The P10C has been my primary EDC for 2 years. The ergonomics were so good and I shot it very well too so I ordered the 10F and 10S online within the last 2 months without any trepidation. For me they're virtually the same gun except with different lengths in the slides and grips. The triggers feel the same with that short, fast reset that pushes your finger back out hard for the follow-up shots. I'm keeping all 3 of them! ❤️❤️❤️
I feel the CZ love also. Too many to list here, so far all metal models. This will be my first plastic, except when I bought a H&K VP70 way back when it came out.
If you have trouble concealing a P10s give it up. I have a 365 and a P10s and you need to go run drills with both and then tell me which one you would rather have in a gun fight. Put down the measuring tape and go freakin run them side by side and check your first round on target and split times close up and at distance then give a review.
I have EDC'd a late Czech production P10C for 2 years. It has an ambitious mag release, but came with new mags and striker anti rotation cut in the back of the slide. 12,000rds of absolute perfection. Zero issues of any kind. Stock internals, with Talon granulate grip tape and XS F8 night sights.
So, after watching your personal review and insights, the question I have is, what were you expecting out of this polymer, striker-fired pistol that made you wait a while to get and just be disappointed at the end? What were you comparing it to that left you unfulfilled?
Good question. I love both of of the P10s’s bigger brothers. The P10c is one of my favorite polymer guns and the P10F is an amazing shooter as well. I was expecting to love it out of the box like I did the other two. Thanks for the question and for watching.
Lol i felt that way about the 43x when i had it. I was excited about it, then after having it a lil while i was like Eh, nothing to write home about & left much to be desired lol
You are entitled to say your opinion. I personally think the CZ P 10 line is awesome. Hands down some of the very best at a great price point. Like it so much my Gen 5 G19 is gone. Carry my P10C and am looking for the S. Probably start hunting for one tomorrow in a couple shops in my area.
All personal preference really. I do agree with you that the P 10 line is awesome. I own an absolutely love my P 10 C & P 10 F. The P 10 S is the only one that didn’t agree with me.
I’ve had the p10f and p10s base models for awhile now and both have ran flawlessly, awesome triggers, accurate and I like the ergonomics. I like glocks etc not knocking any of them but imo the p10 series is the best bang for your buck on the market. Base models $300-$400 most places. No other pistols in that price range close to this quality
I was a Glock guy until I bought a P10 F. I just got a P10 S last week. I like it so far. Taking it back to the range this weekend. P10 C will be the next one.
@Germaine Lillard I loved all the reviews on the CZ P10F in fact i bought one and ready to pick it up in 3 days (illinois waiting period) i was so excited and stoked until i watched this. ua-cam.com/video/f7lXm-KGOW4/v-deo.html I went to back and canceled the order and replaced it with Glock 19X gen 5. I really wanted to like CZ P10F... i will still get it but i wont trust my life with it. Have you experienced any of this? Thank you. I still really want the P10F though..
buddahlushious That is the first time that I see this issue. There are many, many reviews on UA-cam for this pistol and none of them seem to have experienced this issue. At least none that I have seen. There are some very reputable guys that I respect and they love this pistol. If you really want one, I suggest finding a store that has them and inspect one. If it has that play then don’t buy it. But I tend to think that it’s a one off issue.
@@Interpolation1911 I usually use 115 or 124 ammo. I've never used 147. No. I've never experienced what Bench 175 showed in his video with my P10 F. I'm anxious to hear what is the response from CZ. I will always have a couple of Glocks in my safe also though. I sold my P10 F and regretted it big time. I bought another one. That is how much I like the P10 series. Maybe it was just an issue with his firearm.
I have a CZ PCR and recently got a P-07. Both are great guns, and keepers. Just bought a P10S and took it to the range. A smooth shooter, mild recoil and very accurate. Sorry you did not like yours, and wonder at this time in November 2021, if you kept it. Mine might be relieving my Shield Plus as my carry gun. And my P-07 is causing me to decide if I want to keep my Gen 5 G19. Tough choices.
I did not keep it. The P10S is gone. Perhaps I’ll revisit this pistol in the future. I love the PCR but with medium size hands, it’s a bit of a stretch for me to reach that hooked trigger shoe when in double action mode. The P07 is awesome. Thank you very much for watching.
I have all three of these pistols and I shot the cz p 10s for the first time yesterday alongside my G48 and p 365. Looking over my target patterns for each, I shot the cz with slightly more accuracy than the p 365 and G48. The groupings were closer with the cz. The only thing I noticed was the aggressive grip on the back of the cz grip was not that comfortable. Besides that I love it more than my p365 and G 48. I love the look, feel and accuracy.
Good video. Thanks. Own this same p10s and it's my best shooter. I share all the same thoughts about this pistol. But, the trigger in this gun is so much better than all my 9 mm handguns. P365 x 2, Glock 19 gen5, Smith shield 2.0 .
If you're not totally happy with it, that's ok. That just how it is. I've purchased firearms and was not blown away like expected. I struggle to shoot my Glock, but I'm dead nuts accurate with my P-10 F. We win some, and we loose some for whatever the reason. Great video, time we'll spent.
Thank you very much for your comment. Yes, I am aware of the optic plate by QVO Tactical. I just couldn’t get my hands on one of them when I needed it.
Thanks for the tip on the plate - although I just started researching this gun today and bought the F model threaded I’d like to use this for occasional EDC and throw the F in my bag with standard cap mags.
Respectfully.. You're prolly much more at ease and accustomed with the Glock brand than this great item you featured. I own the same and I'm definitely sticking with it! Having said that.. I'd say, to each his own preferred brand (and style) of defense. Thanks for the demo.
My p10s replaced my p10c. Getting a p10f soon for HD and OWB use. P10s is a perfect size gun for me for carrying. Small enough to conceal but big enough to fight with and has better recoil then the tiny 9s
@@arikjohnson412 great choice there also. They changed the game for the 43x and 48. Almost no need for a 19 anymore. Just have one of those to carry and a full size for duty use
I LOVED my P10C so I bought the S also. I really like it. But I had to send the S to CZ right out of the gate for feeding issues. Also for anybody that owns an S. Do a quick check for something. Rack a round into the chamber and then drop the magazine to top it off and see if everything is good. Mine out of the box would release the next round in the mag when you dropped the magazine out to top it off. It only did it after you racked a round into chamber then dropped the mag. It is all good now. If that happens to you also, Either send it in to CZ or polish the feed ramp on the barrel. I mainly wanted it because I already had 20 plus P10C mags that will also work in the S. I shoot both of them the same. Probably better than any pistol I have owned.
MDpolo your tabletop review is beyond "lacking" without actually SHOOTING THE GUN. THAT CZ P10S as most of their models when you shoot them you will fall in love with it. How can you say it's hype when you are not even shooting it? That is like test driving a car but sitting in the parking lot and not moving. You can shoot better, faster and more accurate with the CZ than any micro gun and I think current day 2023 people are starting to figure this out and either going "back" to their Glock 19s or CZP10s or they are simply making the micro guns bigger which defeats the whole purpose of the micro gun. The CZP10S is a concealable firearm you can actually carry and shoot very well.
Good and thorough review on a fantastic firearm. Shot the P-10C at my range about a year ago and fell in love. It was just too big for me personally to carry. I waited and searched for the P-10s, and I got lucky on Gunbroker in January. Thanks to COVID and other factors, I just took it out for the first time this past weekend and put a little over 200 rounds through it. I was afraid I had overhyped it and would be disappointed, but my expectations were far exceeded in every way. My experience has been quite different from yours- the gun fits my hand perfectly, balances perfectly, recoils just right for me, and shoots directly at point of aim. I actually started laughing when I put it on the bench and shot dead center on the bullseye. I can be consistent and accurate with other guns, but I have never seen a gun shoot that dead center to where I was aiming. The gun will outshoot you for sure. And it was 100% flawless - no malfunctions. Sorry you were disappointed because I couldn't be happier with my purchase. Hard to see a beautiful CZ not make someone happy. Love the subcompact Glocks, btw. Would love to get a gen 3 G26 someday as well.
Thank you very much for watching and for sharing your experience. It’s wonderful that we live in an era where we can really can find a pistol for just about everyone. By the way, I love the P 10 C. Cheers!
Love my p10s too. I still need more mags. I got two 12 and a 15 ..I need a few more with more rounds. Also want a plus 2 or plus 3 to throw on my 12rounders
Hanguns are like pants. They fit each person differently. That being said, the P365's grip is way too narrow for my hands. I have a P10c and a P10s after owning Glocks previously. My G19 had 5k+ rds through it and the slide was almost as smooth and trigger still wasn't as good as my P10c's out of the box. I now carry my P10s and I absolutely love it. IMO, it's one of the most underrated CCW's out there. Thanks for your review.
