Xbox Series X Repair Ripoff?? - Extended Version
Вставка
- Опубліковано 17 чер 2024
- Repair Shop XSX LONG - The seller of this Xbox Series X said they were ripped off by the repair company they sent it to, and in this video I'm going to try to fix it. The HDMI port will need some repairs, and we will have to replace the Retimer chip. If we get lucky this might be an easy fix!
►Tools & Parts I Use (paid link): www.amazon.com/shop/tronicsfix
►TronicsFix Game Console Repair Forum: www.tronicsfixforum.com/
-----------------------------------------------------------------------------------------------------------
Instagram / tronicsfix
Facebook / tronicsfix
Twitter / tronicsfix
Website www.tronicsfix.com/
-----------------------------------------------------------------------------------------------------------
Tools I Use:
-Protech Toolkit: Amazon (paid link) geni.us/QVCjRqq
-Torx Security T8: Amazon (paid link) geni.us/oNFUeS5
-PH00 Phillips: Amazon (paid link) geni.us/u9Elh
-Tweezers: Amazon (paid link) geni.us/j4WX1
-Electric Screwdriver: Amazon (paid link) geni.us/Vtja
-Thermal Paste: Amazon (paid link) geni.us/JToknC
-Canned Air: Amazon (paid link) geni.us/Fbk7arC
Equipment Used:
-Hakko Hot Air Station: Amazon (paid link) geni.us/UCTLRXW
-Nozzle for hot air station: Amazon (paid link) geni.us/PnIG
-Hakko Soldering Station: Amazon (paid link) geni.us/OU4v
-Hakko Air Filter: Amazon (paid link) geni.us/wBHy05k
-Digital Microscope: Amazon (paid link) geni.us/JLqdVD
-Stereo Microscope: Amazon (paid link) geni.us/kkb3aa
-Kester Solder: Amazon (paid link) geni.us/6Z4Y
→Business Inquiries Email: steve@tronicsfix.com
TronicsFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this UA-cam channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TronicsFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not TronicsFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
(*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.” - Наука та технологія
Easy to forget how tiny some of those components are until the GIANT cotton bud appears! 😮
Lol. I wouldn't be able to work on them without the microscope for sure
That's exactly what I was thinking at that part :)
the shinny effect on the perfect amount of thermal paste isnt there ahahah
Yeah i was expecting it
Really glad I saw this warning message first, I'd have been so shocked if I was not warned prior.
Because it's not the perfect amount.
The perfect amount is a small dallop and then spread across the surface.
Love your videos so much. I hope I can find my original ps1 that I got for Christmas as a kid and possibly have you fix it. My sister Ashley spilled koolaid on it by accident, she is no longer with us so it would be bittersweet to have it fixed
Once again nice repair steve❤
Thank you!
The bubbles in that flux was beautiful
Why is that so satisfying? I love it for some reason...
Nice to see you looking better❤
Hello, been watching you since forever, been doing this as a hobby now too off and on when I need stuff, so far fixed two joycons one with drift one with a faulty bumper button fixed a few xbox one controllers with broken buttons and sticks and I fixed a dead xbox one x, a steamdeck I'm loving it. Been really getting into it. Thanks dude.
You’re looking so good! What a beast
Now its at a real professional repair company 💪
Well done once again Steve
Another great job :) loved it.
Nice work Steve
Awesome Video TronicsFix🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂
You are an amazing dude😂😂i love your videos
Why’d they go through that much work to fix those traces, just to not have the joints soldered to the board correctly, which they could have done much easier than the traces being fixed? And then allegedly steal a part off of it?
Steve, thanks for tour videos and im very happy to see/read you're getting better! Admire your work and passion for such things!
Once again your beautiful solder work it’s like magic. What brand and types is you iron and hot air I don’t t know good equipment yet and yours appears superior
Most repair shops don't like fixing HDMI ports. My local shop does not do them. They claim that it cannot be done because it will cause the board to be overheated.
It's because they are inexperienced and don't want to destroy peoples consoles...There are too many "repair shops" that claim to be able to fix them and then end up mangled HDMI ports...I would rather them just say they don't work on that part
Funny Because they all promoted that they can fix it.
Crazy, that's like 90% of the fixes I do.
That just means that they don't do know how to do them and don't want to learn. It's 100% safe to replace HDMI ports on these boards if you know what you're doing. On top of that this repair is quite profitable. You could probably run a good profitable business just replacing HDMI ports.
I think repair shops should have mandatory training on how motherboards of all types are actually made. (like watching that TLC SHOW "How It's Made". 10x more repairs will be done weekly.
Good job my guy!
At this rate they should just send everything to you guys at Fix it so many bad repair shops ripping people off it’s just sad and why I’m learning to repair for myself.
Your flux is very nice
I went through a similar situation, the shop basically used my Xbox for parts. They replaced the power supply for a bad one, it was missing the wifi/bluetooth card, it was a different black housing for the entire system chassis. It only needed the power & eject ribbon cable replaced and they tried to screw me over. I took it back and told him to replace it with good working console and he agreed to his mistakes.
After all the trace fixes you would think they could have done the chip? Great work, another one saved.
Size matters! Keep the big long ones coming @Tronicslongs ftw!
Thanks Steve.
I hope the original owner reported that shop to the BBB.
