It's appsolutely highway robbery what CZ charges for these plates. They should be included instead of searching for the right one that is always out of stock. Brewman
Wish the gun came with a plate of your choosing. Other then that I’m happy you guys made a optic ready version!! Will you guys make other models like the P-07, 09, 01 optic ready also?
Removed the cover plate and two scews from the CZ P10C. Cleaned/degreased the plate surface and scew holes on slide. To install the C&H adapter plate, which of the screws (4-40×.345 or M3x6mm) that came with the C&H adapter plate should be used to secure the plate to the CZ slide? Tried reusing the two screws from the cover plate but the heads don't recess below the adapter plate top surface (or should I keep turning to recess the heads)...C&H instructions has no reference to clarify. - Greg
Bought mine a few days ago and it was on sale plus the $50 rebate. P10c optic ready and xs night sights for $425 plus $50 rebate so it’s $375 besides shipping and transfer fee.
I ended up buying a optic cut slide from cz, also I read somewhere that there are a few optics that will sit right on the slide, does anyone know if that's possible or do you have to have a plate.
Just installed mine. For the Trijicon RMR there is a huge gap in front of optic when installed. Can't believe CZ would allow such a design flaw. I'm guessing the king slayer or Holosun optic need this gap, if that's the case just make a separate plate solely for the RMR. I am waiting for the QVO tactical RMR CZ plate to become available as its a perfect fit for trijicon optics on the P10C and will be changing it out.
Im new to CZ P10 C and could use some assistance. To be specific, need help with SKU 91588 optics ready with RMR and cowitness sites. Comes with a blank mounting optics plate. What optics will fit this plate thats included?
There no way around rising the optic when using an adaptor plate. Your only alternative is to have your slide milled for that specific optic you're using. Note: Milling is not reversable.
I enjoy your reviews very much. Question! I want to make my P10F (not OR) a little more competitive changing sights, maybe a fiber optics front and a serrated regulated back sight. Do you have any insights about brand, type, convenience? Thank you!
I have a P10 SC which is not optics ready. I want to mount a holosun HS507C optical sight on it. Can this slide be machined to accommodate this sight. Do you have some recommendations / comments for this ?
Mine too! frikkin impossible to remove. I even tried to heat the cover with a mini-propane torch, but no dice. Did you succeed getting your cover off somehow? It would be interesting to hear what the trick is.
hate this new plate system many manufacturers have. glocks included. more screws and crap to fail. layers of potential loosening. potential reason we hear of these flying off guns.
Nothing new about the plate system at all. Also if your screws fail and your red dot goes flying off, it is because of user error, and it's not the plate systems fault. Just install them correctly and you won't have problems it's real simple.
@@LeadSlinger_ Seriously... These people are clueless, I've got like 9 pistol red dots and for YEARS all of them have stayed zero and continued functioning without issue. Plates are a necessity, due to the different footprints. Most of these people probably don't own any guns with optics on them, or any at all.
I did 500 rounds with that model today. I will be changing only 5 things. No 1: Checkering on the back are 1, 2 or 3 lines to short. Current configuration digging into hand palm in that specific spot (When checkering meeting with the smooth area/ biver tail area). No big deal but we have room for improvement. No 2: Trigger. Instead of old school banana trigger I would like to have more consistent flat trigger. No 3: Trigger. When you are pressing and you hit the wall (of the trigger) "apex" of the trigger is round. Trigger could be "crisper". No 4: Trigger. I don't think 2 stage into 1 stage trigger is necessary. I would prefer if you spend that money on the improvement of the flat trigger. No 5: Grip: Color. I'm not a fan of the baby blue. I would prefer black grips. During this 500 rounds once magazine didn't catch the slide. Other then that I'm happy with that tool. ...I really want to see new Optic Ready model with flat single stage trigger in the near future.
Why don't you include one free plate like Walther or do something other than just sell the gun without anything
Be nice to have information related to different companies screw size and what proper screw thread pitch and length to use..
It's appsolutely highway robbery what CZ charges for these plates. They should be included instead of searching for the right one that is always out of stock. Brewman
Did you ever find one? Running into the same issue currently. I'm a little late to the game it seems like..
how about adding plates in the box instead of an a la carte? cause your website has it out of stock…always.
Everything should be made optic ready now…
Wish the gun came with a plate of your choosing. Other then that I’m happy you guys made a optic ready version!! Will you guys make other models like the P-07, 09, 01 optic ready also?
Yea at tye price point uts kinda ridiculous
Removed the cover plate and two scews from the CZ P10C. Cleaned/degreased the plate surface and scew holes on slide. To install the C&H adapter plate, which of the screws (4-40×.345 or M3x6mm) that came with the C&H adapter plate should be used to secure the plate to the CZ slide? Tried reusing the two screws from the cover plate but the heads don't recess below the adapter plate top surface (or should I keep turning to recess the heads)...C&H instructions has no reference to clarify. - Greg
Good luck finding an optic ready CZ model for sale anywhere.
I picked mine up in OD green yesterday.
Bought mine a few days ago and it was on sale plus the $50 rebate. P10c optic ready and xs night sights for $425 plus $50 rebate so it’s $375 besides shipping and transfer fee.