You are absolutely right. It’s all about personal choice and what’s best for the individual. Thank you very much for watching and for taking the time to comment. I really appreciate it.
Interesting, good stuff. I just uploaded my first look at it. In the first 3,000 rounds I haven't had any issues with carrying or shooting it. I will say the sights didn't come perfectly centered from the factory.
I BOUGHT 1 P10S THEN I TOOK MY DAUGHTER SHOOTING ONE DAY AND SHE LIKED THE WAY IT SHOT THAT SHE WANTED IT, SO I HAD TO FIND ANOTHER ONE LOL. BOTH ARE OPTIC READY MODELS. P10C IS MY DAILY CARRY
It’s not a question of watching how flippy or not flippy it may be in my hands. It’s a question of how it felt for me. Again there’s nothing wrong with the pistol, I didn’t just like the way it felt in my hands. I’m referring to the shooting impression and the balance of pistol. I fired 400 rounds through it. That’s more than enough for me to figure out if I’m going to like some thing or not. 400 rounds is not a reliability test. Thank you very much for watching. I appreciate your comment.
I think that a lot of people ,when they bought this online without handling it first,we’re under the impression this was a “ micro 9” like the Sig p365 or the Springfield Hellcat and they were somewhat disappointed when they received it. This pistol is actually at the larger end of the spectrum as a sub compact it’s about the size of an HK VP9sk I love mine and for me it’s perfect IMO it has the best out of the box strike fired pistol trigger out there but I can see some people finding the ergonomics to be not to their liking
I cannot argue or disagree with any of your points. It just didn’t feel comfortable in my hand. It’s all personal preference. Having said this, I’m a very big fan of the P10 C and the P10F. Thank you so much for stopping by.
From what I have learned on the web - those shield mags are dubious. The CZ however can take the new F 15 and higher count magazines with a null sleeve adapter from variant - I see someone else has also mentioned this.
I wanted to like it very much. I love my P 10 C and my P 10 F. The P 10 S never felt comfortable in my hand. It felt unbalanced. I’m sure it’s just me, but I never gelled with it. Thank you very much for stopping by.
I got to use a P10s at the range a while ago and I fell in love instantly. I already own an F and it's my favorite poly gun. I think i'll end up buying the M, S, C, and F eventually lol.
I've never liked the trigger feel of Glocks with that creep/roll after the wall before it breaks (due to the safe action system). I thought I'd like the CZ P10 series but I was wrong. The M&P 2.0 models have a trigger that is much closer to what I'm used to from hammer-fired pistols.
@@imrankhawaja410 I asked myself the same question... I bought for increased concealability and was expecting some tradeoffs.... I was expecting it to be snappy and it wasn't. At all! I was also expecting to be weirded-out with the three finger grip. Also, not an issue. Plus it is smooth and accurate. Just really surprised by its performance and not having any of the undesirable attributes I thought it would.
Its ok that you don't love it. Not every gun is gonna be awesome for every person. You mentioned you have medium size hands in the video and that might be a reason why this gun is not working for you. I have large hands and I prefer the P10-S especially over the Sig 365. I wont even consider buying a 365 for this reason. I realize the P365 is a great gun but the small grip is a deal breaker for me. That being said, I really like the Glock 43x/G48 too. The grip on the G43x is bigger than 365 so it allows me to get a good grip. With the addition of the Shield Arms 15rd mag its a no brainer as a carry gun for me. I do agree the build quality feels better on the CZ P-10S over the G43x but I prefer the G43x for carry because its thinner and lighter.
I agree. Also, I had the same problem with the 365 even though I have medium-size hands. So what I did was installed the XL grip module on the regular 365 and now it works perfect for me. Also my 48 with the S -15 mag is awesome. Thank you for watching and for your kind words.
YES! You're off Your Rocker. I wish when people would do their review to just stick to the gun review and their operations without INTERJECTING their subjective Opinions. IE...opinions about sights, and types, three dot sights vs darkened rear sights, and grips, etc because what you may not like, others may like or love about it. So hence, stick to the guns operational functions. Run the test also with different types of ammos and grains such 115 grains FMJ, 124, and 147 grains regular ammo or with +P hollow points, etc. Those would be tremendously helpful. And, if the higher grains would cause a malfunctions like other have said then you've personally verified that issue and your viewer will appreciate that. Enough said! 💯💯👍👍
Wonderful review. I’m still hyped about the CZ. I have 6 Sig’s and want to try something different. I have 5 CZ’s but this would be my first pistol. I’ll track down you other P-10 Reviews. Thank you again for a great video! Subscribed!
Great review as usual. I have pretty large hands so I would probably need the large base plate so I might as well stick with my P10C which is not that much different in size. You just saved me some money! By the way, here is a company that makes a mag sleeve adapter...it's called the Null from Variant innovation. It allows you to use the 15 or 17 rounds mags in this pistol.
I think the size and profile of this gun is perfect. It's practically the same size as my PPQ SC. I have medium hands an I prefer guns that are a little thicker. Haven't decided on which optic to run yet though.
I’m a little late here, I see comments that were posted a year + ago. I’ve had my P-10 S for a little over a year now and have to say that I love this pistol. It feels good in my hands but I like the fatter grips. I have the fatter back strap installed on it. I shoot very well with it and have had no issues with feeding. I have shot steel casing and brass casing both with no issue. I’ve even recently shot some of the new Sergeant Major zinc plated casing through it and no issues at all. It shot very well actually. Its my EDC for the most part. I do swap out with one of my revolvers some but it goes with me most of the time. I added HYVE 3 round extensions to my mags to not only increase number of rounds but add some grip at the bottom of the mag well. I like to have 3 fingers on the grip for stability. But yeah, this is a fantastic pistol and I have no complaints at all. There’s nothing more you could ask from a semi auto in my opinion. I hate your experience was less than that. I don’t recall hearing or reading any negative comments or reviews on the P-10 S. Not that yours was really all that negative. I appreciate your honest opinion and detailed review. Thank you for that. I wonder if since posting this video you have had a change of heart about the P-10 S?
You know, it’s been on my mind to give it a second chance. But, I’ve been reluctant to spend the money again. My EDC at this time and has been for a while is my HK VP9SK. Which I love and shoot very well. From time to time I will pick up a revolver or my custom Glock 48. Who knows, maybe I’ll give the P-10s another shot. Thank you very much for watching and for taking the time to comment. I really appreciate it!
Hey no problem, you can tell when somebody puts genuine thought into the videos they post as opposed to the people that post a video and haven’t really taken the time to put together complete sentences let alone a several minute video. I start watching a lot but finish few. It was a good video. As far as the pistol, I get it. I wouldn’t want to spend the cash again if I don’t have a good feeling about the firearm. I own many from AR’s to Shotguns, revolvers, semi auto’s, target competition pistols, short, medium, and long range rifles ( love shooting for distance and accuracy), to some that j just bought because they were different. But they all have one thing in common, they fit me and I’m comfortable with them. It’s a curse maybe. I buy but seldom do I sell. Thanks for the video man, have a good one and never stop shooting. Oh and.......Let’s go Brandon!!
MDpolo Gun Channel one more then I’m gonna stop buggin you. You love your VP9SK, have you tried the Canik TP9 series. I have two, the TP9SF and the TP9SFX. Absolutely love these firearms. Great prices on them and they shoot fantastic. I don’t have the sub compact model yet so I don’t use it for EDC but I’m workin on gettin one. Then I’ll rotate it and the P-10 S probably. No malfunctions and I’ve run all kinds of ammo through them. Check them out if you haven’t. Very nice handguns. Later.
I have the P-10F and I love it. I had the first gen P-10C and I hated it because the magazine release sometimes would work, it didn't matter which side I used the magazine release. I got rid of it.
I have not tried the P10F but I hear great things and I have a P10C (1st gen) with no issues, but I have heard from many people about the mag release issues that you mention. Thanks for watching.
Have the P10c gen 2. They removed the full ambi mag release and just made it reversible if the shooter wants to switch it. Love it. The best slide release ive used on a pistol. It is practically spring loaded and has no problems.
Like it much, much better than a Glock 26, 43, or even 19. Only firearm in the size category that rivals it (in my opinion) is the H&K VP9 SK or the P30 SK
Anytime a sight is added to to slide, the character of the shot, recoil and return to target are changed. Added mass changes the dynamic..some more than others.
Yes, but you would think that when a pistol comes ready for a red dot from the factory, the manufacturer took all that into consideration. At least they should have. Thank you very much for stopping by.
