Wires Chewed or Broken in Your Car or Truck? Fix It the Right Way with a Replacement Connector Kit
Вставка
- Опубліковано 9 чер 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/4/an/electrical-auto...
Wires do get chewed up in cars and trucks from time to time, especially newer vehicles that are using soy-based insulation! Aside from that, connectors can weaken and break in cold weather environments. Either way, it's good to know that you can replace wires and connectors in your car or truck with a replacement connector kit! In this video, Andy shows you some expert tips on how to install a new wiring connector in your car or truck!
0:00 Wires Chewed or Broken in Your Car or Truck? Fix It the Right Way with a Replacement Connector Kit
0:25 Reasons Wires or Connectors Break or Get Chewed
1:12 Replacing a Wiring Harness Connector
3:21 SUBSCRIBE! | Shop 1AAuto.com Link Below!
🔧 List of tools used:
• Crimper
• Pliers
• Wire Cutters
• Wire Butt Connectors
Subscribe: / @1aauto
Check out our playlist:
Tips & Secrets only Mechanics Know: • Tips & Secrets only Me...
For More Info visit us at 1aau.to/h/f4P/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great to know you sell these connectors. Keeping that in mind for future repairs Thank you.
Very helpful. Thanks!
The best prevention is having cats lol seriously though, thanks for this video. Very helpful
The mice liked my injector wiring on my old 335. I used liquid electrical tape and it worked amazingly. I figured if it fails I’ll just buy the harness so it was worth a try.
Personally with repairs I have done I would not recommend crimp and seal connectors due to the small pin hole from crimping may let corrosion happen quicker.
I would highly recommend crimp solder seal connectors due to the solder will imbed into connection and help prevent corrosion. Then you can always add heat shrink over it too.
Just my 2 cents
Thanks
Soo…. Do you sell SOUR wire connectors??
I got a comment maybe you help me out it ain't on that vehicle I'm trying to figure out how you take that mirror off in the windshield and I heard if you try to take it off or put it back on it might break the windshield is that true or not please let me know if you got a video on it but I got a 2013 ram pickup truck
spray the wires with . NHOU which is a Mouse Out Deterrent Spray
I would have heated the connector after crimping.