How to Replace Front Inner Tie Rod 2005-2010 Chevrolet Cobalt
Вставка
- Опубліковано 23 чер 2022
- Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ie/1ASTE00443
This video shows you how to install a front inner tie rod on your 2005-2010 Chevrolet Cobalt. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt
Tools you will need:
• Pry Bar 1aau.to/oid/1AXAA00020
• 18mm Socket 1aau.to/ooh/1AXAA00043
• 19mm Socket 1aau.to/ooh/1AXAA00043
• 21mm Socket 1aau.to/ooh/1AXAA00043
• Inner Tie Rod Removal Tool 1aau.to/oz/1AXAA00062
• Locking Pliers 1aau.to/obW/1AXAA00139
• Needle nose pliers 1aau.to/oe3/1AXAA00051
• Needle nose pliers 1aau.to/oe3/1AXAA00052
• Pliers
• Side Cutters
• 3/8 Inch Drive Ratchet 1aau.to/oDN/1AXAA00015
• Ratchet 1aau.to/oGE/1AXAA00016
• Socket Extensions 1aau.to/oDN/1AXAA00015
• Torque Wrench 1aau.to/otc/1AXAA00044
• Anti-Seize Grease
• Cloth Rags 1aau.to/oeV/1AXSS00035
• Liquid Thread Locker
• Wire Ties
• Hammer 1aau.to/oiD/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation: • Chevy Cobalt 2005-2010...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
Thank you for the no nonsense, straight to the point video and also telling us the socket sizes
Great explanation of the process. Kept it stupid-simple like most videos don't do.
Great editorial Video! On how to replace a inner tie rod very professional.
Just got her done, all she needs is an alignment now thanks alot!
Good video..
Great video bro. Keep it up 👍🏼
Enjoy the video. Learn a lot..👍👍🇺🇸🇺🇸
If you sell the spacer that goes in front of the steering bar, let me know I need them and send me a link to buy it.
Do i need that spacer to put back the new part
Can you please tell me what brand, etc. the inner tie rod tool is?
Same process for electric power steering ?
What is the diameter of large end boot
Ok, this needs to be said undue the tie rod rack first after the boot then measure the old one to the new one and no to a little alignment is needed promise.