Lightning lab subwoofers: Product link 1: s.lazada.com.ph/s.MaxKQ?cc Product Link 2: s.lazada.com.ph/s.MaCaW?cc Para sa sukat ng box panoorin lang mabuti ang vlog ko andun po sukat ng tabas sa board at division sa loob. Panoorin nmn po sa link na ito kung paano ko ginawa ung Aeroport Tuning Port 👉👉👉 ua-cam.com/video/-evrbgos73E/v-deo.html
A friend built a box something like this for me. But I had two 10's each one sealed side by side. But one woofer had to be in reverse polarity to work. But everybody thought I had 15's it was loud and didn't take much power. Good job !!
Sounds like he/she built an Isobaric enclosure for you. You have to wire them in opposite phase so that they push/pull together, since they face each other :)
@@KidCoyle we had them inverted from each other. I don't think that really matters you still have to have them wired reverse polarity. And the box was huge!
Man this guy used all his available resources to build a very solid beautiful subwoofer enclosure!! Yes he has a nice little tool setup but there are things much more sufficient. I bet that thang slapping too!
anganda sir ng bass thank u sa pag share mo nito...d8 na tosunra palang naka load sa ginawa namin ng brother ko..pero napaka sarap yun bass output...plan ko bumili ng ligthinglab d8 xlsd4....yan ang plan ko ikabit using ep4000 behringer power amp..
@@TAWITIBoyAllAround ano po b pwedeng maging sukat ng box kapag 6 inches lang po ang speaker na gagamitin ko? Plano ko po kasi lagyan mio ko ng 2.1 sounds..
You can inverted the mounting set the phase into 180°. But this subwoofer box is design for home theater only not for db drag use that is why it is fine to mount the subwoofer that way.
Makes sense, friction on the outside with the air movement. Seems like it would make for less air movement on the 0d side though. Possibly adjust inside partition for balance? Nice DIY!
100% do a transmission line! Tons of work but man does it pay off! I recommend using a transmission line calculator online and plugging in your subwoofer's specs. They sound absolutely amazing when done properly. Maybe only do this if you are fairly experienced building boxes though, unless you want the challenge! :)
Mas malakas pa kami sa jbl party box 710 yan. I heard it na max power ng jbly party box iwan bass nun sa bass neto. Low bass pa ito ung party box mejo mataas ang bass. Distorted na tunog kpg lowbass ang ponatugtog ng partybox.
i made desame size of 4rth bandpass.. the bass came from this kind of speaker box ia massive bass output....we have a jbl 710 in terms of bass.sheeess walang panama 710jbl ..i swear dude.. thank u sir sa pag share mo nito.
Yo tengo una así, el tablero del medio le hice ranuras y lo encastre, y el ducto o bass reflex no lo dejo enfrente a el parlante sino que a un ángulo de 15 grados, eso mejora la frecuencia de resonancia y evita el resoplo
it was similar to the aiwa subwoofer, I always found it weird that this type of putting one part of the sub to the outside is the other to the inside? no air outlet
May nakita akong Bose brand na subwoofer 12 inches ginagamit namin sa function nong sa saudi pa ako. Napakalakas' parang di mo malalaman kung saan galing ang tunog. . Ang design nya ay parang ganyan dn s video n yan kaso nakataub ang speaker at ung butas nya s itaas ay retangular 3" by 6" at 2" lng ang distance galing s itaas. Paliit ang butas nya habang paoob (parang trumpeta rectangular size). Ung butas nmn nya s ibaba ay nasa harapan dn parehas lang dn ang sukat ng butas at distance s itaas n butas.. midyo nagulat lng ako s distance ng speaker papuntang ibaba kasi nasa 5 inches lng papuntang sahig ng speaker', ibig sabihin makapa mo lng ung cone ng speaker galing s butas.
I am at beginning of my Build 12 Inch JVC CW DR124 350w rms/Class D 350w rms amp 4th order bandpass with a target freq area between 42 to 52 hz at 2.8db. Freq set to 47.00hz. Downfiring for 5.1 Home Theatre. I see u use a 2:1 ratio as such my enclosure will be a 28.3 L sealed side and 56.60 Ported side using the JVC enclosure sizes as a guide using the same formula. I am using winisd and the driver specs Thiele small params.