Size is always a trade off. I love the size of the p365 but when push comes to shove I can draw a little larger gun like the p10c s much better. Carrying a micro size gun doesn’t do squat if you can’t employ it.
I agree with you. That’s why I didn’t start carrying my P365 until I installed the XL frame module. And it is the same reason why I feel more comfortable with the Glock 48 and the S 15 mag is a plus.
I own a few CZ and he neglected to mention that the P10s accepts magazines not only from the 10C, but the 10F, the P-09 and 07. So you can manage 21+1 if you're running the +2base P09 mags. Mine came +2 on purchase but that may not be standard.
Actually it does not take every magazine. Lol. CZ came out with new magazines with two slots in them versus one so if you try to use old ones they wont eject with mag release button and you will get a double feed and be forced to yank the mag out by hand.
@@WheresWaldo05okay and🤨? You little dick twat save your insults for someone else, I know how my firearms work. Now if you had read instead of being so ready to talk, like a woman, logic would've shown u my initial statement was correct. Never said "EVERY" first off, secondly all the new magazines are made to be universal why would I mention old ones that aren't being manufactured for these models anymore? 10s owners know this and I labeled the specific models that were compatible. If you got a magazine stuck means didn't do your homework in the first place, so who's really the dolt? Better people think you're an imbecile than speak and confirm it true, you rogue scholar you🙄 foh
I got my P10S, not optic ready, for $399.99, but i live in a low capacity magazine state, so its not all wins. Amazing pistol tho. Mine is also from the Czech Republic, and the ones i have seen from Kansas City, KS have had some imperfections on the polymer lowers.
Yes, you are correct. There is a pistol out there for everyone and that’s what makes the error that we’re living in so amazing. I love the P 10 C and although I don’t own it, I think the P 10 F is fantastic. I just didn’t get along with their little brother. Thank you very much for watching.
Bought the P-10S OR over a month ago and the trigger while is not the best out of the box, it’s much lighter / better than the trigger on my P-10c. Could not resist the low prices ($350) on this gun and decided to give it a try. Well, I really enjoyed the P-10S’ ergonomics, low recoil and shot extremely accurate. Thinking on keeping this gun and possibly sell the Compact. Thanks for the video.
Great gun - got one without the RMR last summer and sent it off to Primary Machine and had them mill the slide with a Holosun optic. Couldn’t find the optic ready version.
Thanks. I really enjoy your no nonsense, honest reviews/opionins. I had to chuckle when you mentioned you hate the gap between the optic and the slide. I had CZC mill my P01 steel frame slide and install their adapter plate for an SRO. I also have a gap and honestly hate it as well. Purely an aesthetic thing, but still, I can't not see it 🤣🤷🏻♂️
I'm going to install a Holosun 508T on mine. Sorry if I missed it but can you co-witness with those stock sights? If so, where did you get your adapter plate please?
+very dark passenger I talk about the red dot around the 05:00 min mark. The plate came from CZ Custom. The sights that came with the pistol, do not co-witness with the 407C using this particular mounting plate. It is close, but just not tall enough.
@@MDpolo Thank you for the information. I was able to locate an adapter plate/raised sights combo package for a reasonable price, however they are backordered. I guess I'll just have to go without for a while.
After 3yrs has your mind changed? I just bought one, waiting on the transfer. I shot a buddy's and instantly fell in love... maybe things like a pinky extension, grips and trigger "upgrade" make all the difference but from what I've seen the concensus is that it's pretty much best in class... especially for the price. Also, I noticed ppl saying QVO makes a good optics plate... hopefully they have one in stock 🤞Thanx for the review! 😎
My pain has changed. I made a follow up video on it. I don’t think you’ll be disappointed at all. Thank you for your kind words and for taking the time to stop by.
The proper plate which will fill in that horrible gap is sold on MidwayUSA, and as of the time of me writing this is in stock. This is where I got mine and confirm that it does indeed fill in the gap. Same plate as CZ P10 C.
Very thorough. I have a P10C made in Kansas, and a P10S made in the Czech Republic. There is definitely a quality difference between the two. The mill marks that were present on the C were not there on the S. I also have a P09 and Shadow 2 from the Czech Republic. They are flawless. Superficial, I know, but there is definitely an observable difference.
Got a link for buying the extended longer magazine? The +13 one that fits nice and flush? I cant find it online. I dont like the smaller one with pinky hanging off. Or using an extra long mag that looks wonky and doesnt fit aesthetics of the gun grip.
I have the P-10S in OD green. Drives nails at the range. No functional issues with mine. My only minor complaint is I don't care for the stippling on the front and back of the grip, the edges are fairly sharp but that's easy to fix with a talon grip. And I don't like that the back strap has a roll pin (with little teeth on it) through it. Took some finagling to get it out and back in without damaging anything. It's more tedious to change than need be in my opinion.
I saw a P -10S in OD green the other day at the gun shop. First time I see one in person. It looks pretty cool! The pins on my P 10 F were an absolute nightmare to remove and then install again. To the point that I never want to touch them again. Thank you very much for watching!
If you have access to a range that has both in their rental counter, I highly recommend shooting them before making a decision. They shoot totally different. At least for me. Thank you for watching.
Beautiful gun, was going to buy one and ended up buying a Taurus g3, and a g3c, two boxes of ammo for the price of it, happy with both guns no problems, will save money for this one next time great gun. Good Video 👍
@@MDpolo thanks for asking this question Javed, and thanks for answering MDpolo. As an owner of an APX Centurion, waiting on the grip for the Compact to arrive, and also considering picking up the CZ P-10S, this is great to know!
It really depends on whether you prefer a striker fired or a hammer fired pistol. I also agree with +Heath En Ovthanorth and my P07 has to go to Cajun Gun Works but now it is awesome and will never sell it. The P10c is fine out of the box. Striker fired or hammer fired, that is your decision.
I have the P10c OR, after carrying it for a few days, realized I want a slightly smaller gun for 8-10 hour carry days, I believe the P10s might be that gun?
It’s all personal preference. The P 10 S is not that much smaller than a P 10 C. Of course the main difference is the length of the grip and it will be a little lighter because you’re only carrying 12 rounds.
I’ve heard some people having issues with the first generation of mags from Shield Arms. Most people that I know and own them have nothing but good things to say about them. I have three of them and all have been 100% reliable. I actually have two gen 2 mags on order to test them. Thank you very much for watching!
when you compared the guns with mags in to show if there was any rattle when you shook them you used a Shield Arms mag in the Glock. I have a Glock 43X that does the same thing with the Shield Arms mags but almost nothing with the OEM mags. I went back to using only the OEM Glock mags for continuous failure to feed/feed ramp jams with the SA S-15 mags, but they did rattle a little as you demonstrate. Probably a petty point but...
That’s a good question, but I cannot speak to it because I have never handled a n Arex Delta pistol. I’ve been looking for one, but no luck so far. So regrettably I cannot give you an opinion there. Thank you very much for watching.
yeah you're completely off your rocker. i know it's all about personal preference BUT the CZP10S beats the 48 and the 43X in every category BUT capacity. it's a shame really because with more rounds it should be the preferred pistol. i have the 19/43 and the 43X. have owned the P10C and the Glock 26 so i include all of those. i have YET to own or fire the P365 so i cant intelligently include that pistol.
Thank you very much. I purchased the grip module from Osage County Guns and then had it stippled by Rocket City Stippling in Alabama. Thank you for watching!
Yeah that gap sucks. What's really bad is that you would be way better off buying a Czech Republic made P10 (they are better fit and finish) but would be non optic and then simply have the slide milled for your optics. That's what serious people do with the P10-C. The Kansas City made P10's do not have a cold hammer forged barrel like the Czech made ones.
So you're saying that it doesn't shoot like a full size gun? Who would have thought. I have a 365 XL and I have never liked the way it shoots. I honestly prefer the lowly Taurus G2 to the 365
There are better guns for comfortable carry and there are better guns for fighting but the P10S is the best do it all gun on the market. It's big enough to fight with and small enough to carry. It's basically the Glock that Glock should have made that is between the 19 and 26 in size
Great video !! It was on my list to try , but are few and far between. I shot the P365 poorly . Due to size , I have big hands , the 365XL would probably suffice. My best shooter is the HKVP9SK and believe it or not a gun half the price of the HK ,..... a Canik TP9SC !! 🇺🇸😃
I have medium size hands and for me the regular P365 was too small. However I installed the XL grip module on it and now I love it. I love shooting the HKVP9SK, however it is a bit chunky for my taste to carry versus capacity. Thank you very much for watching!
