EMF HOUSE OF HORRORS! Three sources of HUGE magnetic fields!
Вставка
- Опубліковано 4 жов 2024
- Elevated magnetic fields can cause serious long term health problems. The problem is that you don't know they're there unless you test. ALWAYS be sure to test a home before buying or renting.
The meter I use in this video is the Gigahertz Solutions NFA 1000. It's the most accurate meter on the market for both electric and magnetic fields. safelivingtech...
For a good meter that's more affordable, I recommend the ME3030B - safelivingtech...
To test the dirty electricity in your home, I suggest using the meter by Greenwave which you can find here: greenwavefilte...
The BEST meter for radio frequencies is the Safe Technologies Safe and Sound Pro II: safelivingtech...
The Safe and Sound Classic is also a good radio frequency meter that is very simple to use and less expensive than the Safe and Sound Pro. It just doesn't give the specific readings in numbers: safelivingtech...
Want more tips on how to make your home healthier? Download my free guide 'Top 10 Ways to Reduce Your EMF Exposure' here: sleepeasy.kart...
Check out my website here: wholehomeandbo...
You can also join my Facebook group for more tips on staying healthy in our modern world: / 1004227729926803
Cathy Cooke
Whole Home and Body Health
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Thanks for sacrificing your body to science Cathy... Haha. And actually, our ability to see the negative effect on your mood etc., and then your investigation and narrative while on that journey has led to an exceptional video - rich in practical application. Well done!
Thanks Chaz! So glad you like it :)
Remarkably informative! Thank you!!! They put a new meter on our house and I even ASKed if it was a smart meter and they said "no." Today I found out it is, so there's a VERY strong chance it's part of what's contributed to our problems in this house. Thank you so much. I'll use my little Cornet and see what that shows. Invaluable!
Sorry to hear this Donnamarie - this is a common story. You might be able to shield it to reduce some of the RF that's getting into your living space
Wow! I'm sorry you had to endure that terrible situation.
Dang girl, sorry that happened to you! Thanks for the overview...so many things can make things go bad quickly.
I think my house is like this :S it’s 5 years old I’m wondering if new builds are worse. I definitely have ground current- will be hiring some meters soon to investigate
Wow this was a nice frame of ref, thank you. I have a similar set of readings at my meter. It's 30 Milligauss up against the meter and about 118 against the conduit. In the yard about 10 feet away it's between 1-2. I'm not even sure what I'd tell my power company.
If it's 1-2 mG inside your home you want to try and deal with this. You may need to consult with someone like myself or other professional to help you make a plan of action.
@@cathycooke Thanks for your response I love your channel! You've given so much which is appreciated. Not looking for a freebie, just sharing for all. You're probably too far away - I'm on the east coast. I honestly think I'm in a bad location. My house is flanked by two streets with power lines close front and back. So with the Main off, it's around .5 mG in the majority of the rooms except for one which I'm planning on moving my sleeping quarters to. The room I'm in now is 1 mG (AC running in the window). There's a couple of old circuits with knob and tube wiring. I've been planning on gutting it and remodeling w/ MC cable but then got ill with lyme and lead poisoning. I'm slowly getting better and am having the best year yet after over 15 years of struggle. Spent 10's of thousands on my health and have learned quite a bit about EMF, but it always leads me down a rabbit hole and it's hard to make things work with a busy work life. I'm grateful to your frames of reference because I didn't realize what was considered high for mag fields. And since going that close to my meter getting the readings, I realize it's the mag fields I'm sensitive to, not the RF so much (flare of symptoms). So great step forward and I have you to thank. I have some things I'm going to do starting with a room I will remodel as a 'safe room' complete with MC Cable and RF shielding for that sleep sanctuary.
A few nights in a b&b with these problems isn't good, but consider what it was like for previous owners or renters and families to live there with no idea what was going on, before it was a b&b. Thanks for the great information!
Great job!
Thanks Rob!
