Money Saving DIY Exhaust Repair
Вставка
- Опубліковано 9 сер 2022
- Watch full video: • MONEY SAVING DIY EXHAU...
MY ONLINE COURSES:
► My Cabin Building Course: bit.ly/36bRARX
► MIG Welding for the Home Workshop: bit.ly/3CGuUFv
► Woodworking for Beginners: bit.ly/3w6ZnLW
► How to Build a Deck: bit.ly/3i2LWV3
► Build Traditional Wood Cabinets: bit.ly/3JbLQ9v
► Renewable Energy for Your Home: bit.ly/3w9K4ls
► 3 Solar Energy Projects: bit.ly/3KLNUp9
READ MY POPULAR ARTICLES ABOUT:
► Polyurethane Finish - bit.ly/powerbuffing
► DIY Hoop House Plans - bit.ly/hoophouseplans
► Submersible Pump Installation - bit.ly/pumpinstallation
► Air-Drying Wood Tips - bit.ly/wooddrying
► How to Build a Table - bit.ly/tablebuilding
► How to Stain a Deck - bit.ly/deckstain
► Choosing Waterproof Outdoor Glue - bit.ly/exterioradhesives
► How To Build A Wheelchair Ramp - bit.ly/wheelchairrampplans
SUBSCRIBE: bit.ly/BLRchannel
WATCH MORE BAILEY LINE ROAD:
► Winter Tips - bit.ly/2rpnUcm
► Product Tours - bit.ly/2L2H54Q
► Woodworking - bit.ly/2RN83jC
► Real Rural Life - bit.ly/2RI5dvY
CHECK OUT MY WEBSITE: baileylineroad.com/
How-To & DIY eBooks: baileylineroad.com/shop/
SOCIAL MEDIA:
► bit.ly/STEVEMyoutube
► bit.ly/STEVEMfacebook
► bit.ly/STEVEMtwitter
► bit.ly/STEVEMinstagram
► bit.ly/STEVEMpinterest - Навчання та стиль
Good idea but if I have a welder I'd just weld it and never have to wry bout it again.
I know wth 🤦♂️
Yep exactly what I was thinking 🤔
Some people 🙄
Or Until it rots off, hopefully by then you won't own it anymore !
71 idiots and counting 🤦🏽♀️😂🤣😂 the guy is just f'in with everybody
Same I was like that’s kind of a mess lol
You already have a MIG welder..... Just weld on a new flange or pipe. I use exhaust clamps to position the pipe where I want it, tack it in, remove clamps, and weld the rest.
The straigt lines might be much easier to be welded, I guess,
When I first saw this I was like oh ok this must be cool tip for anyone that doesn't have welder. Then you see him welding. 😂
😂😂 ...
This is some bullshit.
Ahaha
European
😂😂😂😂
Just get my portable mig welder out…real relatable.
Always keep one in my back pocket
They are like 200 dollars. You can work for 1.5 days making min wage and afford it. Don’t be a bum lol
You can buy a welder or you can pay someone to weld it for you without stupid clamps and silicone
Please God, no.
“Easiest way to find an exhaust leak is with your fingers” thank you sir
Second degree burns incoming 😂😂
Obviously do it quickly while the car is cold lol
@@LightsaberGoBrrrrrr Woops, too late. Just paid a few thousands for the the burn treatment
😂😂😂
Welder, half a tube of hi-temp rtv, a pipe you cut in half, and two U clamps. . . .
Just cut a segment of thin wall pipe twice the length of the gap and U bolt clamp it.
There, saved you $500 and 2 hours of wasted time.
You need to open your own shop Mr Knowitall.