Nice review but I don’t see how that extended mag for the Glock can hold 5 more rounds with only adding 1/4” more length to the grip! While the CZ only adds 2 rounds ? I love my CZ10c ……shoots amazing , trigger is awesome , ergonomic are great etc …..I probably love mine even more cause I got a screaming deal on it while I was at a gun shows a number of years ago…..$300 out the door brand new! It’s in my top 5 favorite pistols!
I'd say if the g43x puts a rail then it might beat the p10s but idk. p10s is just so pretty compared to the glock and you'd still have to upgrade the glock sights and mill it for a reddot. Sure its thinner but guys don't give a crap about that. or do they?
Just to be very clear.. in EU the P365 costs almost as much as 3 CZ P10 S would.. Idk why tbh. Are Sig's just that expensive over all.. and if so. WHY the F are they with all the lawsuits and whatever and QC problems they had. Makes no sense.
Been on my short list for a long time. However, you are the second person I follow that is not in love with the CZ p10s. I waited so long to find one, I'm over it. I bought the FN 509c. It's the best compact I've shot. Points really well, super accurate and great ergonomics.
Just because one individual, with no particular expertise in firearms, didn't like the CZ P10 model, that does not make it a "bad" pistol for everyone else. I can attest to the fact that my two CZ P10 F and C are proven RELIABLE, VERY ACCURATE and with a SMOOTH TRIGGER PULL second to none! I have nothing but praises about my CZ pistols. Hence, your OWN PERSONAL OPINION about the CZ is meaningless to me, because I know better. I have two superb, outstanding modern combat handguns. CZ is renowned WORLDWIDE. I have nothing against Glock, they are great handguns. But I prefer my CZs.
You said it correctly at the end. You prefer the pistols that you like. I prefer the pistols that I like. It’s all personal preference. Yes, this is my channel and my personal opinion. I’ve said it many times that this is a very good pistol but I just wasn’t for me. In return your resort to personal attacks. God bless you and have a great life.
@@MDpolo indeed, here in your channel you "reign," but can you share your credentials and expertise on firearms?... Thanks. Your feelings got hurt because you prefer agreement and approval to your own personal views and opinions. I expressed my opinion just as much as you are entitled to. Relax. Enjoy your Glocks.
@@MDpolo Shot mine for the first time today. I did have it pinching my pinky a little bit. I found it strange. Did you notice that the slide didn't remain open sometimes after you completed shooting?
I did experience the slide not locking back on me a couple of times but that was me riding the slide lock/slide release lever. As far as the pinching that you mention, I did not experience that although I have heard of many people complaining about it.
If you are in a real hurry, you can purchase this pistol and if it is too small, install the +2 mag extension. It will give you almost the same capacity and grip length of the P 10 C. Thank you for watching.
@@MDpolo i just wasnt sure if you knew that, there were a few times throughout the vid that you said the 10 came with a 12 rnd mag and at one point mentioned the +2 made it 14. Probably just tongue twisted between talking about the 2 different pieces.
Pinnacle Firearms in Carmel Indiana has two P10s and one P10c Tactical in the cabinet. At least they did as of yesterday afternoon. Thank you for watching!
Thank you very much. I would not discount this pistol because of my experience. I would recommend that you find a gun range that has one for rent and try it out next to the 43X.
@@MDpolo yeah my brother has a 43x and a 48 I've yet to fire the 43x would be tough to find a local range with a cz p10s think my range might have a full size though.
I see u have rhe holoson 407c or 507c... I'm wanting to get the 507k for my p10s.. will it fit ? I'm new to pistol optics and if so what kind of plate will I need and rmr plate? Thanks for your help
I have the 407c on this pistol. I didn’t care for the extra features and cost of the 507c. I don’t know if the 507K will fit this pistol, but for the 407C or 507C you can order the plate made for the RMR. It is the same footprint. Thank you for watching.
Look at the second post here for pics www.glocktalk.com/threads/c-h-precision-weapons-507k-adapter-plate.1876352/ You'll need this plate chpws.com/product/cz_507k
The P10C has been my primary EDC for 2 years. The ergonomics were so good and I shot it very well too so I ordered the 10F and 10S online within the last 2 months without any trepidation. For me they're virtually the same gun except with different lengths in the slides and grips. The triggers feel the same with that short, fast reset that pushes your finger back out hard for the follow-up shots. I'm keeping all 3 of them! ❤️❤️❤️
Fantastic! It’s awesome when you find a gun that fits you so well. Thanks for watching!
Do you find that the p10c and p10s have the same recoil?
I feel the CZ love also. Too many to list here, so far all metal models. This will be my first plastic, except when I bought a H&K VP70 way back when it came out.
Love the gun I have a pdp 5” and shot the p10c about as good was very impressed
If you have trouble concealing a P10s give it up. I have a 365 and a P10s and you need to go run drills with both and then tell me which one you would rather have in a gun fight. Put down the measuring tape and go freakin run them side by side and check your first round on target and split times close up and at distance then give a review.
Thanks for the advice. I’m not a beginner at this and I have done what you suggested. Thank you very much for watching.
I have EDC'd a late Czech production P10C for 2 years. It has an ambitious mag release, but came with new mags and striker anti rotation cut in the back of the slide. 12,000rds of absolute perfection. Zero issues of any kind. Stock internals, with Talon granulate grip tape and XS F8 night sights.
Sounds like a sweet set up. I love the P 10 C. Thank you for watching!
Made in the Czech Republic?
You dont buy a subcompact for high capacity. Extended mags defeat the purpose of small firearm
You have pockets for those.
More>Less
So, after watching your personal review and insights, the question I have is, what were you expecting out of this polymer, striker-fired pistol that made you wait a while to get and just be disappointed at the end? What were you comparing it to that left you unfulfilled?
Good question. I love both of of the P10s’s bigger brothers. The P10c is one of my favorite polymer guns and the P10F is an amazing shooter as well. I was expecting to love it out of the box like I did the other two. Thanks for the question and for watching.
Lol i felt that way about the 43x when i had it. I was excited about it, then after having it a lil while i was like Eh, nothing to write home about & left much to be desired lol
You are entitled to say your opinion. I personally think the CZ P 10 line is awesome. Hands down some of the very best at a great price point. Like it so much my Gen 5 G19 is gone. Carry my P10C and am looking for the S. Probably start hunting for one tomorrow in a couple shops in my area.
All personal preference really. I do agree with you that the P 10 line is awesome. I own an absolutely love my P 10 C & P 10 F. The P 10 S is the only one that didn’t agree with me.
I was a Glock boy until I shot a P-10.
Comparing a p10s which is designed to compete with a Glock 26 with a clock 48 ie a little disingenuous 😮
Glocks are good.. but CZ, S&W & HK are just better
Same here!
I was a Glock boy until I peed on a Glock.
I’ve had the p10f and p10s base models for awhile now and both have ran flawlessly, awesome triggers, accurate and I like the ergonomics. I like glocks etc not knocking any of them but imo the p10 series is the best bang for your buck on the market. Base models $300-$400 most places. No other pistols in that price range close to this quality
At current prices, they are fantastic values. Thank you very much for stopping by.
I was a Glock guy until I bought a P10 F. I just got a P10 S last week. I like it so far. Taking it back to the range this weekend. P10 C will be the next one.
I love my P10c and the F is next on my list. Thank you very much for watching.
@Germaine Lillard
I loved all the reviews on the CZ P10F in fact i bought one and ready to pick it up in 3 days (illinois waiting period) i was so excited and stoked until i watched this.
ua-cam.com/video/f7lXm-KGOW4/v-deo.html
I went to back and canceled the order and replaced it with Glock 19X gen 5. I really wanted to like CZ P10F... i will still get it but i wont trust my life with it. Have you experienced any of this? Thank you. I still really want the P10F though..
buddahlushious That is the first time that I see this issue. There are many, many reviews on UA-cam for this pistol and none of them seem to have experienced this issue. At least none that I have seen. There are some very reputable guys that I respect and they love this pistol. If you really want one, I suggest finding a store that has them and inspect one. If it has that play then don’t buy it. But I tend to think that it’s a one off issue.
@@Interpolation1911 I usually use 115 or 124 ammo. I've never used 147. No. I've never experienced what Bench 175 showed in his video with my P10 F. I'm anxious to hear what is the response from CZ. I will always have a couple of Glocks in my safe also though. I sold my P10 F and regretted it big time. I bought another one. That is how much I like the P10 series. Maybe it was just an issue with his firearm.
@@MDpolo I did and checked out the P10F at the gun store and the barrel has the same amount of play.
I have a CZ PCR and recently got a P-07. Both are great guns, and keepers. Just bought a P10S and took it to the range. A smooth shooter, mild recoil and very accurate. Sorry you did not like yours, and wonder at this time in November 2021, if you kept it. Mine might be relieving my Shield Plus as my carry gun. And my P-07 is causing me to decide if I want to keep my Gen 5 G19. Tough choices.