OMG!!! That's a deadly environment.
no doubt
Is 0.3, 0.4 milligaus considered still safe? It’s so close to 0.2. I was told under 0.5 is good and over 1 milligaus is dangerous
You seriously may be an answer to my prayers. I am wondering how I could get a hold of you? Or talk with you …. Something is most definitely wrong in my home I think like the light switch & fan switch in main bedroom register on a RF meter 18 & 19 …. I have consulted many electricians they see no issue.
shoot sorry to hear this. You can book an appointment with me here: calendly.com/whbh or visit my website here: wholehomeandbodyhealth.com/
@@cathycooke ok thank you I am going to !! I have been looking for someone like you!
I have a Nissan and can turn the bluetooth off through the display/radio but must do it every time the car is started. Would like to disconnect it permanently.
I'm afraid to buy any car made after about 2015, for this reason.
@@MGillDesign We just traded in the 2015 Nissan for a 2017 Ford truck and you can turn the bluetooth off and it stays off! I was SO happy 😊
@@TruthSeeker-ee8tj nice.
Do you inform the owners of the info you find or show them the videos?
I did inform them but they were not interested in learning more.
n-g in low side of transformer in furnace I suspect.
Yeah me too
Please help if you can! I'm having a similar issue. I just got a new panel installed and wired everything exactly like it was on the old panel. With the old panel I had no issues whatsoever. My magnetic fields were very low everywhere in the house.
Before we could install the new panel I had to have a weather head put on. The old one fell off at some point and we were getting water in the panel. The utility company came out the day we replaced the panel and disconnected the service wires at the roof where they come in from the pole. He was nice enough to install the weather head for us. He also disconnected the meter as we needed to replace the service wires coming from the meter going to the new panel because they were corroded. We finally finished installing the new service wires and the new panel and the utility company came out and turned everything back on.
Fast forward to the next day, I pulled out my meter and started measuring and across the living room floor I was getting ridiculous amounts of magnetic fields. It was never like this before. There was a small amount before installing the new panel, around 2-4 mg because the AC unit wiring ran across the living room floor in the basement. Turning off the heat would always reduce the fields down to 0.4 or less. But now turning off the heat does almost nothing and the fields are no longer 2-4 but now 10-20 and the closer you get to the wall where the panel is installed in the basement, the higher it gets. So pretty much right above the panel in the living room I'm getting over 100mg on the floor. This was never ever an issue before. The fields are not only much higher but they also carry a lot further than before.
I went in the basement to investigate and turns out the AC unit wiring is maxing out the meter. Over 100 mg on both wires. For now I've turned off the breakers which helped a little but there is still a huge field across the living room floor coming from the panel it's self because it's installed in the basement right below the living room.
When I turn off all breakers in the house the field finally goes to 0.2-0.4. But turn on even one breaker the field jumps to 10mg immediately. And as I turn on each breaker one by one the field increases gradually until it maxes out the meter. When doing this test I have the meter laying flat on the living room floor above where the panel is installed. I'm using the trifield tf2 to measure.
So.. After watching this video today, I went outside to measure the meter and conduit as you did in this video. And the meter is giving me 50 or more mg, the conduit above the meter is giving me 30-40 mg, and the conduit below the meter is giving me over 100 mg which maxes out the meter.. As a side note I walked across the yard to my neighbors meter and conduit just to compare and I only measured at the most 5mg on my neighbors meter and all conduit. So I know the numbers I'm getting on my meter and conduit aren't normal.
Now.. With all that being said and sorry for the entire book I just wrote lol.. What do you recommend from here? As I said we made sure that everything in the new panel was installed identical to the old panel. I do not believe the problem is on my end after measuring the meter and conduit. It seems the issue is coming from the service wires and the meter.
What do you think? How do you recommend I proceed from here? How can I get the utility company to come out and take a look and try to fix the issue? I'm not even sure what to say to them when I call. I would hate to say something wrong and have them say they can't come out for something like that. I'm really at a loss here as to what to do. Aren't high fields like that considered a code violation or something? Please help me! I'm literally devastated and don't know what to do. I had my numbers so perfect before installing the new panel. What can I say to the utility company to have them come out and take a look?
