U Bout sharp as a marble boah Aint even got a profile picture an got the nerve 2 run yo mouth What u jealous cause you dont have anything in yo entire life worth recording? Such a sad way to live
This is as real as it gets. I appreciate you not editing out the mistake on the dot. That's real. Great job on everything you picked out, gonna have a very sharp piece when you are done.
Seeing a lot of comments about the ability to mount the sight directly to the slide without the use of a plate. Yes a Glock 43x MOS can have an optic put on it but in most cases the rear lugs have to be ground down. It’s much easier to buy a plate, and mount it up that way. It doesn’t raise the optic enough to raise height over bore concerns, I’ve built 4 43x’s for some buddies and have sighted them all in at 25 and can confidently hit steel at 50 with them running a plate. Save the time, effort, and overall ease of the build and buy a plate from a reputable brand.
@@Trey_Henderson43x does not come with plates. It comes with a shield rmsc cut its different than glocks full size mos system. So anything dot with that footprint will direct mount.
@@rog-e-rogj7632are you planning on getting it milled or using a dovetail plate? I’m new to firearms and dumbly got a 43X in a nickel finish but it’s not MOS. Deciding if i wanna buy a new 43xMOS or 19xMOS or if i just wanna send it somewhere to get it milled. Genuinely can’t decide.
@@majorwakanda8858 I will probably leave it be…I’ve used a red dot, but for the shooting I was doing, it did t bring g a lot to the table. They are neat tho….
Hello, I am a mechanic technician, In general, though there were a few hiccups, which are okay, I recommend putting the locktite on the edge of the screw hole instead of on the screw. If you put locktite on the screw, it can start to back out because of the bubbles.
The fact that hes sharing is cool in its self. Its not about what you guys would do its about what he decides to put in his arcenal wich every last one of us has made mistackes when building this is how you learn. Every last one of us at some point as well decided fuck it i want every gun if it goes bang i fuckin want it. So please stop actin like your advice is by the book not everyone is you and thats how yall need to start movin.
I did mine kinda similar to yours as soon as my gun store called me telling me the 43xmos have finally arrived after they released them ! Put a Trijicon RMS trijicon suppresor night sights to co witness , TLR sub, put in a Johnny Glocks trigger and this X pumps out the rounds over 4000k no hiccups and I can ring steel at 100 yards all day with it. That Johnny’s Glock trigger is a game changer 🔥. Happy Holidays. Yeee yeeee
Recently got a Glock 48MOS but didn’t like the 10 round capacity so I had to buy 15 rounds and I had to change out the mag release. Let me just say that was the difficult part lol good luck on yours.
Love my 43x. Great build. I decided to keep everything OEM. Practice with the crappy sights and Got Good with the aim believe it or not. OEM internals and OEM mags. Only addition was talon Grips. To me it’s a tool and that tool needs to always be useful and workable and reliable. Can’t go wrong with a stock Glock. Stock Glocks always Rock as they say. Well as I say 😆. 8,000 rounds later has ran flawlessly other than one failure to feed. But enjoy that 43x a Glock I will be carrying and trust my life with for the long haul. Great video and now subbed.
Bro tell me why dude at Sportsman’s told me not to get the 43x as my first pistol. I did not listen. I love this Glock so much 🤣 looking forward to more videos! Hope the shield arms works out for you! I got the +4 just so I wouldn’t have to go aftermarket. Heard both great and bad things about shield arms! Cool video bro
I’m honestly not sure if they’ll ship to Turkey. I’m located in the states and I ordered them direct from “shield arms”. But “palmetto state armory” also has 15 round mags!!
Dope vid man. Glock is the best and easiest to customize. Lots of more dope options for carry tho, 2024 a great time to find the right tool that suits ones needs
I did the same except the mag well. I also put a back strap with extended beaver tail, Apex trigger,Also a iwb and owb holsters. It’s a great edc pistol.
I just recently put talon grips on. My first time using them and I like them so far I’m going to see how they hold up after a couple hundred rounds. I think I may go with an apex trigger also.