I did not keep it. The P10S is gone. Perhaps I’ll revisit this pistol in the future. I love the PCR but with medium size hands, it’s a bit of a stretch for me to reach that hooked trigger shoe when in double action mode. The P07 is awesome. Thank you very much for watching.
I have all three of these pistols and I shot the cz p 10s for the first time yesterday alongside my G48 and p 365. Looking over my target patterns for each, I shot the cz with slightly more accuracy than the p 365 and G48. The groupings were closer with the cz. The only thing I noticed was the aggressive grip on the back of the cz grip was not that comfortable. Besides that I love it more than my p365 and G 48. I love the look, feel and accuracy.
Thank you very much for sharing your experience and I’m glad that it works for you. It’s a well-made pistol. Thank you for watching!
Good video. Thanks. Own this same p10s and it's my best shooter. I share all the same thoughts about this pistol. But, the trigger in this gun is so much better than all my 9 mm handguns. P365 x 2, Glock 19 gen5, Smith shield 2.0 .
If you're not totally happy with it, that's ok. That just how it is. I've purchased firearms and was not blown away like expected. I struggle to shoot my Glock, but I'm dead nuts accurate with my P-10 F. We win some, and we loose some for whatever the reason. Great video, time we'll spent.
Thank you very much for your kind words and for watching. I appreciate it.
@@MDpolo You're welcome Sir.
I love my CZ P-10C but I really love my P-10S! Just a heads up, QVO Tactical makes a better fitting optic plate than the one from CZ or CZ Custom.
Thank you very much for your comment. Yes, I am aware of the optic plate by QVO Tactical. I just couldn’t get my hands on one of them when I needed it.
Thanks for the tip on the plate - although I just started researching this gun today and bought the F model threaded I’d like to use this for occasional EDC and throw the F in my bag with standard cap mags.
@@arikjohnson412 I believe that the optic plate from qvo fits the f as well but you will have to reach out to qvo to verify.
Thanks for this review! Even though it’s now 3 years old this helps a ton
Glad it was helpful! Thank you very much for taking the time to stop by.
Respectfully..
You're prolly much more at ease and accustomed with the Glock brand than this great item you featured.
I own the same and I'm definitely sticking with it!
Having said that..
I'd say, to each his own preferred brand (and style) of defense.
Thanks for the demo.
You are very welcome. I did post a follow up video. Thank you very much for stopping by.
My p10s replaced my p10c. Getting a p10f soon for HD and OWB use. P10s is a perfect size gun for me for carrying. Small enough to conceal but big enough to fight with and has better recoil then the tiny 9s
Thank you very much for watching!
That’ll be my strategy as well with the Shield Arms mags.
@@arikjohnson412 great choice there also. They changed the game for the 43x and 48. Almost no need for a 19 anymore. Just have one of those to carry and a full size for duty use
I LOVED my P10C so I bought the S also.
I really like it. But I had to send the S to CZ right out of the gate for feeding issues.
Also for anybody that owns an S. Do a quick check for something.
Rack a round into the chamber and then drop the magazine to top it off and see if everything is good.
Mine out of the box would release the next round in the mag when you dropped the magazine out to top it off. It only did it after you racked a round into chamber then dropped the mag.
It is all good now.
If that happens to you also, Either send it in to CZ or polish the feed ramp on the barrel.
I mainly wanted it because I already had 20 plus P10C mags that will also work in the S.
I shoot both of them the same. Probably better than any pistol I have owned.
Thank you very much for the information. I also appreciate you taking the time to comment and to watch my videos. Cheers!
Thank you
I've had my P10 s for years. Love it
MDpolo your tabletop review is beyond "lacking" without actually SHOOTING THE GUN. THAT CZ P10S as most of their models when you shoot them you will fall in love with it. How can you say it's hype when you are not even shooting it? That is like test driving a car but sitting in the parking lot and not moving. You can shoot better, faster and more accurate with the CZ than any micro gun and I think current day 2023 people are starting to figure this out and either going "back" to their Glock 19s or CZP10s or they are simply making the micro guns bigger which defeats the whole purpose of the micro gun. The CZP10S is a concealable firearm you can actually carry and shoot very well.
Sir, I shot this pistol quite a bit. And for reference, I love my P 10 C and my P 10 F.
Good and thorough review on a fantastic firearm.
Shot the P-10C at my range about a year ago and fell in love. It was just too big for me personally to carry. I waited and searched for the P-10s, and I got lucky on Gunbroker in January. Thanks to COVID and other factors, I just took it out for the first time this past weekend and put a little over 200 rounds through it. I was afraid I had overhyped it and would be disappointed, but my expectations were far exceeded in every way. My experience has been quite different from yours- the gun fits my hand perfectly, balances perfectly, recoils just right for me, and shoots directly at point of aim. I actually started laughing when I put it on the bench and shot dead center on the bullseye. I can be consistent and accurate with other guns, but I have never seen a gun shoot that dead center to where I was aiming. The gun will outshoot you for sure. And it was 100% flawless - no malfunctions.
Sorry you were disappointed because I couldn't be happier with my purchase. Hard to see a beautiful CZ not make someone happy.
Love the subcompact Glocks, btw. Would love to get a gen 3 G26 someday as well.
Thank you very much for watching and for sharing your experience. It’s wonderful that we live in an era where we can really can find a pistol for just about everyone. By the way, I love the P 10 C. Cheers!
Love my p10s too. I still need more mags. I got two 12 and a 15 ..I need a few more with more rounds. Also want a plus 2 or plus 3 to throw on my 12rounders
Hanguns are like pants. They fit each person differently. That being said, the P365's grip is way too narrow for my hands. I have a P10c and a P10s after owning Glocks previously. My G19 had 5k+ rds through it and the slide was almost as smooth and trigger still wasn't as good as my P10c's out of the box. I now carry my P10s and I absolutely love it. IMO, it's one of the most underrated CCW's out there. Thanks for your review.
You are absolutely right. It’s all about personal choice and what’s best for the individual. Thank you very much for watching and for taking the time to comment. I really appreciate it.
Love it. Just ordered one. I have a P10C already and it's been an absolute beast
I agree with you. I love my P10c. Thank you for watching!
You stole my thumbnail 😡😠 lol
@@RepentorPerish77 yours is cleaner than mine though. Had this one for probably 6 or 7 months
Who stole your thumbnail??
@@MDpolo I think he was referring to his avatar image as a joke. Lol. Hopefully he didn't actually lose a thumbnail under any circumstances
Just picked up one of these today. Probably hit the range on Monday to try it out.
Congratulations. Let me know how you like it. Thank you for watching.
Interesting, good stuff. I just uploaded my first look at it. In the first 3,000 rounds I haven't had any issues with carrying or shooting it. I will say the sights didn't come perfectly centered from the factory.
Good stuff. I’ll take a look at yours. Thank you for watching!
How did you adjust sights?
Loved it so much I had to get 2 of the optic ready models
That’s awesome. Congratulations! Thank you for watching.
I BOUGHT 1 P10S THEN I TOOK MY DAUGHTER SHOOTING ONE DAY AND SHE LIKED THE WAY IT SHOT THAT SHE WANTED IT, SO I HAD TO FIND ANOTHER ONE LOL. BOTH ARE OPTIC READY MODELS. P10C IS MY DAILY CARRY
I love my p10S more than my C now XD
Dude, same. I felt bad about it for a while haha
Without any range footage I don’t fully understand your issue?
And how many rounds / times you fired it in order to accustom to the weapon?
It’s not a question of watching how flippy or not flippy it may be in my hands. It’s a question of how it felt for me. Again there’s nothing wrong with the pistol, I didn’t just like the way it felt in my hands. I’m referring to the shooting impression and the balance of pistol. I fired 400 rounds through it. That’s more than enough for me to figure out if I’m going to like some thing or not. 400 rounds is not a reliability test. Thank you very much for watching. I appreciate your comment.
I think that a lot of people ,when they bought this online without handling it first,we’re under the impression this was a “ micro 9” like the Sig p365 or the Springfield Hellcat and they were somewhat disappointed when they received it. This pistol is actually at the larger end of the spectrum as a sub compact it’s about the size of an HK VP9sk I love mine and for me it’s perfect IMO it has the best out of the box strike fired pistol trigger out there but I can see some people finding the ergonomics to be not to their liking
I cannot argue or disagree with any of your points. It just didn’t feel comfortable in my hand. It’s all personal preference. Having said this, I’m a very big fan of the P10 C and the P10F. Thank you so much for stopping by.