Lightning lab subwoofers:
Product link 1: s.lazada.com.ph/s.MaxKQ?cc
Product Link 2:
s.lazada.com.ph/s.MaCaW?cc
Para sa sukat ng box panoorin lang mabuti ang vlog ko andun po sukat ng tabas sa board at division sa loob. Panoorin nmn po sa link na ito kung paano ko ginawa ung Aeroport Tuning Port 👉👉👉 ua-cam.com/video/-evrbgos73E/v-deo.html
Hm po yan ganyan boss.
Good project , but the speaker coil should go to the Port side.. better cooling for the voicecoil 😊
ua-cam.com/video/FwGRXMAT_Mw/v-deo.html
pwedi pagawa sayo sir
Ìdol pwd po ba yn sa kinetic 12 inch ganyan set up ng box.. tnx idol
A friend built a box something like this for me. But I had two 10's each one sealed side by side. But one woofer had to be in reverse polarity to work. But everybody thought I had 15's it was loud and didn't take much power. Good job !!
Sounds like he/she built an Isobaric enclosure for you.
You have to wire them in opposite phase so that they push/pull together, since they face each other :)
@@KidCoyle we had them inverted from each other. I don't think that really matters you still have to have them wired reverse polarity. And the box was huge!
when I saw the car ... I said in my mind this man from Philippine and I was wright LooooL ... wish you more success dear .. and magandang umaga sa iyo
Tht 8inch sounds like a 12inch in tht box😯😯!! Super 😎
Man this guy used all his available resources to build a very solid beautiful subwoofer enclosure!! Yes he has a nice little tool setup but there are things much more sufficient. I bet that thang slapping too!
That's a sweet box for a home system! Very nice!
anganda sir ng bass thank u sa pag share mo nito...d8 na tosunra palang naka load sa ginawa namin ng brother ko..pero napaka sarap yun bass output...plan ko bumili ng ligthinglab d8 xlsd4....yan ang plan ko ikabit using ep4000 behringer power amp..
Making a big box like this with a sundown zv5 would be killer
Yeah, absolutely
mahilig ako sa sounds kya hnd ko pinapalampas mga ganitong content.thanks for sharing lods
പൊളി.... 🔥🔥love from Kerala ❤️❤️
ilang beses ko na po napanuod to boss..hataw talaga paanu na kung dalawang piraso yan.. yanig pati kapitbahay..
I have a sub like this with my Microlab speaker system. Super tight clean bass, really punchy- out of a 4" driver!
What is the name of the sub?
Camerava ,box Ulla vacha paaru ni anga nikkira 👍👍👍👌👌👌
oh man that would be a perfect box to do an isobaric set up
Ganda ng tunog, gapang na gapang ang bass.. Ganyan gusto ko tunog, baka po May design kayo para sa Mio 125 na motor..salamat po
Wala pa eh
@@TAWITIBoyAllAround ano po b pwedeng maging sukat ng box kapag 6 inches lang po ang speaker na gagamitin ko? Plano ko po kasi lagyan mio ko ng 2.1 sounds..
ayun sa wakas! thanks po sir ganda ng bass eargasm! =)
Sir mag benta ka ng diy mo na bluetooth speaker, sa shoppee, yung party speaker ksi na iba ang mahal e mas maganda pa gawa mo solid sir
Got one with a 12 inch subwoofer 🔊. Nice work nice solid build!
Hello sir, can you share enclosure measurements for the12" sub
Lakas idol ok Yan parang gusto ko tuloy palitan Yun miniscoop box ko Ng ganyan😊😊😊
Exellent work! You got me inspired to build a few boxes.new subscriber here
gling sir. nu twag po jn s tools nyo n pmbutas sir
Palm router
tnx so much sir god bless.
I have a sweet pair of Skull Candy headphones and I've never heard them sound as good as they just did just now. Impressive my friend.
Are they the Crushers? I used to have a pair. Really fun
@@KidCoyle sure are brother. Good times.
Galing idol subukan kong gawin yan
Should have inverted the woofers motor into the ported side to take advantage of the thermal effects.
You can inverted the mounting set the phase into 180°. But this subwoofer box is design for home theater only not for db drag use that is why it is fine to mount the subwoofer that way.
@@TAWITIBoyAllAround He is talking about cooling
Makes sense, friction on the outside with the air movement. Seems like it would make for less air movement on the 0d side though. Possibly adjust inside partition for balance? Nice DIY!
Don’t overpower or clip the woofer and you don’t need to worry.
