How to Replace Rear Engine Mount 2007-12 Nissan Altima
Вставка
- Опубліковано 27 сер 2024
- Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEM...
Like many other load bearing parts on your vehicle, the engine mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens. This video shows you how to install a new made to fit TRQ engine mount on your 2007-12 Nissan Altima
• Check here for more videos on the 2007-12 Nissan Altima: • Nissan Altima 2007-201...
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• 18mm Socket 1aau.to/oof/1AX...
• Ratchet 1aau.to/oGB/1AX...
• Floor Jack 1aau.to/oj2/1AX...
Subscribe: / @trq
Check out our playlist:
Nissan Altima 2007-2012 4th Gen: • Nissan Altima 2007-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Huge thanks to TRQ for this video. I searched and watched a few other videos, this was absolutely the best, the entire series associated with the motor mounts. Took a bit longer than expected, ran into some difficult bolts, but step by step instruction with call outs to bolt sizes was awesome.
Usually the engine is supported by putting a jack under the oil pan. You used a different placement. It almost looks like you're trying to support the transmission. Does that really work for this?
Just replaced all 4 mounts today in my 2010 Nissan Altima. This rear mount created the biggest challenges. In my case, I wonder if the engine had moved. The center bolt would not come out; just spun in place and believe something had shifted and was pinching it. So i decided to try and take the whole bracket out BUT the other bolt on that bracket couldnt be removed because the exhaust was in the way. Putting the new part back in, trying to hold the bracket, having to pry the engine away from mount and holding a light was just more difficult than it should have been. Flat out, the holes did not align on the new part and it was a major pain to force fit it.
For those who you cannot take out the bracket bolt out due to muffler placement. When you're installing it. Do the center bolt first very slightly. And do the stuff one by the muffler very slightly and then do the top to bottom from body ones slightly. And then finish the center bolts and be done with the tightening and torque. The engine side brackets won't tighten up very well if the bracket are well aligned. Be safe.
Clear concise info.
Well done.
Thank you for all your how to videos. You've helped me so much over the years with the many different "verhicals" lol I've worked on. Keep up the amazing work 😎👍
You guys have such awesome videos. Thank you so much. Will the lower engine mount allow the engine to roll backwards when torqued? I do not think the side engine mount is broken, but there is considerable rotation of the engine.
My center bolt and associated bracket was on the opposite side. Head of bolt facing the wheel well.
"Nice and long" lol "nice and tight" smdh ahahaha
Got a clunking sound under hood when car shakes and when purposely rocking side to side, clunk felt with palm on shifter, and engine shakes a bit.. I’m thinking this or another hidden down in the area that might be causing this
That mount is the least of your problems look at all that leaking 😅😅😅
Tanks nice video you help me
Mine is 2011 altima 2.5 s automatic one of the bolts is directly front of exhaust pipe, how you remove that one?
Can I jack on the oil pan?
What kind of issues was the car having that let you know that mount was bad
Good video guys
+Dam You Thanks for watching our video! 1aau.to/m/Shop-TRQ
I've got a peev about the grime the faster mechanics have overcome, but thanks for this really well made video.
This second bolt is killing me. Cant take it out :(
Is this the 3.5 or the 2 liter?
LEN, you can use my Altima as ginnie pig any time. I'M SERIOUS. 😊
No torque specs were used????
According to the service manual for the 2010 model with the QR25DE, those bolts all get torqued to 103 Newton meters or 11 kg-m or 76 ft-lb.
What are those two black bracket on the outside of the mount called?
Will I ever get a response? Find out who knows when, on the never episode/comment...
@@chrisxmichael88 lol my guy it’s called so your own research, call o’Reillys
Are trq mounts good though? I was looking at the active rear hydraulic mounts for 2006 odyssey but most aftermarket mounts suck
+Scott Lanier Yes, the TRQ engine mounts are great! TRQ parts are precision engineered and rigorously tested. TRQ auto parts are manufactured in state-of-the-art facilities, using the highest quality materials, and rigorously tested to ensure ultimate reliability and direct fit for your car or truck.
@@TRQ so do these rear ones to a 2006 odyssey have the hydraulic action with oil and a built in voice coil?
This is not the same rear engine mount as 2006 and 2007 Altima. Do not say that i didn't warn all of you Mr.BackYard Auto Technician...Lol