Great job... however, in the first part of the laying out process, he need not take the trouble to calculate all those "pies" etc.... just take a piece of paper and wrap it around the pipe and mark the circumferemce. Then just divide it by the number you want.
Thanks, for cleaning the welds I use Pferd Polifan A40 SG, after that sanding discs p80, p150 and p240 than polishing with some "no name" stainless polishing kit (polishing pad and blue compound)
Another approach could have been using a cone of cardboard, like kids have on their head on their birthday. Using the larger diameter as the base and the smaller one up as high as the length you want between the 2 pipes. Cut it at that point horizontally and use the lower part on the stainless steel. Only welds will be on each end and the closing. Less welding, less polishing.
Of course, there is an easier way to do this, but this is a DIY project that anyone with a welder can do. Also in this case the difference in pipe diameter is 30mm, so cheap pipe expanders would hardly do the job.
You are a wizard 🧙🏻♂ This is a good lesson of mechanical handicraft! Thank you friend!
You are a very good teacher !!! Bravo !
Great job... however, in the first part of the laying out process, he need not take the trouble to calculate all those "pies" etc.... just take a piece of paper and wrap it around the pipe and mark the circumferemce. Then just divide it by the number you want.
Good info!
Easier: just fold the paper 3 times in half to get the 8 stripes!! 2/2, 4/4 and 8/8!
No calculation at all!
Very neat workmanship, greetings from Indonesia
Nice work. I’m sure I’ll have to do it myself at some stage
Thanks
Thank you for your videos and knowledge!
Pretty Neat method. Thanks for sharing!
Lovely bit of work , what are the discs you used on the angel grinder to clean welds and Polish the stainless please
Thanks, for cleaning the welds I use Pferd Polifan A40 SG, after that sanding discs p80, p150 and p240 than polishing with some "no name" stainless polishing kit (polishing pad and blue compound)
Excellent work
Not perfect
But still excellent 👍👍👍
Das sind einfach skills Wahnsinn ❤
Looking great!
Very nice and prof. job weldone
Nice job !!
This is amazing.
Wow! ❤❤ great video
👍 super Video 👍 thank you
видео немного затянуто, но познавательно 👍
Realy nice
Another approach could have been using a cone of cardboard, like kids have on their head on their birthday. Using the larger diameter as the base and the smaller one up as high as the length you want between the 2 pipes. Cut it at that point horizontally and use the lower part on the stainless steel. Only welds will be on each end and the closing. Less welding, less polishing.
that's awesome
Magnifique....merci
Красиво. Но почему без поддува?
Genial Einfach=Einfach Genial
dude,.,.u no joke
Well if you made $1.95 per hour this would be useful instead of spending the $29.95 to just buy the flared exhaust pipe from the internet.
👍
Ну что я могу сказать? Ахуенно! Надо попробовать так же. А то я постоянно пытаюсь найти переходники для трубы в нужный мне размер!
😍😍😍😍😍😍😍😍
А то что заржавеет через полчаса никого не смущает?
No, it won't.
Belloooooo❤❤❤❤
A cheap pipe expander is easier and doesn't take 8 hours of Fab and you don't need a welder.
Of course, there is an easier way to do this, but this is a DIY project that anyone with a welder can do. Also in this case the difference in pipe diameter is 30mm, so cheap pipe expanders would hardly do the job.
По ходу чел не в курсе, что 1 клетка равна пяти мм 😅😅😅
🎉
Мне понравилось
I want your pipes, can i have one 🥺
Ebay $5
In the time it took you just to do the math I ordered two for $9 each stainless steel. My labor loans worth more than that
So what.
It's about using tools and fabrication. There's going to be a time when the part you want isn't available on line, what do you do now?