Have a similar set up except I have XS R3D 2.0 night sights, Swampfox Sentinel 2(mounts directly to the slide), I kept all my Shield Arms parts black and have Gen3 S15 mags which I ran about 800 rounds through each mag with 115, 124, 124+p and 147 to check and test feeding (not a single issue)
@@lifewithzae444 honestly I have Swampfox optics on all my firearms and the shake to wake technology as very precise, they’re tough, holds zero and been perfect for me after thousands of rounds.
Thank you ! And I use my phone most of the time but I also have GoPros. In this video it was my phone and no I haven’t started using mics yet but I’ve thought about it
At least you didn’t install the light backwards. My god😂 but you need to upgrade the sights to co-witness with the optic. Good video nonetheless. Keep’em coming!
Done ! Check under video and let me know if you can see it! But me personally I’ve never owned one but I have shot a couple and I feel for the price they’re a great starting option!
@lifewithzae444 sure can! 😊 thanks!! And i just got the taurus judge last week. Love ittt. But my first gun was taurus g3c and its probably gone through 500+ rounds and havent had any failures. :)
@@lifewithzae444 it's actually pretty nice. I personally got the public defender poly from academy. For 449 I think. It's just finding ammo is the tough part. But it feels nice. Grip coild be a bit bigger but thats just me. But it's weight isn't bad. It's obviously on the heavier side because it's a revolver but I like it!! I'd recommend it tbh. :) ☺️☺️
They’ve been good so far, I’m going to keep running them I hope it stays that’s way but I’ve been seeing a lot of comments about those I wanna test some out !
the tlr7 sub has a tool that comes with it bro to tighten it down nice build tho i have the same setup just on my psa micro dagger c-1 ive changed out a few things like firing pin to a oem glock pin i went the shield arms route as well due to i bought the slide for the dagger first and a glock 43x non mos lower. due to the lowers from psa not being in stock at that time. About 6 months later i got the actual slide from them which i just swapped it all out since i already had the mags
Nice! Me personally, had issues with the S15 mags plus I didn’t want to change the mag catch. The PSA micro dagger 15 round mags worked flawlessly and are less expensive.
Whaaaat? I thought the S15 was the only option out there for that bigger capacity. Definitely gunna check that out cause I can't bring myself to get mags with all the bad reviews.
Nice set up. I just don’t trust the S15, I had to pull out on 3 wild dogs yesterday and the mag dam near fell out. I immediately went back to the original magazines
this must be a gen 2, i got mine probably 3 years ago i don’t remember them even having an mls slide for 43x out then but i could be wrong i know for sure they didn’t have an option for rails
I’m not 100% sure when the mos was released but I do know it was two different versions of it when I was first introduced to it. I was always told to make sure I got mos so I wouldn’t limit myself Incase I wanted an optic
@@TheBlackconsigliere magwells assist in quicker reloads. And they don’t necessarily make the print bigger depending on the person carrying and their carrying style it may not affect them at all. Plus they help seat your hand also on smaller guns or even on bigger guns depending on hand size
A future content creator you are not.
Dang I’m sorry you feel that way lol, WATCH ME 😂🫡
@@lifewithzae444hater are going to hate homie🫡
that’s crazy cuz i was sittin here thinking i enjoy watching bro hes jus real with it not trying to act like he knows it all
@@kyralanham9506 I appreciate that ! It’s the good people like you who keep me motivated
U Bout sharp as a marble boah
Aint even got a profile picture an got the nerve 2 run yo mouth
What u jealous cause you dont have anything in yo entire life worth recording? Such a sad way to live
I just bought a 43x and watching videos on the pistol. Came across this video and you are doing everything I want to do with mine. Thanks for sharing!
No doubt! I hope you enjoy your 43x. Get out train and stay safe !!!
This is as real as it gets. I appreciate you not editing out the mistake on the dot. That's real. Great job on everything you picked out, gonna have a very sharp piece when you are done.
Thank you! I appreciate that a lot !
