Excellent work. You only make for locals or do you ship to the states as well. Im in California looking for a nice heavy box for a couple of 10s or 12s.
Thanks. There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
Grabeha! Mura mani manufacturer sa Yamaha, Bose, Kenwood, Sony ug uban pang branded nga mga sound system 😎 By the way Sir ug wa matagak imong trabahu wako kahibaw nga pinas ra diay ni? Abi nko ug sa states ni😁
Hey man i appreciate your work 💜 Can you please tell me which type of enclosure i should make for a 10" 100w subwoofer And please suggest the amp board and driver Please man Love your work
Hoping you can help me out, what size rabbet bit do you use for notching the side wall for the carpet? Do you use router or table saw? Thanks, amazing work!
Hello, used a rabbeting bit and a router fence adjusted to cut about a millimeter. Watch this video at about 1 minute 55 seconds mark, showing how I cut the north for the carpet seams. ua-cam.com/video/Od8tsdvVFWo/v-deo.html
I need help coming up with design and measurements and calculations for 2 skar evl 10s. I dont have bassboxpro or anything so idk how I'd get the measurements 🙁
@@chrclmnky but how much if mag order tas taga cagayan de oro po ako and sa tingin ko sa sabi mong budget friendly sya tas targa na patok sa mga nag titipid pero malakas tingin maganda yan so how much po?
@@psychogaming4139 taga Butuan ra ko sir. Dool ra kaayo ta. Kini nga box shipped to Ormoc pa ni. Inbox nalang on Facebook if you really want to get car subs. Just search "chrclmnky" on Facebook.
I want to make a dual 8 inch subwoofer enclosure 30 inch wide 16inch depth 11 inch hight ...Is it possible to make this enclosure with a single MDF board ( 8ft hight - 4ft wide ) ?
Been great. The subs are built by Dai-Ichi, some old school hifi brand. Manufactured locally and marketed here in the Philippines. Very cheap but they're good.
boss about sa tuning nmo bah kanang 34Hz, mao na recommended sa box tuning or sa speaker rah? giunsa nmo pagkahibaw sa actual box tuning boss? pls enlighten me 🙏🙏🙏
Hello GD, software used are the following: Bass Box Pro 6 - box calculation and design TinkerCad - 3D modelling web software Dayton Audio DATS v3 - impedance meter
Thanks Rich, there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
Hello I have a question I have sign in and sign up for tinkcard just so I can make an enclosure like yours but it does not show me the measurements so I can cut my own boards it just shows me the 3D image file like is I was 3D printing help pleaseeee
@@chrclmnky I have tried for days looking up and down on the site I have created an account but I don't see any where there is a schematics link. Can you please provide a video on how to get to the link you are speaking of I think it would help alot of people who follow you and want to build some of the enclosures you have made
There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
SUBWOOFER TEST VIDEO - ua-cam.com/video/ToqDguyKRNs/v-deo.html
Kkkqki
I hope it’s not too late to ask, but what are the materials needed? And tools included?
hm po pgawa ng gnyang enclosure?
@@Erwin_Bergania inbox po on Facebook page @ChurchOfBass
how much this sub? ty
Nice work man. Sometimes the budget builds are just as fun as the complex ones.
Yes they are. 🔨📐
Has a perfectly good table saw, rips the long boards with a circular. My man!
MDF too heavy to down size with table saw.
@@chrclmnky Too heavy for you to move around, or too heavy for the saw?
@@CORZER0 both
@@chrclmnky Oh ok. Well keep up the good work!
Daming gamit ni idol. Kaka inspire. Parang andali nlng gawin pag may proper tools tlg. Dagdag pa yung nakapag aral ka ng audio technology.
🤘👌
Not me otw to Home Depot right now to buy mdf and build tht box bc it looks so slick dude 12/10 👏🏻👏🏻
👍😎🥳
Nice Work man ..👍 Your products are of very high quality.
Thanks very much Kithmal.
amazing job! i’m doing this too but, with 15’ subwoofer, looks amazing!
Your device and tools so sophiscated.