Oh man, I was getting frustrated just watching you struggle with that chip and especially that passive. I wouldn't have been able to get through it if it were me doing the work.
What is the small iron you use? the tip looks amazing
That shop owner would be coming back to a shop with a brick through its windows if they did me that dirty.... Wtf
You and me both.
Then again we don't have the shops side of the story . That's if the seller took it to a shop...🤔
steve please upload a short with an update about your health condition
Hairs are growing back so I guess he's done with chemo and looks better and better! I hope he will post some positive news soon.
He is in remission now so all good currently and hopefully it stays that way
I've been posting my most recent health updates to our website here: tronicsfix.com/pages/steves-health
Repair shop told me that my tablet not fixablle, when get it back from them screen was cracked.
Sounds about right...
The Master at work.
Other shop - It can't be fixed
Steve - Hold my soldering iron
I missed the perfect thermal paste sound effects lol
Another huge Steve W.
Nice video
Glad you liked it!
May I ask what liquidation site you use?
From the previous owner's description (expedited fee, declared unfixable) and the repair shop's work, it almost looks like this was a NorthridgeFix job. But why they would take the retimer chip, I don't know.
I’m on the side of that sellers story, shady repair shop charged them a no fix fee, stole his retimer and probably said “you sent it to us broken anyway why would we put it back” happens all the time.
Ugh i still need to replace that hdmi chip. My first attempt melted through the encapsulation of the ic. Thank god i was wearing a mask and had ventilation going. The second attempt took out some traces. Ill have to attempt this one again at some point.
I has question, how do you keep the tip of your soldering iron so clean?
Mine keeps oxidizing and I use Tinning as wel as good quality solder. I also use copper to clean the tip.
PS love your videos and you have inspired me to start working on getting better at soldering as well. :) Thank yous
Do you use leaded solder?
@@maxflute7893 I am using Lead Free solder.
Hello everyone. Good content
I posted xbox 360 on ebay for 19.99, no power, i really wanted to open it but wasn’t confident enough to do so, i would love to see you try and fix it, send offer as well if you like !! Cheers
Yeah, this would be a no fix in my shop as I don't have sufficient experience in re-laying traces. But unlike the shop this guy took it to, I have a no fix no charge policy.
They said that cause they aren't you!!!
I have a xbox elite series 2 controller and the right bumper keeps going out. Ive taken it apart multiple time and cleaned the switch and use air pump to blow out dust. Still broken. Are you able to replace the switch
I wish I had your skill; the HDMI port on my Series X is busted.
will you ever share this channel on your main channel
Yeah, at some point I will.
They said it was unfixable because they stole the chip and didn't think he'd notice and cut his loses.
Green tuff thermal paste? Looking like thermal goop.
What hapened to the 'halo' effect... It's not the perfect amount without that.. 😔
Ha, ha, we leave it out of the long version of these videos.
Need help 😫 I have an authentic copy of Pokemon Gold that doesn’t save after a battery swap. Tested battery, it’s good. Battery installed +\+ -\-.
Pins on SRAM and other chips appear solid. No corrosion detected.
I have no idea what else to do. Any suggestions?
It was not repairable because they jacked the chip out his console 😂
What flux is that, Steve?
I use Kester Flux it look like that
Kingbo
Master
My man
Come on man you know that repair shop for them over
I guess when you like taking things apart you put things completely back together.
Repair shops arent really good for consoles or laptops, maybe a battery replacement or screen for Phone and tablet thats it
Is that thermal paste or TOOTH paste?
whats with how rough console gamers are with their stuff lmao
i have a consoles that need a fix i lack the skill and knowledge to do it
New flux?
I wonder how much material you would have to work with if all your audience sent you their failed repair attempts. Probably quite a bit. 🤪
Lol, judging by my email inbox it would be a lot!
OLD ppl with video games fetish
Dude it's all so tiny...
Yooo
Some people are scammers
Haven't you heard the xbox series are ripoffs.
SO.... the seller has the time/tools/skill to repair an hdmi and its traces... but needed to send it out to a repair place... sure. Not sure whats more entertaining, the repairs or the nonsense stories people come up with.
There's plenty of things I have the skills to do but would still rather pay a shop to do for me so I can spend my time doing something else. There is absolutely nothing wrong with the seller's story.
@mjc0961 are you missing the part where the seller still did the repair themselves after the initial failed shop repair... but still didn't repair it, despite initiating a repairing themselves.. so sent it out again. That's the problem with the story, not the idea of paying someone to free up your own time. I'm sure that's how you free up your time; Have someone cut your grass poorly, then go out and re-cut it yourself, but only 99% of it, then hire a new company to come back and cut it again to finish that last bit of grass that you decided you wouldn't because you wanted to do something else with that last 20 seconds.
هر کسی لیاقت کلمهی ناجی رو نداره!!؟!
Gonna be honest, buddie, that was painful to watch. You really need to clear the unleaded solder first before you replace that chip. That's why you were struggling, dude.
1100 degrees???
Yeah must be Fahranheight but even so that's nearly 600 celsius
Yeah 450c would be the hottest you need to go 500c maximum...
@@DJ_Sycottic :)
Yep, these boards are really thick and take a ton of heat.
@@TronicsFixLongs So that's in fahrenheit then ? and must be close to maxing out the hot air system ?....cheers :)