Seeing a lot of comments about the ability to mount the sight directly to the slide without the use of a plate. Yes a Glock 43x MOS can have an optic put on it but in most cases the rear lugs have to be ground down. It’s much easier to buy a plate, and mount it up that way. It doesn’t raise the optic enough to raise height over bore concerns, I’ve built 4 43x’s for some buddies and have sighted them all in at 25 and can confidently hit steel at 50 with them running a plate. Save the time, effort, and overall ease of the build and buy a plate from a reputable brand.
Does it not come with plates? My 43X isn’t a MOS but my Gen5 19 MOS came with plates in the box.
@@Trey_Henderson43x does not come with plates. It comes with a shield rmsc cut its different than glocks full size mos system. So anything dot with that footprint will direct mount.
Im always excited to find a new guntuber and this video makes me wanna go all out on my 17.5
Thank you !! I hope the build turns out great !
saw someone say "future content creator you are not." i see you blowing up enjoyed this vid keep up the good work
Thank you, I appreciate you🙏🏾 I make videos for people just like you
@@lifewithzae444my 43x is NOT a mos….but I may still put a dot on it.
The 15 round mags I bought for it would not load all 15😂.
@@rog-e-rogj7632are you planning on getting it milled or using a dovetail plate? I’m new to firearms and dumbly got a 43X in a nickel finish but it’s not MOS. Deciding if i wanna buy a new 43xMOS or 19xMOS or if i just wanna send it somewhere to get it milled. Genuinely can’t decide.
@@majorwakanda8858 I will probably leave it be…I’ve used a red dot, but for the shooting I was doing, it did t bring g a lot to the table.
They are neat tho….
Hello, I am a mechanic technician, In general, though there were a few hiccups, which are okay, I recommend putting the locktite on the edge of the screw hole instead of on the screw. If you put locktite on the screw, it can start to back out because of the bubbles.
Thanks !
@@lifewithzae444 Anytime, very clean build though.
Even tho the start was rough. It was still informative and entertaining. Keep do your thing bro. 🔥
I appreciate that!! Thank you!
Just FYI: there are red dots that are designed to mount directly to the slide of a 43x/48. One is actually made by shield arms.
Lol I was wondering when you was going to realize you needed to mount the optic 😂
I had a brain fart 😂
Nice video and set up. I’m glad you didn’t use any cheap Amazon stuff. 🔥
The fact that hes sharing is cool in its self. Its not about what you guys would do its about what he decides to put in his arcenal wich every last one of us has made mistackes when building this is how you learn. Every last one of us at some point as well decided fuck it i want every gun if it goes bang i fuckin want it. So please stop actin like your advice is by the book not everyone is you and thats how yall need to start movin.
How come changes like guide rods or pyramid triggers aren’t talked about as much?
I did mine kinda similar to yours as soon as my gun store called me telling me the 43xmos have finally arrived after they released them ! Put a Trijicon RMS trijicon suppresor night sights to co witness , TLR sub, put in a Johnny Glocks trigger and this X pumps out the rounds over 4000k no hiccups and I can ring steel at 100 yards all day with it. That Johnny’s Glock trigger is a game changer 🔥. Happy Holidays. Yeee yeeee
Sounds like an awesome build man !! I hope you enjoy it !
Great video brother, you should do similar videos but more of like a asmr approach that would be sick
Recently got a Glock 48MOS but didn’t like the 10 round capacity so I had to buy 15 rounds and I had to change out the mag release. Let me just say that was the difficult part lol good luck on yours.
I watched this whole thing and loved it . Thanks man . Gonna pick up a 43x nedt week at bass pro just kitted out my 19x and love it
No problem, I hope you enjoy them as much as I do !
Hell yeah just got my 43x planning on building it up similar.
They are perfect out of the box
I just picked up my 43x mos today. i wanna do pretty much everything u did
You’re going to love it !!
Good video. Im doing the same setup on my 43x
Great additions to that 43X! You've got a new Sub.
Thank you!! 🙏🏾
Love my 43x. Great build. I decided to keep everything OEM. Practice with the crappy sights and Got Good with the aim believe it or not. OEM internals and OEM mags. Only addition was talon Grips. To me it’s a tool and that tool needs to always be useful and workable and reliable. Can’t go wrong with a stock Glock. Stock Glocks always Rock as they say. Well as I say 😆. 8,000 rounds later has ran flawlessly other than one failure to feed. But enjoy that 43x a Glock I will be carrying and trust my life with for the long haul. Great video and now subbed.