🤩
wow wala akong masabi sa inyo sir super galing..limpyo kaayo oi.if duol.pata sir pa asembol.ko.ug box nimo jud super..God bless..
Matsalams sir. 😎
You are kept very helpful share about subwoofer, it is also demantable post for who want to upgrade their old subwoofer. Thanks for the post.
Glad it was helpful!
Idola jud kaayu mugama bai oi...astig professional kaayu
Matsalams sir. 👌🤘
Grabe ang simple lang pero napaka ganda! Kung pwede lang talaga kayo sa north sir, eh
Thanks po sir. 🍻
At least Lelo got in on a little action again👍..nice work bro.
🐶
payter huwat rajud ko tagaan ani. hihihi grabi quality ike. nindut na lahus vacuum. kato mani imo gi post diay
Oo. Hinayan ko ani bag o nga vacuum
good job ..... but i wanted you to bump it ..... anyways i like you doing boxes more than the other guys on here ..... 😁👍
Perfect failsafe speaker box ,great job there
Thanks 🤘😎
Excellent work.
You only make for locals or do you ship to the states as well.
Im in California looking for a nice heavy box for a couple of 10s or 12s.
Thanks. I wish it would be just dirt cheap to pay shipments and boxes this size and weight from the Philippines to the USA.
Your work is always neat 💯
👍😎
As soon as I heard roosters crowing, I knew this was in the Philippines.
Hshahahahah
Don't be Jack Axxxxx..
This guy's sure really knows how to build and take care of his equipment ahhhhhh 🙉🙊🙈👀🤠💰
Awesome as always 🤩
Thank you so much 😀
Beautiful box☺️
Yes it was! Thanks!
Osm build..
Can you tell dimensions of of the box.
Thanks. There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
Ganda ng pgkagawa ng box sir 👍
Thanks po. 🔨📐🧹
Nice one ,kindly make a video of how to use Bassbox 6 pro
Ok will do.
Very nice work👍
Thank you E Dud
Hello a great video perfect job 👍👍👍greetings from Germany 🇩🇪 👋👋👋Kai
Thank you very many, Kai. 🌞👍🤘
Grabeha! Mura mani manufacturer sa Yamaha, Bose, Kenwood, Sony ug uban pang branded nga mga sound system 😎 By the way Sir ug wa matagak imong trabahu wako kahibaw nga pinas ra diay ni? Abi nko ug sa states ni😁
Hey man i appreciate your work 💜
Can you please tell me which type of enclosure i should make for a 10" 100w subwoofer
And please suggest the amp board and driver
Please man
Love your work
wow you are an artist
Thank you
Awesome as ALWAYS BRO!!!
😎📐🔨
sir tag pila set up yang ganyan khit dalawang 8inch targa lang,,,ganda kasi pulido ...boomboom talaga ang ganyan,,ang linis..
Kindly inbox on Facebook page @ChurchOfBass thanks
Finessed artwork👌🏾👌🏾! do you ship to Africa?😅 i would love to have such an art in my living room why lie....
Many thanks Uncle B
Hoping you can help me out, what size rabbet bit do you use for notching the side wall for the carpet? Do you use router or table saw? Thanks, amazing work!
Hello, used a rabbeting bit and a router fence adjusted to cut about a millimeter. Watch this video at about 1 minute 55 seconds mark, showing how I cut the north for the carpet seams. ua-cam.com/video/Od8tsdvVFWo/v-deo.html
Perfect, thanks!
Big fan brother.your work awesome exilent
Thanks Jass
Haha that cute dogs check out the camera 🥰🤗
😁
Dig the old-school woofers
👴🏚️=🆒
nice set up..very clean...
👍
Im juat wondering how much power are those bc the look like the same size as mine and if can i get the measurements in metric
Those were just about 150-200w RMS.
Excellent craftsmanship brother. What country are U in. Considering having u build me a box. Keep up the good work.
Thanks. I'm on the other side of the planet, the Philippines. 🌞
@@chrclmnky Cool. I have family in Limasawa island
Betans man diay ka brod. Idol gyud brod
Unsay betans?