@@FishFind3000 What's the name of the plate that fit the P10 c? where can we find it ?
I picked mine up in Encks Gun Barn last week,but install holosun 407 c ,driving me crazy,screws doesn’t fit,.
I ended up buying a optic cut slide from cz, also I read somewhere that there are a few optics that will sit right on the slide, does anyone know if that's possible or do you have to have a plate.
Could not get the RMR plate so did not get a CZ, went a different route.
No kidding those things are unobtainium.
@@Xerauxdid you ever find one?
Where is the PO-7 OR option!?
So I need a plate for the optic and that is bought seperately? Good to know.
Also, are the mounting plates for the S2 same as the S2 Compact?
what plate do i need for a cz p10f for a holosun 508T?
Where can we buy the optics plate?
Just installed mine. For the Trijicon RMR there is a huge gap in front of optic when installed. Can't believe CZ would allow such a design flaw. I'm guessing the king slayer or Holosun optic need this gap, if that's the case just make a separate plate solely for the RMR. I am waiting for the QVO tactical RMR CZ plate to become available as its a perfect fit for trijicon optics on the P10C and will be changing it out.
What's the name of the plate that fit the P10 c? where can we find it ?
Im new to CZ P10 C and could use some assistance. To be specific, need help with SKU 91588 optics ready with RMR and cowitness sites. Comes with a blank mounting optics plate. What optics will fit this plate thats included?
What plate are you using in this video?
Hey is there a new CZ P01 optics ready version coming out?
When is that Bren BR in .308 coming out? You know it'll sell like hotcakes, right? 😁🥺
What’s it cut for from the factory? I do t want any adapter plates raising up my optic.
It's not cut for anything. You have to have a plate
There no way around rising the optic when using an adaptor plate. Your only alternative is to have your slide milled for that specific optic you're using. Note: Milling is not reversable.
Which plate shld i buy for 75 SP-01 when installing a holisun 507k optics?
But where do you purchase the plate...cz USA don't sell optic plates
C&H Percision is the best for adapter plates.
How do I go about getting a Holosun 507C X2 to mount to my hopefully soon to be CZ P-10C OR?
Get rmr plate
I enjoy your reviews very much. Question! I want to make my P10F (not OR) a little more competitive changing sights, maybe a fiber optics front and a serrated regulated back sight. Do you have any insights about brand, type, convenience? Thank you!
Do you guys make one for the Vortex Defender CCW red dot? Thank you.
Vortex defender uses the Leopold delta point pro plates if I remember correctly
I like to know the Year that cz p10c optics manufacture date
I have a P10 SC which is not optics ready. I want to mount a holosun HS507C optical sight on it. Can this slide be machined to accommodate this sight. Do you have some recommendations / comments for this ?
Yes, there are several companies that will mill your slide for whichever optic you want, it is usually around $200.
CZ USA - We need plates for Shadow 2 OR ! HELP PLEASE !
Order one. Took less than a week to get mine straight from the Czechs themselves.
Ensinem como fazer a troca do cover plate da CZ p10 a tampa traseira do ferrolho !
"optic ready"
Apperently one of mine had loctite....only half the screw came out 🤬
My cover plate do not want to come off... Is it glued to the slide?!
Mine too! frikkin impossible to remove. I even tried to heat the cover with a mini-propane torch, but no dice. Did you succeed getting your cover off somehow? It would be interesting to hear what the trick is.
Any tips on this?
I eventually made it come off. I had a really thin metal profile, with it was able to pry it open.
Yikes.
hate this new plate system many manufacturers have. glocks included. more screws and crap to fail. layers of potential loosening. potential reason we hear of these flying off guns.
Nothing new about the plate system at all. Also if your screws fail and your red dot goes flying off, it is because of user error, and it's not the plate systems fault. Just install them correctly and you won't have problems it's real simple.
@@LeadSlinger_ Seriously... These people are clueless, I've got like 9 pistol red dots and for YEARS all of them have stayed zero and continued functioning without issue. Plates are a necessity, due to the different footprints. Most of these people probably don't own any guns with optics on them, or any at all.
I did 500 rounds with that model today. I will be changing only 5 things.
No 1: Checkering on the back are 1, 2 or 3 lines to short. Current configuration digging into hand palm in that specific spot (When checkering meeting with the smooth area/ biver tail area). No big deal but we have room for improvement.
No 2: Trigger. Instead of old school banana trigger I would like to have more consistent flat trigger.
No 3: Trigger. When you are pressing and you hit the wall (of the trigger) "apex" of the trigger is round. Trigger could be "crisper".
No 4: Trigger. I don't think 2 stage into 1 stage trigger is necessary. I would prefer if you spend that money on the improvement of the flat trigger.
No 5: Grip: Color. I'm not a fan of the baby blue. I would prefer black grips.
During this 500 rounds once magazine didn't catch the slide. Other then that I'm happy with that tool.
...I really want to see new Optic Ready model with flat single stage trigger in the near future.
Everyone likes the blue except you, so you can change yours =p
Jou poes
cover screws were on way to tight, I shouldn't have to go to a gunsmith for something that stupid...
Why don't you include one free plate like Walther or do something other than just sell the gun without anything