@@drygulched8084 That's Miss Knowitall to you. And I'm just pointing out the obvious because over-complicated "repairs" like this are garbage
Lol , we actually used to fix our's back in the day this same way but with Campbell's soup cans. And your right, this works. Might not be 100 percent leak proof but it gets the job done
@@sivalleypool lol
Poop ok lol lol lol o
Was wondering why he didn't just get a slip on and then weld it over....... $5 for a slip on connector at AutoZone and he already has a welder could have saved himself the tube of RTV, looked 100x better and laster 1000x longer. But that's just me...
Great! That should hold until you get to the damn muffler shop.
better than elmers and cardboard
Used to do the same thing with an old soda or beer can just cut the ends off with tin snips and cut it long ways down the can and wrap it around the leaking area and use a couple of hose clamps Done
U had me till u pulled out the welder🥴
Saves you thousands but you’ll have to spend hundreds on a welder😂
You should do that anyway.
this is so stupid 😂😂
A welder at harbor freight is like $80
A good mig welder on amazon is $230
Gas is cheap to lease
0.030 is like $15 a roll
(i did floor pans with it just fine)
Im mexican, we’re ghetto AF and i would never do that! A welding shop would probably charge you 75$ to weld a new flange on there. Way cheaper than buying a welder
Or just use a flange band clamp! Been using them for over 40 years!
They aren't always fool proof especially if gasket is bad. We have these at work and they will leak no matter how tight you get them off the gasket need replacing
Pedro can do it better for a 24 pack of brewskis🤣🤣🤣
God damn that's the most ghetto shit I've ever seen. You can weld obviously, weld the damn thing! Silicone belongs no where near an exhaust.
Only for gaskets.
Thank you
I mean technically, the sealer was close to the ends where it would form a gasket soooo
@@VQ_menace90technically you wrong as shit.
@@TrojanLube69I was gonna say that. My y pipe that hooks to my manifold needs a little bit of copper silicone or that sucker will leak like crazy
What a mess never do this
Got to be kidding, right?
When I did mine, I just disconnected the flange, loosened the exhaust pipe from the vehicle in the section I was working on, added high temp silicone muffler sealer to the inner race, and torqued everything back down. I haven't had any issues for about four years now and counting... And I did the job in about 45mins w/o permanently damaging my exhaust system.
So….. you have a welder but used silicone ?? Dude ??? Weld the entire piece back in … the right way
dude has a welder and uses RTV 😭😭😭
After you put it altogether have to leave the dry for 24 hours before start using the car again.
Before I had a welder i would use aluminum flashing wrapped around several times with hose clamps.👌
close the muffler for a couple seconds when the car is idling, and hear your nice beautiful exhaust leak!
This has to be one of them april fools joke shet
Leaked u didn't fix it if you watch close
Genius, to go and spend all that money on silicone and clamps, when you can just weld it with your welder !
I was on board with quick, cheap, easy fix until the welder came out. Why not just seal the seams with the gasket maker? This is a video for people without welders.
i think the reason he didn’t weld is so that if anything else happens to his exhaust he doesn’t have to saw all the way through again
Always disconnect your battery before welding on a car 👍
Why do you have to disconnect?
@@IamAnAmerican. welder will arc the battery
So it doesn't ef up your electronic control module or any other electronics.
I have been working on cars for 16 years i weld at least once a week and have never had any problems and i never disconnect a battery
Bro legit just use a good band exhaust clamp 😂this is funny
What hack job.
Gotta be Canadian
This is the funniest thing I ever seen 😂😂😂
I’m wondering why he didn’t just use the 2 u bolts and a pice 1/6 over like a lot of people would
And if you have a welder why pour 2 rvt tube’s
This has to be some major trolling
She's fucking mint here boys!!! Holy
Without welding but he welds it at the end or maybe its just me lol
Ex-Army Motor Pool Mech 😂😂😂
He should be embarrassed by that repair, but he seems proud! This must be in a southern state!
I think this guy is fucking with us.