Eres un gran profesional tío.. ojalá tener un profesional así aquí saludos
Thank you very much, Hugo Guillermo.
Lindo trabalho está de Parabéns 👏
Thank you Carlos. Cheers!
สวยมากครับ👍👍👍from thailand
Thanks brother.
Can you make subwoofer enclosure like svs 1000 pro?
I can try
Ok can’t wait 😀
I need help coming up with design and measurements and calculations for 2 skar evl 10s. I dont have bassboxpro or anything so idk how I'd get the measurements 🙁
Paypal me $10 and will do one schematics or two. Kerfed birch top mount box?
Achup kaau boss! Power! 👌
🤘 🤙
Nice your job
Thanks a bunch Oswald
cause ive been a subriber since 2019 at nakita ko na magaganda mga gawa mo
Thanks po sir.
@@chrclmnky but how much if mag order tas taga cagayan de oro po ako and sa tingin ko sa sabi mong budget friendly sya tas targa na patok sa mga nag titipid pero malakas tingin maganda yan so how much po?
@@psychogaming4139 taga Butuan ra ko sir. Dool ra kaayo ta. Kini nga box shipped to Ormoc pa ni. Inbox nalang on Facebook if you really want to get car subs. Just search "chrclmnky" on Facebook.
@@chrclmnky okay po
Классный сабик)))👍👍👍
Good morning 🌷🌷
Same to you
Hey bro, I'm curious what u use for designing / tuning the subwoofer box
Hello, I used Bass Box Pro 6. And a Dayton Audio DATS v3 and its hardware.
Sir baka may single box design ka din for 10" Targa SVC
@@renzcastro5830 not much of a difference for a single 10
enclose size plz love from india
I want to make a dual 8 inch subwoofer enclosure 30 inch wide 16inch depth 11 inch hight ...Is it possible to make this enclosure with a single MDF board ( 8ft hight - 4ft wide ) ?
One board is more than enough. 👌
@@chrclmnky thanks man 😊
You make enclosure for 2 Way 6 inch cars speaker
ayos sir pang masa.. 😁 Sir parequest X12 MRV-F100
Thanks po
Diy my ass this is professional work lol....nice box✊
Ha! 😂
Very nice 👍
Tnx 👍
How about 6.5 inch dual sub do tou have tutorial on how to make this?
No not yet
@@chrclmnky hope you make one with details 😁
@@Eighty86Six-fu5rc ok
Sir ganda ng gawa.. magkano po mgpagawa ng ganyang box for dual category 7 CSW10?
Thanks very much po sir. Kindly inbox me on Facebook page at @ChurchOfBass
Nice build thank you for sharing
Thank you Jesus. You are awesome. 👌😎
can you do a 15inch sometime not only 10 or 12
Very easy.
Which software have you used to find the box dimensions?
Hello George. It's Bass Box Pro 6
@@chrclmnky thanks bro
What specific mode of targa 10” speakers did you use? :)
X-100-i, a local version here in the Philippines.
@@chrclmnky thanks. Plan nako ilisan ako bose f1 na subwoofer. Busted ang isa. Pde ra ni dba?
Can you build a subwoofer box for 4 12inch woofers
Hope a customer want a 4 sub box.
Build inbuilt subwoofer box. Rare in UA-cam history
ok
Is this the targa we have in south africa 😳
No. They're different.
Waiting for this video #fz lover
Thanks
Sir gawa kayo vid about kung pano kayo nag simula gumawa ng car audio builds. 💕
Ok will do. Thanks.
Quality ...cute si dog
I need one 3way crossover design please
Hey bro howzit goin, I want to ask about the subs, what year are they because im actually familiar with Targa subs
Been great. The subs are built by Dai-Ichi, some old school hifi brand. Manufactured locally and marketed here in the Philippines. Very cheap but they're good.
This is awesome,i have 8 inch in my video ,,super bass
Nice
What type of wood/board are you using, is it a mdf board?