From what I have learned on the web - those shield mags are dubious. The CZ however can take the new F 15 and higher count magazines with a null sleeve adapter from variant - I see someone else has also mentioned this.
I have several Shield mags of all generations. Thousands of rounds through them and zero problems.
Thanks for the review. While I suspected you didn't like it from the very beginning, I was more interested in exactly what you didn't like about it.
I wanted to like it very much. I love my P 10 C and my P 10 F. The P 10 S never felt comfortable in my hand. It felt unbalanced. I’m sure it’s just me, but I never gelled with it. Thank you very much for stopping by.
I got to use a P10s at the range a while ago and I fell in love instantly. I already own an F and it's my favorite poly gun. I think i'll end up buying the M, S, C, and F eventually lol.
That’s awesome! Thank you very much for watching.
Don't forget the SC
I have yet to see the SC in person. Looking for one though. Thank you for watching.
If you’re serious about scoring an M, do share how you managed to obtain it. Such a clever yet elusive firearm.
I love mine!!!!! RMR is on top and it shoots great.
You're missing that you have a unique hands and unique preferences, and that doesn't make you off your rocker.
Thank you very much for watching and taking the time to comment. Pistols are individual things. Cheers!
I've never liked the trigger feel of Glocks with that creep/roll after the wall before it breaks (due to the safe action system). I thought I'd like the CZ P10 series but I was wrong. The M&P 2.0 models have a trigger that is much closer to what I'm used to from hammer-fired pistols.
I have the P-01, P-07, P-09, SP-01 and recently got the P-10S... Although I love all of my CZs, the S is my favorite!
Why?
@@imrankhawaja410 I asked myself the same question... I bought for increased concealability and was expecting some tradeoffs.... I was expecting it to be snappy and it wasn't. At all! I was also expecting to be weirded-out with the three finger grip. Also, not an issue. Plus it is smooth and accurate. Just really surprised by its performance and not having any of the undesirable attributes I thought it would.
Ken Yoshida just ordered mine last week. Picking it up tomorrow so I just was curious and excited. Can’t wait!
@@imrankhawaja410 Grats! I am sure you'll enjoy it.
Moon Spoon Goon I love it. It’s my favorite sub-compact gun and it shoots like a compact gun.
Its ok that you don't love it. Not every gun is gonna be awesome for every person. You mentioned you have medium size hands in the video and that might be a reason why this gun is not working for you. I have large hands and I prefer the P10-S especially over the Sig 365. I wont even consider buying a 365 for this reason. I realize the P365 is a great gun but the small grip is a deal breaker for me. That being said, I really like the Glock 43x/G48 too. The grip on the G43x is bigger than 365 so it allows me to get a good grip. With the addition of the Shield Arms 15rd mag its a no brainer as a carry gun for me. I do agree the build quality feels better on the CZ P-10S over the G43x but I prefer the G43x for carry because its thinner and lighter.
I agree. Also, I had the same problem with the 365 even though I have medium-size hands. So what I did was installed the XL grip module on the regular 365 and now it works perfect for me. Also my 48 with the S -15 mag is awesome. Thank you for watching and for your kind words.
YES! You're off Your Rocker. I wish when people would do their review to just stick to the gun review and their operations without INTERJECTING their subjective Opinions. IE...opinions about sights, and types, three dot sights vs darkened rear sights, and grips, etc because what you may not like, others may like or love about it. So hence, stick to the guns operational functions. Run the test also with different types of ammos and grains such 115 grains FMJ, 124, and 147 grains regular ammo or with +P hollow points, etc. Those would be tremendously helpful. And, if the higher grains would cause a malfunctions like other have said then you've personally verified that issue and your viewer will appreciate that. Enough said! 💯💯👍👍
Thank you very much for your feedback and I look forward to watching your reviews. Happy new year.
Wonderful review. I’m still hyped about the CZ. I have 6 Sig’s and want to try something different. I have 5 CZ’s but this would be my first pistol. I’ll track down you other P-10 Reviews.
Thank you again for a great video!
Subscribed!
Thank you very much for your kind words and for the sub. I really appreciate it!
Great review as usual. I have pretty large hands so I would probably need the large base plate so I might as well stick with my P10C which is not that much different in size. You just saved me some money! By the way, here is a company that makes a mag sleeve adapter...it's called the Null from Variant innovation. It allows you to use the 15 or 17 rounds mags in this pistol.
Very good information. Thank you very much for sharing it with us and for taking the time to stop by!
I run a p10c for USPSA matches and I've really fallen in love with it...I'm really thinking about an s for concealed carry. Thanks for the video.
I agree, the F is awesome.
I like the P 10 C very much! And for a competition I would try the F. Thank you for watching!
I think the size and profile of this gun is perfect. It's practically the same size as my PPQ SC. I have medium hands an I prefer guns that are a little thicker. Haven't decided on which optic to run yet though.
Fantastic. Thank you for watching. I appreciate it.
I’m a little late here, I see comments that were posted a year + ago. I’ve had my P-10 S for a little over a year now and have to say that I love this pistol. It feels good in my hands but I like the fatter grips. I have the fatter back strap installed on it. I shoot very well with it and have had no issues with feeding. I have shot steel casing and brass casing both with no issue. I’ve even recently shot some of the new Sergeant Major zinc plated casing through it and no issues at all. It shot very well actually. Its my EDC for the most part. I do swap out with one of my revolvers some but it goes with me most of the time. I added HYVE 3 round extensions to my mags to not only increase number of rounds but add some grip at the bottom of the mag well. I like to have 3 fingers on the grip for stability. But yeah, this is a fantastic pistol and I have no complaints at all. There’s nothing more you could ask from a semi auto in my opinion. I hate your experience was less than that. I don’t recall hearing or reading any negative comments or reviews on the P-10 S. Not that yours was really all that negative. I appreciate your honest opinion and detailed review. Thank you for that. I wonder if since posting this video you have had a change of heart about the P-10 S?
You know, it’s been on my mind to give it a second chance. But, I’ve been reluctant to spend the money again. My EDC at this time and has been for a while is my HK VP9SK. Which I love and shoot very well. From time to time I will pick up a revolver or my custom Glock 48. Who knows, maybe I’ll give the P-10s another shot. Thank you very much for watching and for taking the time to comment. I really appreciate it!
Hey no problem, you can tell when somebody puts genuine thought into the videos they post as opposed to the people that post a video and haven’t really taken the time to put together complete sentences let alone a several minute video. I start watching a lot but finish few. It was a good video. As far as the pistol, I get it. I wouldn’t want to spend the cash again if I don’t have a good feeling about the firearm. I own many from AR’s to Shotguns, revolvers, semi auto’s, target competition pistols, short, medium, and long range rifles ( love shooting for distance and accuracy), to some that j just bought because they were different. But they all have one thing in common, they fit me and I’m comfortable with them. It’s a curse maybe. I buy but seldom do I sell. Thanks for the video man, have a good one and never stop shooting. Oh and.......Let’s go Brandon!!
@@204Heavy I think I have the same curse! Let’s go Brandon!
MDpolo Gun Channel one more then I’m gonna stop buggin you. You love your VP9SK, have you tried the Canik TP9 series. I have two, the TP9SF and the TP9SFX. Absolutely love these firearms. Great prices on them and they shoot fantastic. I don’t have the sub compact model yet so I don’t use it for EDC but I’m workin on gettin one. Then I’ll rotate it and the P-10 S probably. No malfunctions and I’ve run all kinds of ammo through them. Check them out if you haven’t. Very nice handguns. Later.
You’re not bugging me man. I appreciate the interaction and your feedback. I have not tried any of the Canik line but I will take a look at them.
P10s my carry. Love it.
I have the P-10F and I love it. I had the first gen P-10C and I hated it because the magazine release sometimes would work, it didn't matter which side I used the magazine release. I got rid of it.
I have not tried the P10F but I hear great things and I have a P10C (1st gen) with no issues, but I have heard from many people about the mag release issues that you mention. Thanks for watching.
Have the P10c gen 2. They removed the full ambi mag release and just made it reversible if the shooter wants to switch it. Love it. The best slide release ive used on a pistol. It is practically spring loaded and has no problems.
@@Southron-CiK 👍
Like it much, much better than a Glock 26, 43, or even 19. Only firearm in the size category that rivals it (in my opinion) is the H&K VP9 SK or the P30 SK
Great video. Do you think there’s a quality difference between the USA model and the Czech Republic model? Please opine.
I have not seen any difference.
Anytime a sight is added to to slide, the character of the shot, recoil and return to target are changed. Added mass changes the dynamic..some more than others.
Yes, but you would think that when a pistol comes ready for a red dot from the factory, the manufacturer took all that into consideration. At least they should have. Thank you very much for stopping by.