I guess it’d get you out of a pinch but honestly flex hose would do the same
2k likes for a ghetto hack job 😂
If you own a welder this would be the dumbest way to attempt fixing keyword attempt
You probably used to work on your motorcycle and learned to put red silicone on those pipes also- and yes… years ago…
You only need the because you cut the pipe in half. So just don’t cut the pipe in half and you won’t need the welder
Shit , did Jimmy rig that up .
Thousands? That would have been less than $100 at a shop to do it right.
If you’re going to weld it just do it the right way
"I got a buddy that can do it cheaper"
He's trolling 🤦🏽♀️😂🤣😂🤣
Awesome but where Can I buy the two police you added from please
dude spends all that time to fix the pipe when he could of just welded a the pipe in the first place...
That's what you call a red neck fix !!! You can go to auto zone or nappa get your self a segment exhaust pipe male female 2 flanges tight that together and voila less chance of your car catching fire cause of the silicone and best part you dont need the mig unless you want to weld the segment with the exauste and voila you saved a couple of hundred bucks and it looks a little more professional so when you go to the garage they wont have a blast laughing of you and it'll look better to !!! Good luck have a good one and god bless !!!
Red Green would be so proud… only difference is RG was a comedy sketch lol
thought this was smart until his ass pulled out the welder lmao
Just put a damn soup can on it. High temp not exhaust sealant.
Just weld the whole thing. Wtf
You could have just used a premade coupler from the parts store?
It may break over time if that's flexible connection
I’m sure this is a joke..
Yup find your exhaust leak using your finger turn to hotdogs.
I was like I guess if you don’t have a way to weld or money to go a shop but then he pulled out the mig and I lost it lol
Or you could just go to Napa and buy the proper size band clamp and some muffler putty and fix it in 5 minutes
😂 you can buy a "repair flange"
“oh alright cool it’s a way to fix an exhaust leak if you don’t have a welding rig. gotta imagine there’s a better alternative to silicone but whatever wor-”
*busts out a mig*
“…?”
YOU CAN WELD! Why don't you just replace that section correctly?
Silicone is not going to last long there. It is not made to withstand those temperatures.
Why use silicone when you have a welder?
Why didnt you just weld it if you already welded it after anyway
Shit smellin like sour cream n onion down there
How’d you know I farted?
No the easiest way to find an exhaust leak is with some soapy wooder.
Saved enough to buy a welder
It's welded at the end of the video 😂😂, could have done that from start
Omg I can see why it’s expensive to fix now 😅 lol
Band clamp would be cheaper and better
Sorry but that silicone isn't going to last you'd be better off using header exhaust wrap and not even cut it out
mmmm
I would just wrap sheet metal around like 1 and half times (or more) around and then band clamp
The welding will invite rust faster
But not everyone has a welder bro. 😅
Cause everyone has a weld kit laying around
This is the type of dude who tells you who to vote for 😂 dont listen to shit this guy says
Don't buy things from this guy
Gotta try it
hi kids, this is how you drop your cars resale value
Idk man the Mexicans down the street charged me $40 to fix mine
You don't even need a welder for this, just use a band clamp.
Wtf did I just watch.
Know it all people coming on here to tell you how to do it in 3......2.......1.......
Good job until noticed by the authorites.
Why not just put a new one on, ffs? Much easier than overhead welding a gastight seam.
lol you could have just used the piece of pipe you got a welder or you could have used a piece of pipe and two clamps or you could have used a band clamp and put it between the two pieces of pipe or you could have used a piece of flex pipe and two clamps that was just kind of weird
this is not a fix this is a waste
I thought I was gonna save some money and then they guy pulled put a welder.
Wait, this is not an April fools joke? This is horrible
That's all dandy for someone who owns a welder, but the average Joe needing it done with free resources won't have a welder
No no no if you're in a pinch I can understand you doing this but this is not a permanent repair this is a temporary repair to get home don't listen to this guy you're exhaust will fall out that is not safe at all
Lmao
Why don't you just weld a pipe on it?
why not just fix it right? that silicone is a NO GO