One of the best Glock 43x builds i can’t lie Can you do a Glock 26 build?
I think I can make that happen 🫡
Bro tell me why dude at Sportsman’s told me not to get the 43x as my first pistol. I did not listen. I love this Glock so much 🤣 looking forward to more videos! Hope the shield arms works out for you! I got the +4 just so I wouldn’t have to go aftermarket. Heard both great and bad things about shield arms! Cool video bro
I’m glad you didn’t listen the 43x is great ! Thank you though!!
I also just bought a 43x and i am looking at more capacity. What do mean by the + 4 ?
@@carelrossouw7838 it’s an extension for your stock mag which allows more capacity! Look up +4 extension 43x and glockstore should pop up!
@@carelrossouw7838look up +4 extension 43x glockstore should pop up!
@@carelrossouw7838 it’s a baseplate that lets you add a couple more rounds in the magazine
Thanks for speeding up the video.👍🏾 I don't particularly care to see or hear about peoples labor pain, just show me the Baby! 😂
Nice build! The only issue is that the mag well makes the gun print similar to a g19.
Looks good I put all red on mine.
I fw your video bruh keep up the good work
People hatin for no reason keep up the good work bro I just subbed
I appreciate that bro for sure !
Nice video keep doing your thing look forward to seeing the final product
Hey bro can you make another video on how those s15 mags worked out for you.. cause I've had 0 luck with them.. the PSA mags are way better IMO tho
Bruh you got everythingggg right off the rip 🙏🏽😮💨 the 43x looks tough asl but fs definitely get rid of them plastic oem Glock sights
You do not need a plate jus adjust the recticle been running mine without a plate, been doing fine
After4 months how's the reliability of the Shield mags?
Just got my 43XMOS, a little research and I saw the the shield was kind of inferior to the PSA Dagger. Mine Should arrive in 2 days.
You made a good choice.👍👍👍
Anyway to post links to your build? Id like to put something like this together
I run a SwampFox Sentinel on my 43x and it doesn't require a mounting plate and runs flawless.
Where can I find a 15-round magazine? Will it be shipped to Turkey? In which country is it available?
I’m honestly not sure if they’ll ship to Turkey. I’m located in the states and I ordered them direct from “shield arms”. But “palmetto state armory” also has 15 round mags!!
Try the PSA mags too....mine hates the S15's but runs great on PSA micro mags
Can that holosun 507k fit a tisas px9 gen 3 duty 9mm
Don't forget to swap out the plastic guide rod for a titanium one. You can get one at the Glock Store. It will make a big difference.
Not true I have 4000k rounds out the plastic guide and it rings steel at 100 yards all day!
If you see you having ejection problems its probably the right screw is rubbing on the extraction rod
Nice setup King, just subbed 💪🏽
Love my 43x and 48, but my psa micro dagger has taken their place. Not sure if I’ll keep my g’s. Great video man!
Thank you!! I’ve been seeing so many comments about the micro dagger I wanna try one out !
Dope vid man. Glock is the best and easiest to customize. Lots of more dope options for carry tho, 2024 a great time to find the right tool that suits ones needs
Bra First time seen this type of assembly, but ur right on time w this thanx man…3:55 am
No problem bro thanks for watching i appreciate you !
Gonna be getting mine in a couple months and gonna have a similar build with the 407k. What iron sights did you end up going with to co-witness?
Night fision stealth, lower 1/3
Nice vid man, Im. Curious is the Holosun scs will mount on g43x
Sick build !
Mag catch * but how have the shield arms mag been running for you ?
Wondering the same thing, i’ve seen a couple of videos of malfunctions with those.
ua-cam.com/video/jPAPVlHYMd8/v-deo.htmlsi=EVLsC-lJdiMMD1N8
Dental pick is the best tool for changing the mag catch. Torque the holosun to 15 inch lbs.
