MountDog Softbox Lighting Kit Unboxing, Assembly and Testing in 3 possible Set up
Вставка
- Опубліковано 13 жов 2021
- MountDog Softbox Lighting Kit - Unboxing, Assembly and Testing in 3 possible Set up
I am not expert on lightings so I might said an incorrect terminologies so please correct me if you noticed some. Please leave me a comment for some suggestions to have a better set up as this is my first time having them.
Amazon:
amzn.to/3U0SwO5
#mountdogsoftbox#
Good job! Don't worry about "incorrect terminologies". The bottom line - I watched you video and put mine together in 5 minutes. That's what counts!
Thank you
Same here! Taking that little cap of the tripod was something so simple but I didn’t figure out to take it off until I watched this video.
OMG thank you so much for this video! I hate assembling things because no matter how easy it is, it's hard to follow and I'm usually frustrated and assemble things incorrectly. You made this so much easier for me.
I’m glad to share
Exactly the help I needed! (And so clearly and succinctly explained and demonstrated!) Thank you so much!! 😊😊
Glad it helped!
This video saved my time, you are such a good teacher, thank you.
Thanks for the compliment. My pleasure to share
perfect demo/tutorial video, straight to the point. thanks!
Thank you
was looking into getting this light and wanted to see reviews of it. Out of the videos i watched, yours is the only one i found that use the light in the way i was looking to use it, with an RGB light in the background. thank you for a VERY educational video!
My pleasure to share. 🙏
Thank you. I just ordered the single one and had no idea how to put it together. Got it now.😊
Great!
I just got one box today and opened it to see there were no instructions at all except for the remote control. I felt like I was going to break it in three different places and I had no idea I was supposed to take the black tip off at the top, lol. Yours was the very first video I clicked on and I don’t need to look at anything else. You explained it so perfectly from beginning to end. And I love that you showed us all of the examples of the set ups and with the lights on compared to when you only had that one table lamp on. Thank you so much. This is amazing! 15:04
I’m glad it helped 🙏
Thank you for sharing! Made it a breeze ☺️
I’m glad to share
Watching from Los Angeles, California. Great job, beautiful demonstration. Thx.
Thank you 🙏
Great video! I found your video very helpful and I've decided to purchase this set. Thank you, keep up the great work!
Thank you
Thank you so much for this easy to follow tutorial!!
I’m glad it helped
Thank you. This was very helpful!
Glad it was helpful!
Thank you for the demo!
I’m glad to share
Thanks so much. Not getting any instructions, this was really helpful and comprehensive. Thanks. Well done!
I'm glad you liked it
Thank you so much! I just unboxed my new set and could not figure out how to set it up. The instructions were very vague. This was so helpful.
Great to hear!
This video was extremely helpful!! Thank you so much!!
Glad it was helpful!
Very good information and equipment, thanks for sharing!
You’re most welcome
Thank you for such an honest review. Good job. Mine are arriving tomorrow. Just one thing, we were not able to see the colour temperature because your iphone camera was set on auto so it was balancing out each temperature evenly.
You are right. I’ll keep that in mind next time.
I had setup my softbox along with you. Thank you!
Great to hear!
thanks- i love these lights!
My pleasure
Thanks for Sharing! Great Job!
Thank you
Great video! Just got it but didn’t know how to set it up. Thank you!
No problem.
Thank you for sharing this video about bulb studio, today i have received oder one set .
Good night from me at Malaysia.. bye for now 😅❤
Good for you
Awesome review, thanks!!
I’m glad to share. Thanks
Thank you for sharing, I'm buying.
Good for you
This helped me a lot, thanks!
My pleasure
so helpful; thank you!
You're so welcome!
Great video!
Thanks
Thank you this was helpful!
My pleasure
Very informative video. Thanks for sharing. Have a great day. 🎉💰👍456 likes
Thank you 😊
This helped so much !
I’m glad it helped
Very good user video l, thank you!
My pleasure. Thanks
Great Video!
Thank you
Thank you!
My pleasure
Good information Watching fr Australia thanks for sharing
Salamat po
Cool stuff
Thanks
Good video
Thank you
Thank you!!!
My pleasure
Thank u ma'am helpful vid!
Glad to share
Great 👍
Thank you
thank you
My pleasure to share
This was very helpful. Thank you!
My pleasure to share
Camera was set to auto so it was correcting the color change and the brightness. You can get an idea of color momentarily during change but camera corrects soon after.
