2017 Nissan Rogue Altima P0456 How to Diagnose and Fix

Поділитися
Вставка
  • Опубліковано 25 сер 2024
  • In this video we show you how to properly diagnose a P0456 code on your Nissan Rogue and properly fix your issue. This diagnostics will work on all other vehicles with this code also. Good luck!

КОМЕНТАРІ • 41

  • @yasirduhham504
    @yasirduhham504 4 місяці тому +4

    Not only eased for us to follow, the camera and lighting you cared to use provided full clarity right there with dark cavities around it, something I miss all the time with so many videos like these, thanking you very much

    • @acetechauto7
      @acetechauto7  4 місяці тому

      No problem and thank you very much for watching!

  • @ACruz-ur1we
    @ACruz-ur1we 7 місяців тому +2

    Had the same code on my rogue and it was the vent control valve, which was an easy fix.

    • @acetechauto7
      @acetechauto7  7 місяців тому

      I’m glad it worked out for you!

  • @victorrodriguez5590
    @victorrodriguez5590 27 днів тому +1

    Thanks

  • @djej2821
    @djej2821 10 місяців тому +1

    Thank you. i have the same code on my car with po443 and po444

  • @giopirmisashvili5514
    @giopirmisashvili5514 2 місяці тому +1

    Thank you

  • @DIYVariety
    @DIYVariety 9 місяців тому +1

    Thanks bud great help see ya on next one

    • @acetechauto7
      @acetechauto7  9 місяців тому +1

      Thanks for watching glad I could help!

  • @DIYVariety
    @DIYVariety 2 місяці тому +1

    Thanks bud

  • @john-atallah
    @john-atallah 11 місяців тому +1

    Thanks! Great video

  • @syedabbas9710
    @syedabbas9710 5 місяців тому +1

    Excellent method 😢

  • @user-nr7mj6zz2u
    @user-nr7mj6zz2u 11 місяців тому +1

    Ещё бы перевести......такая же ошибка на Роге.....
    Я так и не понял-нужно заменить датчик?

  • @MrTwista91
    @MrTwista91 9 місяців тому +1

    Hello, great vid! I changed the solenoid valve exactly like this and im still getting the error code, I've checked the other under the hood too, and cant seem to fix the issue, any ideas?

    • @acetechauto7
      @acetechauto7  9 місяців тому +1

      Did you make sure it sealed properly? If your solenoids are good then you probably have a leak in the evap system somewhere and you’ll have to get it smoke tested.

    • @MrTwista91
      @MrTwista91 9 місяців тому +1

      @@acetechauto7 Yeah I tried to blow through it and it solid, must be a problem elsewhere.. I guess its a good shout to get it tested more thoroughly, Ive done all I can do now. Thanks for the quick reply! much appreciated

    • @acetechauto7
      @acetechauto7  9 місяців тому

      @MrTwista91 no problem hopefully you can get to the bottom of it. Wish you luck!

    • @desr924
      @desr924 8 місяців тому

      @@MrTwista91did you get this solved? What was the issue?

    • @MrTwista91
      @MrTwista91 8 місяців тому

      @@desr924 yeah it was just the solenoid in the end. Super cheap and easy fix. Found one on Amazon for around 15$
      Just took a couple days for the error message to clear. Good luck!

  • @faxmen09
    @faxmen09 9 місяців тому +1

    Excellent demonstrations. What a poor place to put the canister. smh

    • @acetechauto7
      @acetechauto7  9 місяців тому +1

      Very horrible place to put it. Just a matter of time before they all go out

  • @jmfilmsinc
    @jmfilmsinc 9 місяців тому +1

    You have a link for buying the valve online,and how it's is call

    • @acetechauto7
      @acetechauto7  9 місяців тому

      This is the canister purge valve. I don’t have a link as the part we used is the original one from the dealer. If you’re looking for aftermarket you can look up the part number in the video online.

  • @DIYVariety
    @DIYVariety 11 місяців тому +1

    Thanks brother

  • @SolidNashNYC
    @SolidNashNYC 11 місяців тому +1

    Hey great vid. On a scale of 1-5 with being difficult , what would you rate this?

    • @acetechauto7
      @acetechauto7  11 місяців тому

      Hey thank you! I would rate this job a 1 out of 5. Very easy job as long as you have a safe way to lift the car up in the air to get underneath it. Good luck

    • @SolidNashNYC
      @SolidNashNYC 11 місяців тому

      @@acetechauto7
      One think I forgot to ask. The new valve that I purchased has a cover to conceal where the valve opens and closes. In your video it has it exposed. I assume you just took it off to show it in the video or is it supposed to come off?

    • @acetechauto7
      @acetechauto7  11 місяців тому

      @SolidNashNYC that is suppose to be open it might have a cover on it so debris doesn’t get into it but I would take that off.

    • @SolidNashNYC
      @SolidNashNYC 11 місяців тому +1

      Just noticed that I purchased a different valve. The one I have is the canister purge valve which is located in the engine bay. Guess I’ll return it and purchase the one you have in the video. The one I currently purchased looks completely different but that’s what AutoZone sold me when they plugged in their scanner and it popped up the error code.

  • @saadawad3193
    @saadawad3193 5 місяців тому +1

  • @jacare777
    @jacare777 9 місяців тому +1

    Thanks 👍

  • @meshark_t
    @meshark_t 7 місяців тому

    What the part called.
    Is the part the same for Nissan Altima 2010
    Can Blue driver turn on and off power to the valve?

    • @acetechauto7
      @acetechauto7  7 місяців тому +1

      The part is called the canister vent valve and the Altima has one too but it’ll be a different part number. The blue driver won’t be able to communicate with the valve so you’ll have to manually test it as shown at the end of the video.

  • @user-ki1rb6vx7m
    @user-ki1rb6vx7m 8 місяців тому

    Hello! My car was giving us that code and charged even the pump because we ear a noise like sucking gas hard but not sure.
    And the noise still there any suggestions??

    • @acetechauto7
      @acetechauto7  8 місяців тому +1

      You shouldn’t hear any noise back there unless you’re hearing the fuel pump running when the car is on

    • @user-ki1rb6vx7m
      @user-ki1rb6vx7m 8 місяців тому +1

      @@acetechauto7 the noise still there we change the canister purge and nothing I feel very desperate at this point 😖😫 noise is like sucking was coming from the bottom of the car and my car shakes almost to the point of shutting off.

    • @acetechauto7
      @acetechauto7  8 місяців тому +1

      @user-ki1rb6vx7m I would take it in to a shop then because I wouldn’t be able to tell you what’s wrong without seeing it 🤷‍♂️