How are you liking the 507k? And what sights did you purchase to co witness?✌️
507k is great so far ! And I went with night fision sights
That’s 🔥, love the light too.
Hey bro, do you need that DPP plate before putting on the MOS sight?
I thought the MOS just screwed right in.
Yes you need it ! Atleast for the holosun, it’s possible to be direct mounted but slide would have to be slightly milled down
@@lifewithzae444 oh ok thanks, I just ordered the plate, thank you, good video btw
@@original_silverdee thank you ! And no problem brother happy I could help!
I did the same except the mag well. I also put a back strap with extended beaver tail, Apex trigger,Also a iwb and owb holsters. It’s a great edc pistol.
I just recently put talon grips on. My first time using them and I like them so far I’m going to see how they hold up after a couple hundred rounds. I think I may go with an apex trigger also.
Great video, I’ve been wondering what attachments I can add to my 43x! This helps alot!
Thank you! I really appreciate you watching!
This is my setup, except for the mag well. Good stuff man, this is my EDC as well as my Smith & Wesson .40 subcompact.
appreciate the vid bro keep up the good work
Thank you !!
Have a similar set up except I have XS R3D 2.0 night sights, Swampfox Sentinel 2(mounts directly to the slide), I kept all my Shield Arms parts black and have Gen3 S15 mags which I ran about 800 rounds through each mag with 115, 124, 124+p and 147 to check and test feeding (not a single issue)
That’s great man ! How do you like the swampfox?
@@lifewithzae444 honestly I have Swampfox optics on all my firearms and the shake to wake technology as very precise, they’re tough, holds zero and been perfect for me after thousands of rounds.
Can you put a red dot on a 43 or does it have to be the 43x version
No just 43x
Good video man. What do you record with? Do you use a mic?
Thank you ! And I use my phone most of the time but I also have GoPros. In this video it was my phone and no I haven’t started using mics yet but I’ve thought about it
@@lifewithzae444 well I'm subbed now, looking forward to the growth and content! Thanks for the advice!
I appreciate the sub! Never hesitate to suggest things and content you want to see
I just got mine yesterday stoked
Hope you enjoy! 🫡
you only need a good holster and it's ready
At least you didn’t install the light backwards. My god😂 but you need to upgrade the sights to co-witness with the optic. Good video nonetheless. Keep’em coming!
Nice video bro, i just got a 19x and wanna get that same sight on mine
Go for it !!
Click the button either side for the flashlight fast 9 times and on the 10th one itll strobe then after that if you just double tap it itll strobe
I like the build but u didn’t need that plate for yo sight just a heads up
Could you possibly link all the stuff you bought? I like this build! 😊😊 also never owned a glock. Just taurus guns. Your opinion? 😊
Done ! Check under video and let me know if you can see it! But me personally I’ve never owned one but I have shot a couple and I feel for the price they’re a great starting option!
@lifewithzae444 sure can! 😊 thanks!! And i just got the taurus judge last week. Love ittt. But my first gun was taurus g3c and its probably gone through 500+ rounds and havent had any failures. :)
@@compilationtv3832 how is the judge, I want one ?!
@@lifewithzae444 it's actually pretty nice. I personally got the public defender poly from academy. For 449 I think. It's just finding ammo is the tough part. But it feels nice. Grip coild be a bit bigger but thats just me. But it's weight isn't bad. It's obviously on the heavier side because it's a revolver but I like it!! I'd recommend it tbh. :) ☺️☺️
Where you get that new slide from?
Same slide !! I think it’s just the camera making it look different color
I hope those s15 treat you great bro. I had horrible experiences w them but PSA micro dagger mags never let me down
They’ve been good so far, I’m going to keep running them I hope it stays that’s way but I’ve been seeing a lot of comments about those I wanna test some out !