Size is always a trade off. I love the size of the p365 but when push comes to shove I can draw a little larger gun like the p10c s much better. Carrying a micro size gun doesn’t do squat if you can’t employ it.
I agree with you. That’s why I didn’t start carrying my P365 until I installed the XL frame module. And it is the same reason why I feel more comfortable with the Glock 48 and the S 15 mag is a plus.
I own a few CZ and he neglected to mention that the P10s accepts magazines not only from the 10C, but the 10F, the P-09 and 07. So you can manage 21+1 if you're running the +2base P09 mags. Mine came +2 on purchase but that may not be standard.
Actually it does not take every magazine. Lol. CZ came out with new magazines with two slots in them versus one so if you try to use old ones they wont eject with mag release button and you will get a double feed and be forced to yank the mag out by hand.
LOL. He even mentions it in the video that this particular gun has the new magazines!!! 🤣🤣🤣
Man you are quite the dolt eh??
@@WheresWaldo05okay and🤨? You little dick twat save your insults for someone else, I know how my firearms work. Now if you had read instead of being so ready to talk, like a woman, logic would've shown u my initial statement was correct. Never said "EVERY" first off, secondly all the new magazines are made to be universal why would I mention old ones that aren't being manufactured for these models anymore? 10s owners know this and I labeled the specific models that were compatible. If you got a magazine stuck means didn't do your homework in the first place, so who's really the dolt? Better people think you're an imbecile than speak and confirm it true, you rogue scholar you🙄 foh
For information CZ sells fillers that will make the c mag fit in s frame and f mag fit in c frame now
Thank you very much for the information and for taking the time to watch. I appreciate it.
What kind of light( Streamlight) can you put on a 1 pic rail??? Never put a light on my gun…. This may be the first?
Thanks for the review.👍🇺🇸
You are very welcome. Thank you for watching.
The O-Light PL Mini 2 fits well on the P10s
I got my P10S, not optic ready, for $399.99, but i live in a low capacity magazine state, so its not all wins. Amazing pistol tho. Mine is also from the Czech Republic, and the ones i have seen from Kansas City, KS have had some imperfections on the polymer lowers.
Everybody's different. I choose the CZ because I'm used to it. I'm sure Glock fans and Sig fans have their reasons.
Yes, you are correct. There is a pistol out there for everyone and that’s what makes the error that we’re living in so amazing. I love the P 10 C and although I don’t own it, I think the P 10 F is fantastic. I just didn’t get along with their little brother. Thank you very much for watching.
Bought the P-10S OR over a month ago and the trigger while is not the best out of the box, it’s much lighter / better than the trigger on my P-10c.
Could not resist the low prices ($350) on this gun and decided to give it a try. Well, I really enjoyed the P-10S’ ergonomics, low recoil and shot extremely accurate. Thinking on keeping this gun and possibly sell the Compact.
Thanks for the video.
You are very welcome. I’ve been thinking about revisiting this gun. Thank you for stopping by.
Where did you find this for $350?
@@garrisonturner3232 On line, bought on May 2023 from Dahlonega Armory
Keep both.
Great gun - got one without the RMR last summer and sent it off to Primary Machine and had them mill the slide with a Holosun optic. Couldn’t find the optic ready version.
It’s amazing how difficult it has been to find the optic ready versions. Even before all this craziness started. Thank you very much for watching.
Nice review. A very awesome EDC option. Not every gun is for everybody. I prefer the longer slide.
Thank you for your kind words and for watching. That’s the beauty of the time we live in. You can pretty much find a gun to fit anyone.
I am selling off other guns, to get more CZ's
I'm doing the same thing 🤣
I've got a CZP10S coming and i wonder if a StremlightTLR'-7 flashlight that's on my CZP10C fit on the CZP10 S?
I don’t know. I haven’t tried that yet. Please let me know if it does. Thank you very much for watching.
Thanks. I really enjoy your no nonsense, honest reviews/opionins. I had to chuckle when you mentioned you hate the gap between the optic and the slide. I had CZC mill my P01 steel frame slide and install their adapter plate for an SRO. I also have a gap and honestly hate it as well. Purely an aesthetic thing, but still, I can't not see it 🤣🤷🏻♂️
I totally get it! Bugs the hell out of me. Thank you very much for your kind words and for watching. I appreciate it!
The new plates have no gap, in USA chpw sells plates as well
I'm going to install a Holosun 508T on mine. Sorry if I missed it but can you co-witness with those stock sights? If so, where did you get your adapter plate please?
+very dark passenger I talk about the red dot around the 05:00 min mark. The plate came from CZ Custom. The sights that came with the pistol, do not co-witness with the 407C using this particular mounting plate. It is close, but just not tall enough.
@@MDpolo Thank you for the information. I was able to locate an adapter plate/raised sights combo package for a reasonable price, however they are backordered. I guess I'll just have to go without for a while.
After 3yrs has your mind changed? I just bought one, waiting on the transfer. I shot a buddy's and instantly fell in love... maybe things like a pinky extension, grips and trigger "upgrade" make all the difference but from what I've seen the concensus is that it's pretty much best in class... especially for the price. Also, I noticed ppl saying QVO makes a good optics plate... hopefully they have one in stock 🤞Thanx for the review! 😎
My pain has changed. I made a follow up video on it. I don’t think you’ll be disappointed at all. Thank you for your kind words and for taking the time to stop by.
The proper plate which will fill in that horrible gap is sold on MidwayUSA, and as of the time of me writing this is in stock. This is where I got mine and confirm that it does indeed fill in the gap. Same plate as CZ P10 C.
Good to know. Thank you very much for watching and for taking the time to write this note.
I run the p 10 F with an SRO in competition so I love my S with an RMR for carry although I will be having my p365 milled for the mini RMR or holosun.
I really like the P10F. Thanks for watching!
Very thorough. I have a P10C made in Kansas, and a P10S made in the Czech Republic. There is definitely a quality difference between the two. The mill marks that were present on the C were not there on the S. I also have a P09 and Shadow 2 from the Czech Republic. They are flawless. Superficial, I know, but there is definitely an observable difference.
I appreciate your comment. Thank you very much for stopping by.
Got a link for buying the extended longer magazine? The +13 one that fits nice and flush? I cant find it online. I dont like the smaller one with pinky hanging off. Or using an extra long mag that looks wonky and doesnt fit aesthetics of the gun grip.
I guess he does not have a link 😔
I have the P-10S in OD green. Drives nails at the range. No functional issues with mine. My only minor complaint is I don't care for the stippling on the front and back of the grip, the edges are fairly sharp but that's easy to fix with a talon grip. And I don't like that the back strap has a roll pin (with little teeth on it) through it. Took some finagling to get it out and back in without damaging anything. It's more tedious to change than need be in my opinion.
I saw a P -10S in OD green the other day at the gun shop. First time I see one in person. It looks pretty cool! The pins on my P 10 F were an absolute nightmare to remove and then install again. To the point that I never want to touch them again. Thank you very much for watching!
I am debating between the P10c or P10s to go into my EDC rotation
If you have access to a range that has both in their rental counter, I highly recommend shooting them before making a decision. They shoot totally different. At least for me. Thank you for watching.
Beautiful gun, was going to buy one and ended up buying a Taurus g3, and a g3c, two boxes of ammo for the price of it, happy with both guns no problems, will save money for this one next time great gun. Good Video 👍
Thank you very much and congratulations on your purchases.
P10s vs baretta apx compact? Which would you prefer?
My choice would be the Beretta APX Compact. No question.
@@MDpolo thanks for asking this question Javed, and thanks for answering MDpolo. As an owner of an APX Centurion, waiting on the grip for the Compact to arrive, and also considering picking up the CZ P-10S, this is great to know!
Glad to help! Thank you for watching.
Great review... I can't wait to buy one... either a p10 or p07.. or both... be safe man
It really depends on whether you prefer a striker fired or a hammer fired pistol. I also agree with +Heath En Ovthanorth and my P07 has to go to Cajun Gun Works but now it is awesome and will never sell it. The P10c is fine out of the box. Striker fired or hammer fired, that is your decision.
I didn't like the P07 trigger, but like you guys, I love it after CGW!
I have the P10c OR, after carrying it for a few days, realized I want a slightly smaller gun for 8-10 hour carry days, I believe the P10s might be that gun?
It’s all personal preference. The P 10 S is not that much smaller than a P 10 C. Of course the main difference is the length of the grip and it will be a little lighter because you’re only carrying 12 rounds.
The problem is the Shield Arms mags are crap. I tried a total of 6 of them in my 43X and had issues with all of them.