@@TAWITIBoyAllAround boss ilang wtts ampli naddrive jan 8inch sub 500wtts
Pyro lover ka din pala paps. Subscribed!
Hi......I have pioneer 312d4 I want to use it at home......any ideas on the best cabinet design for perfect bass.
Slot ported or aeroported vented speaker cabinet is very nice for that driver.
100% do a transmission line! Tons of work but man does it pay off! I recommend using a transmission line calculator online and plugging in your subwoofer's specs. They sound absolutely amazing when done properly. Maybe only do this if you are fairly experienced building boxes though, unless you want the challenge! :)
Amazing Vibrate 0:03 Look Like CG
Cool Designs
Me gusta tus diseño del bafle o cajón acústico algo Flato ellos una del tapa del bufle esos creo yo del tamaño esta bien chido
Wow super ....muy buen diseño ...bajos secos ...ya estuvo el party...saludos...
Angas ng bass, parang naka JBL Partybox 710.🔥
Mas malakas pa kami sa jbl party box 710 yan. I heard it na max power ng jbly party box iwan bass nun sa bass neto. Low bass pa ito ung party box mejo mataas ang bass. Distorted na tunog kpg lowbass ang ponatugtog ng partybox.
Tooop dimais siô 😊
@@TAWITIBoyAllAround anung size ng sub speaker po at anung brand po.?
How you can compare this to that poor partybox 😂 that single sub is stronger than 10 partybox 710 lmao
i made desame size of 4rth bandpass.. the bass came from this kind of speaker box ia massive bass output....we have a jbl 710 in terms of bass.sheeess walang panama 710jbl ..i swear dude..
thank u sir sa pag share mo nito.
Nice.. bagay to sa indoor.. 👍👍👍
Great video bass sounds 👍
Solid po sir .. full bass kahit ma liit lng .
Sounds good man!!!
Ganda sir malambot ang bass, gumagapang.
Brasil curtiu 🇧🇷👏👍
Muito top né.
Good job！ Big sound... Very Good!!!
😄 😄 😄 😄 Masih gleer psw ku,, 6 inc x 2= 12inc 👍👍👍
Good luck always you chanel my brother 🤲 🤲 🤲 👍 👍 👍
Galing sir ng mga tools nyo. Pang workd class sir ang pag kaka banat nyo dito, kahanga2
hm pagawa nyan sir
Молодец. Красиво сделал. 👍👍👍
I love this box. And very deeb bass and soof bass ❤️❤️
Ganda boss. Boss tanong lang po San mo po nabili yung port na linagay mo. Advance thanks boss and Happy New Year
Ginawa ko lang yan
Idol, gawa ka naman video tungkol sa guide ng circular saw mo and ppano sya gamitin. Tips and tricks na dn. Ty, idol more power!
Cge sure next time lods.
Which speaker you used to build this
Team lightning lab a philippine speaker brand. But this subwoofer is manufactured in China i guess.
Bhai bahut tagda bass hai😎😎😎
Yo tengo una así, el tablero del medio le hice ranuras y lo encastre, y el ducto o bass reflex no lo dejo enfrente a el parlante sino que a un ángulo de 15 grados, eso mejora la frecuencia de resonancia y evita el resoplo
Podrías enviar una foto... O diagrama de tu cajón...
@@jesusroque2233 si encuentro la foto la subo a mi perfil y la ves ahi
Amigo soy de PERU Saludos. Se podría también para un parlante de 18 p?gracias si podrías una foto de la caja que usted tiene.
OSM Sound quality 🔥💯
Very good
blogger kana pala paps
merry christmas bro. pwede ba yung port ay di yung bilog na pvc gusto yung mdf din lang yung di bilog at magkano?
salamat
Pwese nmn, same price lang na 4k kpg pick up dito samin. 50% D.p.
Bandpass boxes make the best subwoofer boxes.Only thing I would have done different would be to add rubber feet instead of plastic.
Sensacional 🇧🇷👏🏾👍
Fkkkk... Very boom that bass.. Nice job bro 👏👏
Belo trabalho e que sub grave lindo
Thanks
Ganda ng tunog master hahahah lupet
it was similar to the aiwa subwoofer, I always found it weird that this type of putting one part of the sub to the outside is the other to the inside? no air outlet
Yes, it is sealed chamber on the motor chamber.
Bass is awesome, fantastic 👌🏼👌🏼👌🏼
Не так все просто с бандпассом...