I tried to be as detailed as possible when writing this. If there is more info you need from me just let me know. You seem like my only hope. I feel like me seeing this video today was meant to be. I hope you can help me. Thanks in advance.
This is a complicated issue and one I can't give advice on based on the small amount of information I have. There is definitely a net current issue happening, and it sounds like a wiring error in the panel if it was not there before, or perhaps a loose neutral. If you'd like to consult on this you can contact me at wholehomeandbodyhealth.com/ I just don't want to give bad advice without knowing all the details.
@@cathycooke I will give you a call tomorrow. I can call you at the number on your website correct? I really appreciate your help!
@@NoSmokeG Yes that's correct.
My furnase says 600 mg
One of the worst things is when you can't control you brain cortex to voice from emf.
My home magnetic fields don't drop below 3.5mg what do I do??
I would recommend hiring a building biologist to come figure this out for you. You need to know whats causing the elevation to see if it can be fixed.
great video. quick question, Im deciding betwern the alphalabs uhs2 and the gigahertz solutioms ME3851A.
any input? the ME3851A is highly rated but I see its single axis.
what would recommendatiom be?
What kind of meeter are you using. Trying to find one that works.
I'm using the Gigahertz NFA 1000, it's a fantastic meter, not exactly cheap though: safelivingtechnologies.com/cart.php?action=add&sku=SLT-1032&couponcode=WHBH-5
Which brand emf meter do you recommend that doesn’t cost a fortune?
I left a bunch of recommendations in the description under the video.
Where can I buy that meter..😢😮😢😮😮😢
safelivingtechnologies.com/cart.php?action=add&sku=SLT-1032&couponcode=WHBH-5
Hello I really enjoy your videos. My family and I are trying little by little improving the EMF/Radiation in our home. We also bought filters for dirty electricity to plug into the sockets in our house. But now we heard that yes they will lower the dirty electricity, however, they will produce a magnetic field and instead we should purchase “power perfect box” which is installed between the smart meter and electrical power box and will filter your whole house electricity. Have you tested the magnetic field after installing filters for dirty electricity? I am just confused because I hear conflicting information. Thank you
Yes this can be a problem, but not always. If you have existing wiring errors, then the plug in filters will increase the magnetic field from this problem. IF you don't have wiring errors, then it shouldn't be a problem. There is no way to know this unless you get an assessment from a professional, which I would recommend. The Power Perfect box will not solve your problems. You first need to know what exactly you're dealing with, and then address those issues from there. You must measure first.
Thank you for your reply. I was going to purchase the alpha labs Gauss meter that you recommend from one of your latest videos to measure the magnetic fields around my home. Before having to hire another professional, would it be effective to use the alpha labs Gauss meter to measure the magnetic fields before and after installing the filters?
@@perezchiro6919 yes you could do that. Here's a link that gives you 5% off that meter: safelivingtechnologies.com/cart.php?action=add&sku=SLT-1388&couponcode=WHBH-5
Hello from Spain. Whats th model of the yellow meter you used to do this video and what kind if waves can be detected with It ? Thank You.
Sorry, I dind read the description of the video. Thanks.
For the rental car, is the Bluetooth an issue when the car is turned off?
Not generally
How do I find someone like you in my area when buying a home. I am so afraid I will buy a home I can not live in. I deff. can not be around a smart meter. I am severely electrosensitive and I have been diagnosed by a neurologist.
Where do you live?
@@cathycooke2411 I live in Mass
@@melaniemoore5635 Hmm, not sure if I know anyone there. You can look hear though to find someone close: buildingbiologyinstitute.org/find-an-expert/
That's horrid.
I was wondering of someone could give me some advice. I have an emf meter. Im living in a building that seems to have a powerful magnetic field. The magnetic meter measuring in mG. Which only picks up the magnetic field when I set the meter on weighted frequency, instead of standard. Can someone tell me the difference of these 2 settings?
sounds like you have a Trifield meter, is that correct?
@@cathycooke yes that's correct.
Do you know what the difference is of these 2 settings?
the weighted setting is taking into account electromagnetic interference so will read just a little higher than the standard setting.@@DylanKill-my4lb