I sometimes get a over sudsing issue where it just stops. I replaced the float switch which I think helped. Heard it could be a vent issue as well. I heard the contacts can get rusty on the plug for the vent system. Will see what happens I guess. I run the Cascade Platinum paks and no rinse aid since the paks have the aid built in. I had better performance with old fashion regular Cascade powder. Thanks for the video.
The simple restart he showed in the video fixed the problem with my washer.
Thanks that's what I needed to get the diagnostic started!
Thank you for sharing it! Great help!
TY, the 3 button, lights on, shut the door, open it and all now working fine, just resetting the computer did the trick. 3 minutes max and all fixed.
It forces a complete reload of the computer program " hit the 3 buttons 3 time 123 123 123 .... 3 times fast,1 sec each., all lights come on. Shut the door and clean your dishes. Thanks again..
3 minutes .... not all night. and no assurance it will properly reset. A waste of time. 3 minutes. That's it, all it took and $0 out.
thanks for your suggestion. When I press three buttons, buttons do not lit and the 'daignostics , TEST" does not start. The WASHING light is flashing.. I tried unplugging and plugging but still did not work
Ram Voruganti got to hit the 3 buttons 3 times in a row. If that helps
I have a 665 147 Kenmore elite and this procedure of pushing the 3 inputs 3 times doesn’t do anything. Any suggestions. Thank you. New subscriber
Thank you my friend, you really saved me with this web site you posted. I was trying to located info on my dishwasher and this site gave everything needed. Thanks again.
Mine is doing the same thing. I got that u hit the sequence of buttons...all my lights work. But what do u do after that? I'm confused.
My dishwasher drains...just stops and starts blinking after about 15 min.
Mine is doing this same thing....
It worked! You are my new best friend.
sending air kisses..u ARE a life, money and mental health saver..thank you thank you thank you..and I agree with all the positive comments that have already been shared.
Thank you so much! It's Dec. 8th 2018 and your directions still hold true! TY =0)
Very nice!! Thank You for the info.. I was able to find my manual but it never said how to reset and have the dishwasher do diagnostic for my kenmore elite with smartwash. Thanks x20
Thank you! Finally, advice that worked.
Thank you so much, you solved our dishwasher problem.
My red cancel light keeps blinking and I can’t press 3 buttons like u suggested :(
Link doesn't seem to work. Can you cut and paste the link in the comments section?
Thanks
Here is the link to the manual:
www.scribd.com/doc/250760990/22111007-Sears-Kenmore-Elite-Source-665-2007-Ultra-Wash-HE-Dishwasher-Service-Manual
Ran my diagnostic, got my codes, still the start and stop buttons won't work.
I wish that you had put the URL below.
That was a great tip! Thank you
Any idea what code F9E1 means?
Thanks a ton Sir. Awesome help :) :)
Thanks! This helped even though I have a different model.
Worked for me. Thanks.
How do u get it to start after all the lights come on
Just close the door.
Thanks! this was the fix.
What error is AE
Dude, thank you
Thanks. This helped me a lot.
Model 16589 reset sequence is HiTemp AirDry, HiTemp AirDry, HiTemp
Thank you for your help!😃
Thank you sooooooo much!!!!! Sept 9, 2020
Didn’t work for me my normal wash light is blinking red! And won’t drain as well. Any help-anyone. Kenmore quiet guard ultra wash
The diagnostics section of your dishwashers manual should help you out. The Control Board might need to be replaced or your pump might be bad. If it doesn't go through the diagnostic self-test it's probably the Control Card.
Thank you!!
Omg thank you! 😊
Thank you.
Thanks man!!!
Dec 2019 - Here is a link to the manual. It will download a PDF file to your computer / device: www.applianceblog.com/mainforums/attachments/22110313-sears-kenmore-elite-2013-stainless-steel-tall-tub-dishwaher-service-manual-pdf.33568/
Thank You did very well.
Thanks
Thank you
Mine is totally black, no lights on. Looks like the same model. I hate this thing and of course it breaks a month before I finally get out of this slumlord apartment.
thk u, thk u, thk u!!!!