Ford 2.7L water pump replacement.
Вставка
- Опубліковано 5 вер 2024
- This is how I replaced the water pump in a 2018 Ford F150 with the 2.7l engine.
Please like and subscribe.
This video is not a manufacturers automotive repair video.
I am a shadetree mechanic, not a professional, I'm here just entertaining you.
What I'm doing and how I do it may be wrong and dangerous.
(You could damage yourself and your vehicle)
If you're not a professional, please pay a professional to do it.
If you decide to do the repair yourself, please note that you're doing it at your own risk.
Working on vehicles is dangerous, and I am not responsible for any injuries to any person or for damages to property.
DO YOUR OWN RESEARCH.
I'M HERE JUST TO ENTERTAIN YOU.
Thanks for making this video. All the different camera angles and detailed walkthrough were very helpful.
I'm happy it helped you out.
Please like the video and subscribe to my channel.
Nice video. There is a lot involved for a water pump
Thanks
🎯 Key points for quick navigation:
-
00:00 *🔧 Introduction and Problem Diagnosis*
- Introduction to the video and vehicle details.
- Diagnosis of the water pump issue.
- Mention of parts procurement challenges.
-
02:11 *🛠️ Tool Preparation and Initial Setup*
- Gathering necessary tools and setting up the workspace.
- Preparing to disconnect hoses and remove components.
- Importance of proper tool selection for the job.
-
04:00 *🚿 Hose Removal and Fluid Management*
- Detaching the first hose and managing coolant spillage.
- Steps to safely disconnect and move hoses out of the way.
- Discussion of how leaked coolant affects the removal process.
-
08:17 *🔦 Accessing the Water Pump*
- Visual inspection of the water pump and surrounding components.
- Challenges posed by the compact engine bay and tight spaces.
- Strategy for navigating around the engine components.
-
14:02 *🔩 Removing Additional Components*
- Detailed removal of pipes and connectors to access the water pump.
- Use of various tools to detach tightly secured parts.
- Emphasis on the order of removal to facilitate reassembly.
-
20:44 *⚙️ Disconnecting the Water Pump*
- Steps to detach the water pump pulley and associated bolts.
- Identifying and removing the mounting bolts of the water pump.
- Handling the EGR cooler and related complications.
-
25:17 *📦 Parts Inspection and Comparison*
- Overview of the new water pump and thermostat components.
- Comparing old and new parts to ensure compatibility.
- Highlighting the issue with the missing gasket and its procurement.
-
30:32 *🪛 Continuing Removal and Preparing for Replacement*
- Further dismantling to remove the water pump completely.
- Addressing challenges with tight bolts and connectors.
- Preparing the workspace for installing the new water pump.
-
38:08 *🧩 Final Disassembly and Workaround Solutions*
- Solving issues with difficult-to-reach bolts.
- Techniques for managing unexpected hurdles during disassembly.
- Ensuring all components are removed or repositioned for pump installation.
-
46:18 *🌀 Final Preparation and Installation Discussion*
- Showing the gasket and new O-rings for the EGR cooler.
- Emphasizing the importance of correct gasket placement.
- Preparing to start the installation process with proper seals and gaskets.
-
-
52:22 *🧩 Gasket and Water Pump Preparation*
- Lubricating and positioning the gasket and water pump.
- Ensuring proper fit of coolant pipe and EGR cooler.
- Aligning the water pump with the engine block.
-
55:14 *🔩 Securing the Water Pump*
- Hand-tightening bolts and ensuring even pressure.
- Emphasis on not over-torquing bolts to prevent breakage.
- Methodically tightening bolts starting from the center outwards.
-
59:25 *🔧 Reattaching the Pulley and Other Components*
- Reinstalling the water pump pulley.
- Organizing and securing brackets and connectors.
- Highlighting the systematic approach to avoid misplaced parts.
-
01:03:31 *🪛 Reconnecting EGR Components and Hoses*
- Detailed steps for reattaching the EGR cooler and related bolts.
- Managing tight spaces and ensuring proper sealing.
- Importance of reusing and securing metal gaskets carefully.
-
01:08:52 *🛠️ Final Hose Connections and Assembly*
- Completing the connection of various hoses and clamps.
- Ensuring all components are securely fastened.
- Preparing to reattach the engine cover and coolant reservoir.
-
01:17:02 *🔄 Serpentine Belt Installation*
- Routing and installing the serpentine belt correctly.
- Checking for proper alignment and tension.
- Adjusting components to ensure the belt fits snugly.
-
01:24:41 *🚗 System Checks and Coolant Refill*
- Filling the coolant reservoir and checking for leaks.
- Starting the engine and monitoring for proper operation.
- Observing for any unusual noises or issues post-installation.
-
01:34:11 *✅ Final Adjustments and Conclusion*
- Making final adjustments and securing all components.
- Reviewing the entire process and confirming successful replacement.
- Encouraging viewers to provide feedback and engage with the content.
-
Made with HARPA AI