И по нижней частоте предел более ярко выражен
English pls. Thanks
@@TAWITIBoyAllAround My comment is not informative. You did great👍
@@TAWITIBoyAllAround You can build a box, can upload videos but can't use Google Translator? Baliw!
I will try make a model like your . Amazing
мощно , класс !!!!!!!!!!! 👍🖐😱
, Excellent idea! Love it.
Ficou top de mais
Wow Amazing Bass 😍😍😍.....From kerala
Ganda ng sound solid tlga ,😁
Boss new subscriber po from batangas,😊
This should be a great clothes dryer
Melhor subwoofer que eu vi e ouvi até agora.
...very good... thank you form thailand 10 november 2022
I love 4th order band-pass bass box!
6×9oval speaker me band pass enclosure lagane se kya hoga, car me
Perfect work well done 🙏😇👌👏👏👏👏👏👏👏👍⭐⭐⭐⭐⭐
Watching now master. Bagong kaibigan
sarap sa feeling ng base tlga tipong lasing na kau tpos nabaliw na kau sa espiritu ng alak tpos naagplay ng bass boosted na music 😂😄
Bro meron ka bang pang 10inch at 12inch box design sayang mga subwoofer ko galing ng design mo..
Mga simpleng box lang na slot ported
Subokan KO nga din idol,na gumawa Ng pang subwoofer idol.
Sir itry mo jan yung tosunra d8 ma sub 800watts. Kung maganda output. Abangan ko sir
Kpg me budget na
Excelente. Como quedaría para un subwoofer de 12 pulgadas de 600 rms saludos desde Colombia
Wow lalim ng tunog 😍
Amazing Punching....
Woooowwww
Saludos desde costa Rica 🤪
Totally parfect 👍👍👍👌👌👌👌
Vientos👌
Esactamente esa es mi tirada
Ayus sir oOrder po ako nito
Gandaaa thats what ilke o hinahanap ko
Wow ang ganda ng gawa mo kabayan.
We don't need no stinkin' workbench 👍
Ganda ng Bass 😍
Yan Ang subwoofer ng Sharp component dati,malakas yan sa sub parang CV
Nakaka inspire po kayu boss kc sa video mo madami kami natutunan ... keep up the good work lods...mabuhay ka...pasipa ng bahay ko lodi...
Thanks lods
Napaka angas ❤❤ 🔥 🔥
May nakita akong Bose brand na subwoofer 12 inches ginagamit namin sa function nong sa saudi pa ako. Napakalakas' parang di mo malalaman kung saan galing ang tunog. . Ang design nya ay parang ganyan dn s video n yan kaso nakataub ang speaker at ung butas nya s itaas ay retangular 3" by 6" at 2" lng ang distance galing s itaas. Paliit ang butas nya habang paoob (parang trumpeta rectangular size). Ung butas nmn nya s ibaba ay nasa harapan dn parehas lang dn ang sukat ng butas at distance s itaas n butas.. midyo nagulat lng ako s distance ng speaker papuntang ibaba kasi nasa 5 inches lng papuntang sahig ng speaker', ibig sabihin makapa mo lng ung cone ng speaker galing s butas.
SHOW DE BOLA ESSA CAIXA TOP D+ , E AINDA COLOCOU AS MEDIDAS PARABÉNS
Mas ela foi projetada para aquele alto-falante.
Se for outro, seria outra caixa.
Sos Mi ídolo... Yo kiero hacer uno así pero no creo poder xq ak en mi país nose si viene la pinturas. Etc.
Good bass super bro❤
Bro place make 15 inch speaker subwoofer design please make bro❤❤
I am at beginning of my Build 12 Inch JVC CW DR124 350w rms/Class D 350w rms amp 4th order bandpass with a target freq area between 42 to 52 hz at 2.8db.
Freq set to 47.00hz.
Downfiring for 5.1 Home Theatre.
I see u use a 2:1 ratio as such my enclosure will be a 28.3 L sealed side and 56.60 Ported side using the JVC enclosure sizes as a guide using the same formula.
I am using winisd and the driver specs Thiele small params.
Me encanta el cajón da muy buen bajeo,aproposito que canciones son esas ,podrías publicar la lista de tracks?
Ang lupit pagka gawa
nice DIY!
Dumadagundong Ayos!
Boss pwede pagawa ako dalawa para sa targa 8” subwoofer?
Pwede
Hey bro, i like this project