I’ve heard some people having issues with the first generation of mags from Shield Arms. Most people that I know and own them have nothing but good things to say about them. I have three of them and all have been 100% reliable. I actually have two gen 2 mags on order to test them. Thank you very much for watching!
when you compared the guns with mags in to show if there was any rattle when you shook them you used a Shield Arms mag in the Glock. I have a Glock 43X that does the same thing with the Shield Arms mags but almost nothing with the OEM mags. I went back to using only the OEM Glock mags for continuous failure to feed/feed ramp jams with the SA S-15 mags, but they did rattle a little as you demonstrate. Probably a petty point but...
To be fair, I have several Glocks that rattle with OEM mags as well. My S-15 mags have been 100% reliable. Thank you very much for watching.
I'm getting either cz p10 c or rex delta gen 1 in the next couple of days do you have a preference
That’s a good question, but I cannot speak to it because I have never handled a n Arex Delta pistol. I’ve been looking for one, but no luck so far. So regrettably I cannot give you an opinion there. Thank you very much for watching.
yeah you're completely off your rocker. i know it's all about personal preference BUT the CZP10S beats the 48 and the 43X in every category BUT capacity. it's a shame really because with more rounds it should be the preferred pistol. i have the 19/43 and the 43X. have owned the P10C and the Glock 26 so i include all of those. i have YET to own or fire the P365 so i cant intelligently include that pistol.
Oh Jesus. If Mr. Rogers gave a gun review It would be like this.
Yes, I heard that one before. Thank you for watching!
Good video! Where did you find the XL grip module?
Thank you very much. I purchased the grip module from Osage County Guns and then had it stippled by Rocket City Stippling in Alabama. Thank you for watching!
Yeah that gap sucks. What's really bad is that you would be way better off buying a Czech Republic made P10 (they are better fit and finish) but would be non optic and then simply have the slide milled for your optics. That's what serious people do with the P10-C. The Kansas City made P10's do not have a cold hammer forged barrel like the Czech made ones.
So you're saying that it doesn't shoot like a full size gun? Who would have thought. I have a 365 XL and I have never liked the way it shoots. I honestly prefer the lowly Taurus G2 to the 365
I have never shot a Taurus but I am trying to get my hands on a G3C.
There are better guns for comfortable carry and there are better guns for fighting but the P10S is the best do it all gun on the market. It's big enough to fight with and small enough to carry. It's basically the Glock that Glock should have made that is between the 19 and 26 in size
Amazing comparisons keep it up happy subscriber here thx
Thank you very much I really appreciate that!
Great video !! It was on my list to try , but are few and far between. I shot the P365 poorly . Due to size , I have big hands , the 365XL would probably suffice. My best shooter is the HKVP9SK and believe it or not a gun half the price of the HK ,..... a Canik TP9SC !! 🇺🇸😃
I have medium size hands and for me the regular P365 was too small. However I installed the XL grip module on it and now I love it. I love shooting the HKVP9SK, however it is a bit chunky for my taste to carry versus capacity. Thank you very much for watching!
Nice review but I don’t see how that extended mag for the Glock can hold 5 more rounds with only adding 1/4” more length to the grip! While the CZ only adds 2 rounds ?
I love my CZ10c ……shoots amazing , trigger is awesome , ergonomic are great etc …..I probably love mine even more cause I got a screaming deal on it while I was at a gun shows a number of years ago…..$300 out the door brand new! It’s in my top 5 favorite pistols!
$300 out the door there’s a screaming deal. I just never got comfortable with it. Thank you for stopping by.
I have a czp10f rmr /tlr-7 . Egw rmr plate works well . There is deuck defense RD plate.
Sounds like a nice set up. I’m very interested In checking out a P 10 F. Thank you for watching!
Ragnarok holster works Glock 9/40 light compatible
I'd say if the g43x puts a rail then it might beat the p10s but idk. p10s is just so pretty compared to the glock and you'd still have to upgrade the glock sights and mill it for a reddot. Sure its thinner but guys don't give a crap about that. or do they?
Just to be very clear.. in EU the P365 costs almost as much as 3 CZ P10 S would.. Idk why tbh. Are Sig's just that expensive over all.. and if so. WHY the F are they with all the lawsuits and whatever and QC problems they had. Makes no sense.
Been on my short list for a long time. However, you are the second person I follow that is not in love with the CZ p10s. I waited so long to find one, I'm over it. I bought the FN 509c. It's the best compact I've shot. Points really well, super accurate and great ergonomics.
do they make any good AIWB holsters for the p10s with rmr and falshlight compatibility?
I don’t know about the flashlight compatibility. But give them a call.
ANR holsters makes one for the RMR and light
Just because one individual, with no particular expertise in firearms, didn't like the CZ P10 model, that does not make it a "bad" pistol for everyone else.
I can attest to the fact that my two CZ P10 F and C are proven RELIABLE, VERY ACCURATE and with a SMOOTH TRIGGER PULL second to none!
I have nothing but praises about my CZ pistols. Hence, your OWN PERSONAL OPINION about the CZ is meaningless to me, because I know better. I have two superb, outstanding modern combat handguns. CZ is renowned WORLDWIDE.
I have nothing against Glock, they are great handguns. But I prefer my CZs.
You said it correctly at the end. You prefer the pistols that you like. I prefer the pistols that I like. It’s all personal preference. Yes, this is my channel and my personal opinion. I’ve said it many times that this is a very good pistol but I just wasn’t for me. In return your resort to personal attacks. God bless you and have a great life.
@@MDpolo indeed, here in your channel you "reign," but can you share your credentials and expertise on firearms?... Thanks.
Your feelings got hurt because you prefer agreement and approval to your own personal views and opinions. I expressed my opinion just as much as you are entitled to. Relax. Enjoy your Glocks.
I would to Know p10C and P10s it same or Der.
Looks exactly like the Canik TP9 Elite SC without the dual slide lock. I shoot this one better than the P10C.
Any pinching issues with either of the mag options? I know the flush mag pinches like a SOB.
I never had any pinching issues with it. Thank you very much for watching!
@@MDpolo Shot mine for the first time today. I did have it pinching my pinky a little bit. I found it strange. Did you notice that the slide didn't remain open sometimes after you completed shooting?
I did experience the slide not locking back on me a couple of times but that was me riding the slide lock/slide release lever. As far as the pinching that you mention, I did not experience that although I have heard of many people complaining about it.
Can you do a comparison between the S and the C?
Regrettably no. I sold the P-10S. Thank you for watching.
I can’t find the p10c anywhere and my local store only has this in stock. I will have it for EDC and some days duty. Idk if I should wait or not
If you are in a real hurry, you can purchase this pistol and if it is too small, install the +2 mag extension. It will give you almost the same capacity and grip length of the P 10 C. Thank you for watching.
MDpolo Gun Channel I might have to. Your video made me want it!
So I haven’t seen anything wrong in this vid but the mag is a 10+1 round mag and with the +2 it is becomes 12+1
Correct.
@@MDpolo i just wasnt sure if you knew that, there were a few times throughout the vid that you said the 10 came with a 12 rnd mag and at one point mentioned the +2 made it 14. Probably just tongue twisted between talking about the 2 different pieces.
My apologies. I miss spoke. Thank you very much for watching.
Did I miss it, what brand is the mag extension? I'd like to try one with my p10S
CZ P10c +2
You can get +2 extensions from Hyve Technologies as well - colors too
Is there any good comparison video for p07 vs p10s?
I haven’t looked into that. Thank you very much for watching!
I’m also in Indiana and would like to put it in my hand before buying it. Can’t find an S or C so I’ll have to wait until the crazy market slows down.
Pinnacle Firearms in Carmel Indiana has two P10s and one P10c Tactical in the cabinet. At least they did as of yesterday afternoon. Thank you for watching!
Nice video, been on the fence and looking for a new carry. I've been looking at the G43x
Thank you very much. I would not discount this pistol because of my experience. I would recommend that you find a gun range that has one for rent and try it out next to the 43X.
@@MDpolo yeah my brother has a 43x and a 48 I've yet to fire the 43x would be tough to find a local range with a cz p10s think my range might have a full size though.
I see u have rhe holoson 407c or 507c... I'm wanting to get the 507k for my p10s.. will it fit ? I'm new to pistol optics and if so what kind of plate will I need and rmr plate? Thanks for your help
I have the 407c on this pistol. I didn’t care for the extra features and cost of the 507c. I don’t know if the 507K will fit this pistol, but for the 407C or 507C you can order the plate made for the RMR. It is the same footprint. Thank you for watching.
Look at the second post here for pics www.glocktalk.com/threads/c-h-precision-weapons-507k-adapter-plate.1876352/
You'll need this plate chpws.com/product/cz_507k
That’s a nice plate. Thanks for the info.