S55 Power Combo! NGK Spark Plugs & Dinan Ignition Coils

Today I'm installing (and reviewing) a set of NGK spark plugs and Dinan ignition coils for my 2017 M3. This is my first time replacing spark plugs, so I wanted to make a sort of ride-along video for other first timers who want to start doing their own maintenance.
Other than the chore of everything you have to remove in the S55 engine bay to get to the spark plugs, changing them was pretty easy (and ignition coils are insanely easy). Much like any other maintenance task you've never done before, I was a little nervous to do this but I took my time and tried to stay organized which made everything go smoothly.
I'm not sure if it's power of suggestion or placebo effect (not sure that's applicable here) but the car feels a little bit better now. Little bit better throttle response, feels like she runs a bit more smoothly, one or two very subtle noises I was hearing before that I'm not hearing now so overall I'm super happy with the results.
I did notice a misfire on cold start afterwards (using BimmerLink), none at idle, and then a few very sporadic ones while driving. Based on what I've read, these can be expected, but I'm keeping an eye on them and will also compare again after I tune the car. I wish I would have scanned for them before hand to see if there was any difference but based on how the car actually feels, I'm not concerned.
Anyway, to any other first timer out there, this wasn't hard just time consuming. Save yourself some money and get to know your car better!
🔔 Subscribe for more mods, maintenance and detailing videos!
Thanks for watching!
- Jeremy
Here’s some of my favorite detailing/garage products (plus stuff I use to film if you’re interested in that). Most of these are affiliate links meaning I get a small commission from purchases at no extra cost to you.
If you’d like to support the channel, pick something up! You can also shop at Obsessed Garage using this link: bit.ly/4eiUYJm - your support is very much appreciated!
Products in this video:
Dinan Ignition Coils: tinyurl.com/3kkxts2u
NGK Spark Plugs: tinyurl.com/4m4u9f7m
Thin Wall 14mm Socket: amzn.to/47SeW9p
Torque wrench: amzn.to/3vJPUfc
Trim Tool Kit: amzn.to/3ucUFxw
My OBDII Setup
Veepeak Bluetooth Scanner (for BimmerCode): amzn.to/48aJSCU
ENET Cable (for Bootmod3, ISTA, etc): amzn.to/3Sf3FKv
Favorite Detailing Chemicals:
Koch-Chemie GSF: bit.ly/4bWtjfI
OG Decon Soap: bit.ly/4bYbUDj
P&S Brake Buster: bit.ly/4evdOgy
P&S Interior Cleaner: amzn.to/47neBv5
P&S Iron Buster: bit.ly/45nP9Gh
Drying Aid: bit.ly/4eduFEx
CarPro TarX: bit.ly/3KHLEkO
CarPro Eraser: bit.ly/3Rolfw7
Invisible Glass: bit.ly/3xcyhWC
Meguiar’s APC (engine bay): amzn.to/41MI6Fo
Meguiar’s Hyper Dressing (engine bay, wheels): bit.ly/3VFgjpd
McKee’s 37 N-914 Rinseless (clay bar lubricant): bit.ly/3XnnX8K
Sonax Alcantara Cleaner: bit.ly/4aUg264
Detailing Tools:
Microfiber Madness Incredipad: bit.ly/3RkGAGM
Tire brush: amzn.to/47pZ3qk
Wheel Mitt: bit.ly/3KFKNkA
Nanoskin AutoScrub: amzn.to/3ROpwIt
DF Brushes (engine, wheels, mats): amzn.to/4aCQiMu
DF Ultra Soft Brushes (interior): bit.ly/4cejsBC
DF Curveball Brush (tires): bit.ly/3yRV6iE
DF EZ Detail Brush: bit.ly/3Xm2FIS
Lilly brush (best pet hair remover): amzn.to/48mZlzB
DIY Maintenance Tools:
Battery Analyzer: amzn.to/3GWlE36
Battery Tender: amzn.to/3TVMXC1
Milwaukee Ratchet: amzn.to/48RISnj
Flex Head Ratchet Set: amzn.to/3Si9jvf
Lug Nut Socket: amzn.to/3UgDNAs
E-Torx Set: amzn.to/49fMLm1
Punch Set: amzn.to/49894tF
Magnetic Wands: amzn.to/49cKkjM
Film Gear:
Main camera amzn.to/4aKWbHp
Insta360: amzn.to/3W5GZy4
Lens: amzn.to/3tIrAty
Mic: amzn.to/48lYsaF
Gimbal: amzn.to/3H47CN3
Lights: amzn.to/41KTHEU
Tripod: amzn.to/41LpGF4
Check out some more videos:
• New Valvetronic Design...
• 8 Step FULL Exterior D...
• Bimmer INVASION 2023 C...
Instagram: / jgo.m3
Music I use (free trial referral link): share.epidemicsound.com/6qz34k
Timestamps:
00:00 - Intro
00:34 - Disclaimer
01:18 - NGK spark plugs
01:45 - Dinan ignition coils
02:39 - On the subject of gapping
03:48 - Tools
04:39 - Gapping the plugs
06:12 - Disconnect the battery
06:52 - Removing parts
10:43 - Plugs and coils install
13:58 - One more up close
16:12 - Mission accomplished
16:55 - A note about organization
17:37 - Reassembly
18:11 - A note about torque specs
19:38 - Does it start?
20:10 - Initial impressions
23:21 - A note about reassembly
25:00 - What could have gone wrong?
26:23 - When to do spark plugs
27:51 - Bonus tip
#ngk #dinan #sparkplugs #bmw #f80m3

[@patrickbrowne7191]

I enjoyed this thank you.

[@jgo.m3]

Glad to hear brother, thank you for taking the time to comment 🍻

[@ianounanian8990]

Dude I love the ride along video’s perfect for me👍

[@jgo.m3]

Awesome, glad you like them! I know there are a ton of videos out there that show you how to do oil changes and spark plugs and whatever else in these cars, but really the point here is to show them from an absolute first-timer's perspective and, hopefully, encourage people who want to get into doing their own maintenance to give it a shot. Lots more coming in 2024 👍

[@ianounanian8990]

You’re 100% right and it’s really refreshing to see, I know I’m screwed when a DYI-er starts with “ all you have to do is…”. Keep doing what you’re doing man and you get tons of subscribers, you have a loyal fan here 🫡

[@jgo.m3]

Haha definitely know that feeling. Thanks so much brother.. really appreciate you!

[@HotRodM4]

I didn’t know about Dinan coils 😮 I stuck with the OEM when i did installed NGK spark plugs(.022) a few months back 😅
6:40 I had put a blue rubber glove over the terminal under the hood
Great video as always 💯

[@jgo.m3]

Thanks brother! 🙏
yeah the glove would have definitely been less hassle.. if I trusted myself to not unknowingly knock it off and then touch metal I'd do that 🤣