How to Install Throttle Position Sensor Repair Kit 2000-2006 Chevrolet Tahoe

Поділитися
Вставка
  • Опубліковано 24 сер 2024
  • Buy Now!
    New Throttle Position Sensor Repair Kit from 1AAuto.com 1aau.to/ia/DMTP...
    This video shows you how to install a throttle position sensor repair kit on your 2000-2006 Chevrolet Tahoe. The throttle position sensor is responsible for informing the engine's computer how open the throttle is, in order to calculate air/fuel ratio. If the sensor in your vehicle is not working properly, you'll likely encounter a lean or rich running condition, have a check engine light, and possibly other problems.
    This process should be similar on the following vehicles:
    2000 Chevrolet Tahoe
    2001 Chevrolet Tahoe
    2002 Chevrolet Tahoe
    2003 Chevrolet Tahoe
    2004 Chevrolet Tahoe
    2005 Chevrolet Tahoe
    2006 Chevrolet Tahoe
    Tools you will need:
    • Pocket Screwdriver
    • 8mm Socket 1aau.to/oa4q/1A...
    • Wire Cutters
    • 1/4 Inch Ratchet 1aau.to/oa4q/1A...
    • 3/8 Inch Drive Ratchet 1aau.to/obm5/1A...
    • Drill
    • Drill Bit Set 1aau.to/oau/1AX...
    • Gloves 1aau.to/oUX/1AX...
    • Heat Shrink Tubing 1aau.to/om/1AXS...
    • Safety Glasses 1aau.to/oNe/1AX...
    • Wire Butt Connectors
    • Hammer 1aau.to/oRL/1AX...
    • Heat Gun
    • Punch
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 10

  • @TRQ
    @TRQ  Рік тому +2

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @DudeEggs
    @DudeEggs 5 місяців тому +4

    Straight to the point and clear. This is the way all auto repair videos should be.

  • @TURBOCAST
    @TURBOCAST 5 місяців тому

    You helped out ALOT!! Thank you!!!

  • @JFproductions91
    @JFproductions91 9 місяців тому +1

    Is there a part number for the M4 screws? I bought the sensor and it didn’t come with the screws

  • @jasmynwillis5347
    @jasmynwillis5347 3 місяці тому

    Can this same process been done for the accelerator pedal position (APP) sensor connector - found frays on some of the wires. Pushing out Code - P2122 which is causing a reduced engine power with no acceleration unless un plug the APP sensor and reconnect.

  • @AnitaNelson-pe6mc
    @AnitaNelson-pe6mc 8 місяців тому +1

    How do I replace

  • @theamazingsahhul1597
    @theamazingsahhul1597 9 місяців тому

    If I do this can this fix my code problem with the circuit of the tps
    It says on the obd
    Are this connectors ok for this kind of job
    ?????

  • @Goldiep796
    @Goldiep796 6 місяців тому

    What size drill bit did you use

  • @AnitaNelson-pe6mc
    @AnitaNelson-pe6mc 8 місяців тому

    A throttle on a 2006 equinox

  • @richnbeauty
    @richnbeauty 8 місяців тому

    .