Gen 4 g19 came with a array of different mounting plates.
dis my first time watching it and you put it in fast mo its cool doe 7:24
the tlr7 sub has a tool that comes with it bro to tighten it down nice build tho i have the same setup just on my psa micro dagger c-1 ive changed out a few things like firing pin to a oem glock pin i went the shield arms route as well due to i bought the slide for the dagger first and a glock 43x non mos lower. due to the lowers from psa not being in stock at that time. About 6 months later i got the actual slide from them which i just swapped it all out since i already had the mags
I thought you didn’t need a plate for the holosun on that pistol
Please bro get them 507 screws torque to specs I believe it’s around 15-18 inlbs. You don’t want them screw to break off.
Nice video and setup.
Love the setup bruh, but can I get them 10 round Glock mags?
Yes you can
Adapter plate not need tbh, I boy a holson HS507K x2 and it has perfect fit
Is this setup comfortable for conceal?
Yes !
Bro please build Glock 17 please or 19 I need a good video like that u make the best videos & explain the best it gone hit mad views
Gotcha 💪🏾
@@lifewithzae444 brudda pls what instagram need to follow asap 💯
Good video.
I build custom glocks and a 43x is basic same as the Sig P365 or kimber Mako R7. all that is its a Holosun 507k
Cool man I'm happy for you brotha
Appreciate it man 🙏🏾
What holster you using?
I like the katana magwell rhe ither ones seemed to bulky
where da switch at?
😂😂 i died
Nice! Me personally, had issues with the S15 mags plus I didn’t want to change the mag catch. The PSA micro dagger 15 round mags worked flawlessly and are less expensive.
You saying the dagger mags fit the 43x without doing anything
I love the psa. Mine run flawless
@@none-of-your-business404 yes. They have 2 kinds. One with the slick finish! 1000’s of rounds through them and no issues.
Whaaaat? I thought the S15 was the only option out there for that bigger capacity. Definitely gunna check that out cause I can't bring myself to get mags with all the bad reviews.
@@snappishmonkey5630 def check them out. You won’t regret it.
What an empty box was that 😮. You gotta buy everything extra that Canik gives us in the box for free was shocking.
Ima get exact same build nice video man
Thank you!! Good luck on your build!!
Nice setup bro just subbed
Thank you I appreciate that !!! 🫡
Can I ask why do you need the plate?
Nope
There are nubs in the MOS system that aren’t accommodated for by the Holosun brand.
Without the plate, you’d need to file or mill those nubs down
You forgot the Antimatter Micro Wing, boss
Putting lock tight on a screw that already has lock tight is crazy 😂😂😂
I know it seems crazy but you can’t trust factory glue plus it’s already dried up it’s kinda pointless
What happens if the optic gets broke? How you swap it
That's not even loctite, its nylon thread that helps with retention of the screws, loctite is a must
@@lifewithzae444The blue stuff on the screws is Nylon not Loctite
What kinda camera u got?
I was actually using my phone in this video, iPhone 14 Pro but I also use GoPros
Nice set up. I just don’t trust the S15, I had to pull out on 3 wild dogs yesterday and the mag dam near fell out. I immediately went back to the original magazines
Dang happy you’re okay tho !! In your case stay oem and stay safe !
That holosun can mount directly to the 43x no plate needed
True but you have to grind down the rear posts. It's a fairly easy process
definitely need a plate bro if u actually have one, you know
@@Morquezwrld yea I got one
Definitely needs a plate
@@adamal-khouri435 I don’t have one on mine
I have this same setup without the magwell and added co witness sights from night fusion
Should've got the 30sf or 29sf
this must be a gen 2, i got mine probably 3 years ago i don’t remember them even having an mls slide for 43x out then but i could be wrong i know for sure they didn’t have an option for rails
I’m not 100% sure when the mos was released but I do know it was two different versions of it when I was first introduced to it. I was always told to make sure I got mos so I wouldn’t limit myself Incase I wanted an optic
thanks now i need a magwell i didn't know I needed lmao
Go for it bro !
What’s the purpose of the mag well if the mags work anyway? All it does is make the print bigger.
@@TheBlackconsigliere magwells assist in quicker reloads. And they don’t necessarily make the print bigger depending on the person carrying and their carrying style it may not affect them at all. Plus they help seat your hand also on smaller guns or even on bigger guns depending on hand size