My Trucking Skills Tip#19 - Angle Backing
Вставка
- Опубліковано 19 гру 2024
- Join Our Discord / discord #trucking #backing #mytruckingskills
The game is called "My Trucking Skills"
The game is available on PC, you can find it on my website, mytruckingskil...
It can be played with any type of controller.
Download for iOS Devices here
apps.apple.com...
Download for Andriod here
play.google.co...
Email me at mytruckingskills@gmail.com For Any Reason
This Trucking Game may not be a view from inside the cab, but it's the most realistic physics that a truck makes where you get to understand how to truck operates in reverse. American Truck Simulator (ATS)and European Trucking Simulator 2 (ETS2) are the best trucking games that you get, and I recommend that you play them, but my game is created for people to just get used to reversing a trailer.
I have heard from so many users that truck schools across the country use my game and use my videos to show their students how to back up.
If you want to make a donation you can do so on my website or the link below, www.mytruckingskills.com
www.paypal.com...
Here is my Facebook Page
/ mytruckingskills
Join my Facebook Group where I give advice most days, by clicking here
/ mytruckingskills
Please go to my website and check out lots of more videos www.mytruckingskills.com
Excellent backing skills!!! You really helped me overcome and succeed in backing!! Thanks so much.. would like to see a video on backing with the locator the tandems and how that changes the way the trailer responds!! Thanks again!!
Thank you for making this. I never really learned angled backing. It seems simplistic but when you don’t know what to do or how to set up, it’s a pain in the ass. Lol thank you
Being there , done there ! Once again u proved ur skills like a pro ! I like taking a good visual assessment before setting up my trailer , if its too narrow its basically it : Bring the trailer as parallel as possible to the surrounding trailers , when pulling out is where it might get tricky cus u dont see the blind side ,just gotta get down and look , always when not so sure , and always when u can't see ( night time) ...G.O.A.L
Cheers dude.
@My Trucking Skills Great video once again David ! I watched and rewound this one a few times. And THIS one is DEF going into my tutorial folder here. This one I think, gives a thorough understanding on what's going on at the front and the back. I appreciated how and when you called attention to "WHEN" you look/turn/stop etc.
No tractors do deal with, that's about the only the easy thing about this back, I feel. Thanks 👍
That’s perfect I was having problems with the set up I wasn’t going far enough past the stop I wanted to go in! David again thank you so much your videos are great and help so much
Thank You David !
That's super !
And super is You like what you are doing ...
Had a dock that was intimidating me yesterday that was backing off a 2 lane street, over railroad tracks and into an inside of the building dock in L.A. while I waited my turn I watched some of your videos and nailed it first shot.
Awesome!!! That's so cool!! What's the address.
@@MyTruckingSkills 4820 e 50th street Vernon CA
@@MyTruckingSkills been 7 years since I’ve driven last and it was my first dock so I was pretty intimidated but it built my confidence
I remember taking a break for a year, it was so weird to get back into the drivers seat. 7 years is a long time.
Ya, I can see that dock being intimidating alright.
I might make a video on it.
David,
Thank you so much for the time and effort you put into your videos. Coordinating all of the cameras must be a treat and a treatment.
Your “45 Degree Back with Guide Lines” helped me better understand trailer motion and using those insights helped me pass my CDL exam.
If you have time I would ask that you elaborate on the third method of this video where you start as in a 90 degree back. I have had a lot of difficulty with the angle back in places where there is very little room and this method looks to be the best in conserving space in front of the tractor.
Thanks again.
(Congrats to Ireland on their 6N win)
i cant really elaborate. my only advice is when you start to jacknife, keep the angle little, dont go crazy and jacknife hard. the further you are from the space the less jackknifing you need to do. and ya, we are kicking arse right now.
Great job. Thanks
Suggestions that weren't mentioned here:
1: You're backing into a super tight hole and get straightened out where you can "see the grass" in the back as you described. At that point everytime you just backed it in like all is good. However, those trailers may not be exactly parallel. The distance between the backs of the trailers could be less than the width of your trailer. A reminder, folks, just because you see daylight when you enter the hole doesn't mean the same amount of space is available at the back end of the whole. Keep checking BOTH mirrors all the way in. Don't put a tell tale gouge on one of those trailers with your door hinge.
2. When entering a very tight hole, be ready to also observe the TOP of the trailers. While you're looking out your mirrors at man-height and it all looks good, one or both of the dropped trailers could be just a tiny bit off level. The difference of the gap at the top of your trailers can be several inches! I have actually wedged my trailer up against another one at the top corners, even though everything was 6" apart at the bottoms. Get out and look (you can't tell if they're leaning during the setup) and be ready to adjust your seat height up and down and mirror height up and down as you squeeze in.
Great videos sir.
Great video on angel backing I am a new driver and backing is something I am not very good at yet
Thank You David
That camera views are great
Very good! now add two or three other trucks lined up behind you and blowing their horns, then trying to get around you when you're trying to line up, another driver hooking the trailer in front of you, the yard dog wanting to hook the trailer beside you, etc. etc. I'm sure newbies will appreciate a dose of the real world in these training presentations?
The next have will have all that. Not easy to create all that AI for a game.
The last back set up makes it close to a straight back. Easier, like it.
This video is very helpful especially when at truck stop and has those angel parking spots, but could u add the tractors to the trailer to see how you would maneuver around those? Please and thanks!!! Also I am now a subscriber
Thank you bro learn lot from ur video
When I was in the military we had shooting range, and 88m truck driving simulators (which were both sooooo much fun but I digress lol) I think trucking schools should invest in simulators. Our AIT trucking simulator put us in real life driving situations. I think it would greatly help with backing for new truckers. Bc of course backing is the hardest part for most.
I would like to see this!!
I really appreciate your videos, I would like to see 90 degree backs between 2 trailers in tight space. If you could show various and different ways of back 90 degree would be great. I thank you for your time and great videos!!
+Yodeep55 ua-cam.com/video/N-YmmkWo_8s/v-deo.html
When you start the turn are you lining up the landing gear with the line of the lane or is there a specific point on your trailer that you were waiting to breach the line to start the turn?
You are the BEST!!! Can you do a video on how to back around curves/ winding roads?
Ok.... How about weave in and out of cones.??
@@MyTruckingSkills ok
Trudy J sounds like the dollar general account
Thanks again
Could you also do a video specifically focused for parking in truck stops where a driver has only one spot between two trucks and there’s not much space in front for maneuvering. Obviously 12 o’clock and then 9 o’clock thing wouldnt work there at all. Thanks
I always have problems parking at truck stop have less space at front . Please guide me a little. Thank you
Would this been a little easier with the wheels all the way back
Thanks for awesome videos with lots of details.
Did you start turning left when your landing gear was in the middle of the parking spot?
Little confusion because trailer next to angle parked is straight. Thanks!
Can you do one with the tandems all the way to back.
👍
What camera do you use to see all the angles??
I use gopro's and a drone
👍👏
Hi, it looks like 30 cm or 12 inches clearance on each side of the hole to back in to. 😂
Mr. Crowley...
If you talk slower and explain more.