I appreciate your input 🙏
I know that there’s “rules” and then… also, don’t be afraid to try different stuff.
However, if I have one Mountdog and another light from another mfg. Aren’t there times when we’d need to match temp?.. how do I match temp here?.. just “eye-it-up”?
Thanks. It depends on the person’s preference.
Is there a way to control the lights independently? I saw a review that said each remote is only supposed to work on the light it came with.
As I mentioned on my prior respond to your comment “You can use them both for sure. To change the intensity on each, I have to cover the remote of something so other light won’t get the signal or it won’t change and only the 1 I’m pointing at. Other way would be to set intensity on 1 then turn it off. Then turn on the next 1, then set the intensity (don’t turn off the 2nd 1. Now turn on the 1st 1 as it saves the last setting you made on the 1st one”.
As per the unit I have, my 2 remote works for both of them.
I have three of these and I am having a difficult time changing the settings on just one light at a time. I can get it to work eventually, but then my other light settings are messed up.
I’m going to try putting the remote in a paper towel tube and see if that helps.
There is an easy way. Given a chance I’ll make a video on that soon.
@@jenuds ok thank you! I tried the paper towel roll and it actually works lol. So, I was able to get my lights setup, and if I angle the remote just right, I can turn on/off all three at once.
Try this simple set up as I showed in this video ua-cam.com/video/YHRQz2YOj-Q/v-deo.html
I think you have the diffusion sheet inside out. i flipped the edges of mine around and it secured to velcrow a lot better
Thank you. I’ll try that.
Haha I did the same with mine. Gonna flip them now.
Right.😇 Thanks to Courtney, I had flipped mine as soon as I received her comment.
@@jenuds how do you set each to a different intensity? Or do you always use them both at the same brightness?
You can use them both for sure. To change the intensity on each, I have to cover the remote of something so other light won’t get the signal or it won’t change and only the 1 I’m pointing at. Other way would be to set intensity on 1 then turn it off. Then turn on the next 1, then set the intensity (don’t turn off the 2nd 1. Now turn on the 1st 1 as it saves the last setting you made on the 1st one
I have the same cheese knife!
Nice!
Great video!!! I want to get these lights but I can't find the shipping weight anywhere. If anyone can tell me their weight I would be completely grateful.
I according to Amazon.ca it’s 4.08kg
@@jenuds Thanks!!
My remote doesn’t appear to be working. Is there something specific you have to do it to get the lights to turn on/adjust colour temp etc?
As per experience, once you install batteries on it, it should work right away. Anyway, did you turn on first the switch attached to the light then you can use the remote to turn on or off or change color temperature.
@@jenuds thank you! I think I was expecting the remote light to turn on. I realized I needed to be closer to the soft box light to get it to work :)
@@aligned.living. I see. Good job!
Wow nice po
😊
Birthday ko po cs sa October 19 sana greetings po q
Paki pm sent po ako sa Messger ko Ismael isavedra po
Loobin po
Ito na po ua-cam.com/video/_IjmQsSPDzY/v-deo.html
Lighting setup for video starts at 7:00
👍
Can you take automatic pictures from it remote?
Remote is only to control the light.
Does the remote control both lights separately or it changes them both at the same time? Can they be changed separately?
You can control the light separately or the same time.
@@jenuds when both lights are on how do you go about using the remote to control them at the same time vs. controlling them separately?
@@mthomasiv A few ways of they’re both on. Sometimes I have cover the remote from the other light if I want to change the other one. Sometimes I would move the other light a bit farther from the other light, then change the light temperature, then put it back. If they’re not close to each other, you don’t need to move it.
@@jenuds thanks so much
No problem
"Something like that"
👍🏻
Please turn off Auto white balance from your camera. We cant see any differences
You are right. Sorry I’m not a pro😇
@jenuds I'm not trying to be rude. I'm just saying to turn it off next time. It's hard to compare otherwise
@TonTonTon140 No worries. You are right. I realized when the I received the first comment like yours😊 thank you
Is one light bright enough for amateur studio portrait photography?
Actually on most of my videos so far, I only use 1 light and I sometimes I just use a little fill light on the other side.
Excellent product review! Thank you. so needed its a great product but doesn't comes with directions so I really appreciate this video. 5 Stars!
I’m glad to share. Thank you
Thank you!!!
No problem