MDF, yes
@@chrclmnky thank you those are nice build boxes for cars hope i had the right tools and proper training, kept it up..
Que tal amigo, grandioso sudwoofer. Saludos.
Gracias, Jairo
Sir baka pwede patuning ng pang d6 lang ganyan sana
@@PatrickSantos-u9x ok
A build done right
📐🔨
Nice bro
Please make a dual ya single 15 inch subwoofer box
Yes
Boss may 2xd10 din ako targa naka mdf Lported 32hz with 1000w lightning lab mono mas ok ba gnyan box kesa sa Lported ko ty
This box is an L port, but independent to each sub's chamber.
Subwoofer prece Link
How to buy
boss about sa tuning nmo bah kanang 34Hz, mao na recommended sa box tuning or sa speaker rah? giunsa nmo pagkahibaw sa actual box tuning boss? pls enlighten me 🙏🙏🙏
Di diay klaro sa video sir ge unsa pag sukod sa actual box tuning?
Bonjour vous utilisez quel logiciel pour la fabrication des caisson merci
Hello GD, software used are the following:
Bass Box Pro 6 - box calculation and design
TinkerCad - 3D modelling web software
Dayton Audio DATS v3 - impedance meter
@@chrclmnky ok thanks
@@chrclmnky hello in the software there is no option for L ports
How much for that box i would like to buy it....please let me know
Just a few dollars
@@chrclmnky if its too bulky to shipped, ill take it in pieces and i can put it together myself.....give me a price
Sir do you the size of dual 8" Lported box
Aero port trapezoidal box
This one ua-cam.com/video/LHgd-WoCYXM/v-deo.htmlsi=7N5ZfytOfXXMir3E
Muy buen video amigo saludos desde México.... Seria molestia si pudiera mandarme las medidas tengo un par de kicker 10 y me gusto su cajon
Hello, there is a link to the TinkerCad design and schematics in the video description. Check it out.
@@chrclmnky muchas gracias y buenos videos mucha 🤞
Hi ask ko lang po is mdf cheaper than marine ply wood? Wala kasi akong mahanap sa lugar namin na mdf
Kaya sa dati kong dual 8 inch na targa ordinary na 1/4 3ply ung ginamit ko
@@markusvillamor mdf = 1300 per sheet
Plywood = 2500 per sheet
Thats allot cheaper than i expected
Idol tanong ko lang po kung anung tawag dun sa Dayton na pangtest ng Frequency ng Speaker? Salamat!
Dayton Audio DATS version 3
@@chrclmnky Thank you!
Great work , what dimensions would 4 ten inch type R's need ?
Thanks Rich, there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
Ola, sobre o software existe algum link para donwload
Hello, sorry there is none.
Thanks
Sir delivery hota hai kya
Please do Studio monitors FARFIELD monitors
Hello I have a question I have sign in and sign up for tinkcard just so I can make an enclosure like yours but it does not show me the measurements so I can cut my own boards it just shows me the 3D image file like is I was 3D printing help pleaseeee
Hello Giordani, you need to create an account and login to TinkerCad, then open the schematics link, copy and edit.
@@chrclmnky I have tried for days looking up and down on the site I have created an account but I don't see any where there is a schematics link. Can you please provide a video on how to get to the link you are speaking of I think it would help alot of people who follow you and want to build some of the enclosures you have made
@@s0nesessary1 www.tinkercad.com/things/66uEcrIU37p
sana boss may page ka sa shopee and lazada para madaming umorder sayo try molang boss kahit mga 5 pcs na d12 5 pcs na d15 hehehee
Thanks but too busy on local installs po sir.
@@chrclmnky sir how much po magpagawa ng ganyan 2 pcs 12" or 10"??
Top vids
This is the leather you put on wood, what is its name?
Hello, it is a charcoal black speaker carpet.
So, what are the actual dimensions of the box?
There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
wizard n magic
Boss..pde po ba Ang mga sukat po nyang box n gawa nio mula sa maliit hngng sa malaking sukat po
There is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
what is the measurements pls.✌✌
There is a link to the Tinkercad schematics in the video description.